CNBM Poly 170W Solar Panel with TUV UL CE Certificate For Residential

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
100 watt
Supply Capability:
1000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 170 Number of Cells(pieces): 36

Product Description:

CNBM Poly 170W Solar Panel with TUV UL CE Certificate For Residential 

Introduction


 Each module is rated by its DC output power under standard test conditions, and typically ranges from 100 to 365 watts. The efficiency of a module determines the area of a module given the same rated output – an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. There are a few solar panels available that are exceeding 19% efficiency. A single solar module can produce only a limited amount of power; most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, a solar inverter, and sometimes a battery and/or solar tracker and interconnection wiring.

Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells.

CNBM Poly 170W Solar Panel with TUV UL CE Certificate For Residential

Suggested application

Home lighting business lighting,

Garden lighting, pavement lighting    

Farmer household lighting

Decorative water pump

Traffic signal lighting

Industry area

Business area

Solar Power Plant

Product feature

Modules are made of Monocrystalline or Polycrystalline Silicon cell.

Materials and color of the solar panel frame: Clear anodized aluminum alloy type 6063T5 Universal frame; Silver-white color;
The output connection gathers the coupling: Selects conforms to the IEC-612615; 2005, class II, IEC61730 international standard; Airtight waterproofing binding clamp;
Module seal structure: The surface is thick, the high diaphanous rate armored glass with solar cell board special-purpose 3.2mm becomes after the high temperature lamination craft. The back selects has waterproof and anti- aged performance fine TPT materials. The entire block battery board has, the waterproofing, the anti- aging airtight and so on the fine performance;
Power tolerance: +/-3%

Packaging

International standard cartons (according to the requirements of customers)


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:how to power a 400 watt heater with solar panels and batteries?
You could do that, but it would be an expensive way to go. If what you really want is heat, consider heating water directly with conventional solar water heaters, and storing it in a large, insulated tank. You can then circulate the water through a conventional radiator at night.
Q:Is getting solar panels worth it for your home?
It depends upon how you look at things. If you are looking for a decent return on investment, or a business decision, it is probably very unwise. In most cases people would see a far better return in upgrading insulation in ceilings, walls, and windows to much better insulation than they currently have, followed by proper resizing heating and air conditioning to smaller unit size to fit their lesser need as a result of the insulation. The heat an air conditioning units should be the highest efficiency available. The return on the above can make a positive and economic investment in many cases. If you have done the above first, and have money to spend and do not care about the return on it, then you can play with solar or wind. However, typical cost of generation of solar and wind energy is about $0.22 / KWH and you can purchase from utility at about $0.0/ KWH including generation and distribution so this is not all that prudent.
Q:What is the real cost of Solar Panels?
The cost of solar is measured in dollars per watt. That means the cost of a cell that can make one watt continuously in full sunlight. A friend of mine is starting a new job to set up a new solar cell factory and he said the present cost is $3 per watt, but that they expect to get that down to $ per watt in a few years. They can be damaged by weather, just like any regular roof. My insurance agent asked if I had solar panels, so it is a factor in insurance cost. I never heard of recycling or disposing of old panels, maybe because they are so new and last so long that not many are ready to be disposed of yet.
Q:How do you install solar panels?
You need to determine how many solar panels will produce the amount of power that you consume now. You can check your bill for the number of kilowatt hours (power) you will need. There are websites that will help you calculate the intensity of sunlight in your area. There are other websites that will help you determine the average daily sunlight. The sf of your house has no importance. The amount of power you use is independent of the size of your house. You hook up solar cells in series to increase voltage. You hook up solar cells in parallel to increase current. Power is voltage multiplied by current. Most modern houses are supplied with 200 Amp service at 240 volts AC. The solar panels produce DC power. The grid in most places provides AC power. So you will need a AC/DC power converter. The sun does not always shine so you will need a storage battery bank capable of storing all the power you will use at night.
Q:Home solar electricity advice? Making the solar panels accessible?
Modern solar electric panels rarely fail. Because of this, if you would be installing them over a roof that only has a few years left on it, it would be better to redo the roof, first. In the unlikely event that a panel needs to be changed, this can be done in 30 minutes or so, because the panels are mounted on racks, with everything simply plugging together. I have never personally seen a solar installation go bad, but from what I hear, the inverter (a box that goes in next to your electric service panel) is usually what burns out after 5 years, assuming the install was done right in the first place. If you were to call roofers to repair your roof, they would somehow be able to get to your roof, by ladders, or a special truck. Solar installers use the same kind of equipment. They won't have a problem getting up there. A solar electric system is actually a very straightforward thing. No matter who installs it, if there is a problem, another installer should be able to diagnose and fix it.
Q:Will a 3w Solar Panel Charge A 55ah Car Battery?
55ah Car Battery
Q:Solar Panel watts needed?
Mimi: Solar Power is not really that economical, and has many other disadvantages as well. You did not specify much info in your question as to the size of the water or air pump. So let's make some assumptions to get you some numbers. ) Let's say the water and air pump are about HorsePower (HP). The HP pump , considering efficiency losses, will draw around ,000 Watts , or kW. 2) The 600 Watt LED Light is quite high --- they are usually much smaller lights 40 Watts or less. BTW --- these LED lights are very expensive light as well. Just so you are aware. Between the pump(s) ( maybe 000 to 400 Watts) and the 600 Watt light ----- and without knowing the specifics --- you are probably looking at around 2,000 Watts or 2 kW. A 2 kW Solar PV unit will run around $20,000. The PV unit will only run at full capacity during daylight hours. They usually average about 5 hours per day. So you will only be able to run your pump and LED Lights during the middle of the day --- maybe 0:00 AM to 5:00 PM. If you want to run the pump and lights after sundown, you will need battery back-up. The electric storage batteries will likely run about an extra $5,000. They will last about 5 years. If you decide this doesn't work out well --- you can stay with the local utility --- at $0.0 per kWh. It will cost you about $0.0 per hour to run the pump --- maybe 30 to 50 cents per day. It would cost you about 6 cents per hour to run your light. Maybe 30 or 40 cents per day. You could essentially run your pumps and light several hours each day --- all for about $ per day, or $365 per year. This sounds like a less costly alternative.
Q:Why should people use solar panels more for houses?
Right now, the U.S. government and some state governments (like California) are offering subsidies on solar panels for businesses and houses. With these subsidies, anyone infesting in solar power today will have their investment returned in less than 0 years. This means that with these subsidies, solar panels are basically paying for themselves; they're free. In addition, excess power generated on solar panels can be added to the local power grid and, if you're lucky and can set it up with your local power distributor, the power company will pay you for the power you generate. This are just financial reasons. Their is also the reduction of power generated by fossil fuels when using solar power which mitigates climate change.
Q:WHAT ARE THE SOLAR PANELS ON POWER POLES?
Here is an article about this. They use the poles (which they already have) and install power panels, the electricity is given into the grid. There are companies in NJ which use google earth to find buildings with large roof tops (imagine all the warehouses !), contact them and lease the rooftops to install solar panels, there a different ways how to finance that (by them, by the company, ....) and they sell the electricity into the grid and receive a certain price for this. Usually the refinancing is 5 - 7 years of the investment, after this is profit for additional 5 - 20 years. Walmart had a project to put solar panels on the super centers ....
Q:Solar Panels Have Faded?
Unfortunately Eileen the panels are bound to fade as its par for the course. Over time much like everything else (from an AC condenser to your knees and hips) everything starts to go south. When did you purchase and install your panels? If this was done within the past few years then something is definitely wrong, and you should have the manufacturer and installer come back and replace the panels....on their dime of course. Is the warranty on your panels still in effect? If so then its definitely something that they have to come back and take care of. There is a company I know of called Sun Electronics that has a 20 year warranty on their products, so if its worth anything you might want to buy your new panels/system from them. The panels around today are more efficient than those of years past, and with the cost coming down due to economies of scale and the tax incentives you might want to consider getting a new system. Sorry to let you down though Eileen!

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range