Carbon Electrode Paste used for ferroally production with low Ash
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20mt m.t.
- Supply Capability:
- 20000MT/year m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
About Carbon Electrode Paste
Carbon Electrode Paste is a self-baking electrode used in submerged arc furnaces for delivering power to the charge mix. Electrode Paste is added to the top of the electrode column in either cylindrical or briquette form. As the paste moves down the electrode column the temperature increase causes the paste to melt and subsequently bake forming a block of electrically conductive carbon. Electrode Paste is essentially a mix of Electrically Calcined Anthracite (ECA) or Calcined Petroleum Coke (CPC) with Coal Tar Pitch.
Specification:
PARAMETER UNIT GUARANTEE VALUE | ||||||
Ash.( % ) | 4.0 max | 5.0 max | 6.0 max | 7.0 max | 9.0 max | 11.0 max |
V.M （%） | 12.0-15.5 | 12.0-15.5 | 12.0-15.5 | 9.5-13.5 | 11.5-15.5 | 11.5-15.5 |
Compress Strength. (Mpa) | 18.0 min | 17 min | 15.7 min | 19.6 min | 19.6 min | 19.6 min |
Specific Resistance （μΩm） | 65 max | 68 max | 75 max | 80 max | 90 max | 90 max |
Bulk Density (G/CM3) | 1.38 min | 1.38 min | 1.38 min | 1.38 min | 1.38 min | 1.38 min |
Pictures:
We can supply below furnace charges, please feel free to contact us if you areinterested in any of any of them:
Coke (Metallurgical, foundry, gas)
Calcined Anthracite with fixed carbon from 90% to 95%
Calcined Petroleum Coke
Graphite petroleum coke
Amorphous Graphite
Carbon Electrode Paste
Carbon Electrode
- Q: What is the striking electrode in the die making? Where is the technical point?
- The electrode in die processing is edm.The discharge produces sparks and forms a "corrosion" to the other pole. The method of machining parts (dies) using this phenomenon is called edm.
- Q: Why graphite can be used as conductive material?
- Graphite used in the electrical industry requires a high degree of particle size and grade. Such as alkaline batteries and some special electric carbon products, requiring graphite particle size control within the scope of the project, grade above, harmful impurities are required in the following. The graphite used in a picture tube for television is required below. As a wear-resistant and lubricating material, graphite is often used as a lubricant in the mechanical industry.
- Q: Where is the graphite electrode scrap?
- Vortex ring formed in a highly ionized internal ICP can be regarded as the secondary coil of the transformer is only one turn, and the work coil water is equivalent to the primary winding of the transformer, the coupling between them, the strength and direction of the magnetic field varies with time, the electronic and ionic field acceleration continuously changes its direction of motion. Lead to Joule heating effect and incidental ionization. This gas forms a new and stable "electric flame" light source in the quartz torch tube in a very short time.
- Q: Is the anode of electrolytic water suitable for ordinary titanium wires?
- Graphite firstFirst of all, the titanium electrode is usually not pure titanium, it should be titanium with a metal oxide coating. Secondly, the advantages of the titanium electrode is mainly to save electricity, the corrosion resistance of carbon is much stronger than that of industrial production, if the meaning is relatively large, but it is still in laboratory experiments, electrolysis of water, not what meaning.
- Q: Graphite can be used in acid towers in chemical plants because of graphite
- A graphite electrode coated with an antioxidant protective layer (graphite electrode, antioxidant). The utility model has the advantages of forming a protective layer capable of conducting electricity and resisting oxidation at high temperature, reducing electrode consumption (19%~50%) during steelmaking, prolonging the service life of electrodes (22%~60%), and reducing the electric energy consumption of electrodes.
- Q: How much does a graphite electrode cost about a ton?
- According to purity and quality, the price is 1-6 tons / tonDo not calculate the processing cost
- Q: The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
- In addition, the infiltration of water on graphite is not good, can not get the effect of dust removal. Now there are special graphite machine, sealing system. Air-cooled can be used, after all, the best air-cooled.
- Q: Iron and graphite as electrodes and Nacl as electrolyte solutions. Why do they produce electric current? Graphite and iron react not with solution, can they be connected by wires?
- What happens is oxygen etching negative pole: Fe-2e-=Fe2+ positive electrode: O2+2H2O+4e-=4OH-, of course, the current is produced.
- Q: How can the graphite powder be processed into high quality carburizing agent? Thank you
- So that impurities on the high, so basically can not be processed into so-called quality, and can leave a contact, discuss each other
- Q: What kinds of carbon are there?
- The carbon block can be divided into blast furnace carbon block, aluminum carbon block and electric furnace block. Carbon products can be divided into carbon products, graphite products, carbon fibers and graphite fibers according to the depth of processing. Carbon products can be divided into graphite products, carbon products, carbon fibers and special graphite products according to the raw materials and the production process. Carbon products according to their ash content, and can be divided into multi gray products and less ash products (including ash below l%).
Send your message to us
Carbon Electrode Paste used for ferroally production with low Ash
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20mt m.t.
- Supply Capability:
- 20000MT/year m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
