CALCINED BAUXITE
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10Ton m.t.
- Supply Capability:
- 100000Ton Per Mouth m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery of Calcined Bauxite
Packaging Detail: | 25kg/Bag,1Mt/Bag,1.25Mt/Bag; Or as per Client's request |
Delivery Detail: | 7-15 days upon receipt of prepayment by TT or L/C |
Specifications
Calcined bauxite: 14 years producing experience; self-owned mines; SGS or BV report.
Calcined bauxide specification:
Grade | AL2O3 | FE2O3 | TIO2 | K2O+Na2O | CaO+MgO | Bulk density |
75 | 75min | ≤3.0 | ≤4.0 | ≤0.3 | ≤0.5 | ≥2.70 |
80 | 80min | ≤3.0 | ≤4.0 | ≤0.3 | ≤0.5 | ≥2.80 |
85 | 85min | ≤2 | ≤4.0 | ≤0.3 | ≤0.5 | ≥3.00 |
86 | 86min | ≤2 | ≤4.0 | ≤0.3 | ≤0.5 | ≥3.10 |
87 | 87min | ≤2 | ≤4.0 | ≤0.3 | ≤0.5 | ≥3.20 |
88 | 88min | ≤1.8 | ≤4.0 | ≤0.25 | ≤0.5 | ≥3.25 |
90 | 90min | ≤1.8 | ≤4.0 | ≤0.25 | ≤0.5 | |
Size: as buyer’request
Packing: usually we packing in big bag, 1.25mt/bag; we could pack as buyer’request
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .this removes moisture thereby increasing the alumina content. compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84%to88%.the heating is carried out in rotary kilns.
Applications
calcined bauxite is typically calssified according to its intended commercial application,such as abrasive ,cement ,chemical, metallurgical, and refractory .as raw material for use in high alumina and super duty refratory bricks and shapes ,plastics ,castable refratory, motors, gun mixes, ramming mixes, abrasive grains and other products.
- Q:what materials can make external wall fireproofing paint have the fireproofing effect
- Adding flame retardant or fire retardant materials can be fireproofing, which commonly referred to as the external walls of fire retardant coating or fire retardant coating. Principle: Fireproof paint itself is flame-retardant or non-combustible, so that the protected base material can not directly contact with the air in order to the ignition delay and reducing the burning speed; except that, it also has a lower thermal conductivity, which can delay the transfer of flame temperature to the protected base material; fireproof paint thermal can decompose non-combustible inert gas by heating to dilute the thermal decomposition of combustible gas in protected object, making it difficult to burn or slow down the speed of burning.
- Q:Is the refractory reached British BS standard and used for cables in China at present ceramic silicone rubber?
- Which standard? Please be more specific
- Q:Which refractory is suitable for the tunnel kiln?
- Shuttle kiln refractories requires the good thermal shock properties. Because the tunnel kiln is continuous firing furnace, the temperature in the kiln is long time stable and with little fluctuation. The shuttle kiln is intermittent kiln firing. The temperature in the firing kiln is adjusted by the firing curve. It is with a relatively short time and serious fluctuation. The seal and kiln car take use of the heavy corundum brick. If it is continuous kiln, the alumina hollow ball bricks are used in the burning zone. The seal of the burning zone takes use of the kiln car brick and the seal takes use of the heavy corundum brick.
- Q:The principle of choosing fire-resistant material in Thermal Energy and Power Engineering equipment.
- What thermal equipment? The most simple principle is durable, low cost and with no environmental pollution.
- Q:What are the raw materials of refractory?
- Refractory is mainly resistant to high temperature and fire. Sic refractories are widely used in refractory. I hope my answer will be helpful to you.
- Q:who knows the technology of fireproofing material?
- First: Firstly, you should produce the recipe and prepare the raw materials, for example, if you prepare to produce 1 ton, you should compute the recipe sheet of 1 ton producing; check whether the raw materials are complete; second: make the color and filler thick liquid; add water in order and proper auxiliary in a low speed, then put color and filler (generally we should firstly add something with large oil absorption), wash the meachine after putting the powder. Then seperate them for about 20 miutes in a high speed, until the fineness is qualified; of course, if you need sander, i think you only need sino-soviet differential powder material and non-obvious particles. Third: Paint mixing period: after making the color and filler thick liquid, reduce the roll speed into about 600 roll per minute, add emulsion and proper auxiliary, finally adjust PH and viscosity. Liquid solvent paint, pigment paste: Resin,solvent and pigment ---〉pre mixing---〉stick---〉grinding--〉stick--〉packaging, highlight varnish: Resin, solvent ----〉mixing ----〉stick ----〉packaging, sub-gloss varnish: Resin, solvent----〉mixing----〉matting agent,stick----〉packaging, colored?paint: The primary colorant----〉Color matching by auxiliary color paste----〉stick----〉packaging, aluminum?paint: Aluminite powder soaking----〉resin----〉colour modulation, lustre adjusting----〉stick----〉packaging, powder coat: Resin,filler,pigment,auxiliary---〉mixing---〉extrusion---〉cooling---〉smashing---〉sieving---〉 packaging.
- Q:what's the fire endurance of fireproof?panel?
- fire endurance of fireproof?panel generally is 3 hours. For example, 12 mm non-asbestos fiber reinforced calcium silicate board, fireproof?panel, two single 75 keel. through the monitoring of national fireproof construction materials quality supervision center, it's security and refractory time will reach over 3 hours. fireproof?panel, also called fire resistance board, scientific name is thermosetting resin impregnated paper laminated wood,english abbreviation HPL(Decorative High - pressure Laminate) is fire resistant building material for surface decoration and has rich surface colors,lines and special logistics performance, it's widely used in interior decoration, furniture, cabinets, laboratory table, external wall, etc.
- Q:How is the grading of the level A new material fire insulation material?
- The thermal insulation materials are generally divided into level A and level B according to the flame rating. Level A is the non-combustible material, and level B is the combustible materials. The level B material is to blame for the fire in Shenyang hotel in CCTV building a few years ago . At present, the level A materials are widely used, with some prices even cheaper than the level B material. A level is roughly divided into insulation mortar, phenolic board, rock wool board and foam cement board, ect.
- Q:What's the heat conductivity coefficient of fire-resistant material?
- 5~5 (Unit: W·m-1·K-1). The symbols are λ or K. Thermal conductivity and material properties Thermal insulation material generally is 0, and is related to organizational structure and working temperature. Thermal conductivity of the material refers to the heat transferred from from one plane to another plane in 1 seconds. Generally the thermal conductivity of fire-resistant material is 1. The larger the value is, the stronger the thermal conduction performance is. If the temperature of two planses differes for 1K, then the thermal conductivity is 03~1. The plane cover 1square meter.
1. Manufacturer Overview |
|
---|---|
Location | Tianjin,China |
Year Established | 2006 |
Annual Output Value | Below US$1 Million |
Main Markets | Mid East;Western Europe;Japan;North America |
Company Certifications | The Authentication certificate of Quality Management system |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin |
Export Percentage | 61% - 70% |
No.of Employees in Trade Department | 50 People |
Language Spoken: | English;Chinese |
b)Factory Information | |
Factory Size: | Above 300,00 square meters |
No. of Production Lines | Above 5 |
Contract Manufacturing | Design Service Offered |
Product Price Range | Average |
Send your message to us
CALCINED BAUXITE
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10Ton m.t.
- Supply Capability:
- 100000Ton Per Mouth m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords