Butterfly Valves Ductile Iron Wafer Type DN730

Ref Price:
Loading Port:
China main port
Payment Terms:
Min Order Qty:
100 set
Supply Capability:
80000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Manual Wafer Butterfly Valve Description

A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, worm-gear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc  that is droved by actuators.

2.Main Features of the Manual Wafer Butterfly Valve 

1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.

Design & Manufacture acc. to API 609,MSS SP-67,BS5155,BS EN593.

Face to Face  acc. to DIN3202,API609,MSS SP-67,BS5155,BS EN558.

Pressure test acc. to  API598,BS EN12266-1,DIN3230,BS5155.

Side Flange acc. to DIN2501,ANSI125/150,AS2129,BS4504,BS10D&E,JIS10K

 3. Manual Wafer Butterfly Valve Images


Butterfly Valves Ductile Iron Wafer Type DN730

Butterfly Valves Ductile Iron Wafer Type DN730

4.Manual Wafer Butterfly Valve  Specification  



End flange:

ANSI B 16.1,EN1092,AS2129

Face to face:

ANSI B 16.10

Top flange:

ISO 5211

Normal pressure:





DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel




NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE

Suitable temperature:



Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. 


1. What is manual wafer butterfly valve?

A: Wafer style is the more common of the two and is less expensive than the lug style. The wafer style butterfly valve is just about the standard. It ís so common that no one even bothers to use the word "wafer" when ordering a butterfly valve. It is taken for granted that if a butterfly valve is ordered, a wafer style will be received.


2. How about the Installation of the Wafer Style Butterfly Valve?
A: Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.


3. What is the working principle of manual wafer butterfly valve?

 A: A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:how does variable valve work?
The variable is the valve timing. The spark plug fires a split second before the piston reaches the top of the stroke, to give the fuel a bit of time to burn. But, the faster the piston travels in the bore, that split second gets shorter shorter. So the engine computer changes when the spark plug fires when the valves close, to maximize the power from each ignition stroke.
Q:Butterfly D371X5-16ZB1 what does each letter stand for?
Daily valve pressThe regular model is out of step with you. I can only explain the regularD371X5-16ZB1D is butterfly valve3 is the turbine drive7 is the clamp connection1 is the display opening signX is a rubber seal16 is 16 kg pressureI don't know the other superfluous letters
Q:What is the difference between turbine butterfly valve and flanged butterfly valve?
The worm gear is the driving mode and corresponds to the handle; the flange is connected and corresponds to the clamp. Flange worm valve is generally, the handle of the butterfly valve
Q:D341W-10P-400 butterfly valve, what does each alphanumeric letter mean?
According to JB/T308-2004 "valve type programming method"D butterfly valve3 worm gear4 flange connection1 Structure: sealed type, central vertical plateW sealing material for valve body material10 nominal pressure PN10P body material is chromium nickel stainless steel400 shall be nominal size DN400
Q:Butterfly valves are widely used in 2.0MPa below the pressure and temperature of not more than 200 degrees of various media, right?
First of all, is not the butterfly valve butterfly valve.Butterfly valve in the valve around the fixed axis rotating valve, called butterfly valve.1., as a sealed butterfly valve, it has been developed rapidly since the appearance of synthetic rubber, so it is a new type of shut-off valve. In our country until 1980s, the main role of butterfly valves in low-pressure valves, valve seat using synthetic rubber, by 90s, hard seal "metal seal" butterfly valve to rapid development. There are a number of valve factory can produce steady pressure metal seal butterfly valve, butterfly valve shall be shipped to a broader area.2. butterfly valves can transport and control the medium with water, condensed water, recycled water, sewage, sea water, air, gas, liquid gas, dry powder, mud, fruit pulp and a mixture of suspended solids.The domestic butterfly valve parameters are as follows:Nominal pressure: PN0.25 - 4.0MPaNominal diameter: DN100 - 3000mmWorking temperature: less than or equal to 425 DEG C
Q:Butterfly valve in use when should pay attention to what problems?
In the process of using the butterfly valve, you should timely notice valve state, without excessive loosening, no abnormal leakage, or abnormal high temperature and so on, if there is abnormal, should immediately close the valve, to identify the reasons for the problem, treatment after use, it is also very important.
So, the rubber elbow hose has a hole in it. Your best bet is to get the replacement from the Ford dealer. Yes, you can buy just the elbow part from the parts counter at the dealer. If they start acting all dumb (and won't help you or sell you the part) then, go to a different dealer for the part. Another thing you could try is a used one from the junk yard BUT, it's been my experience that the rubber gets too hard and the PCV valve needs a lot of encouragement to be removed. Sometimes you'll damage the used elbow by trying to get it off of the engine or removing the old PCV valve to put in your replacement valve. That's why I recommend getting a new one straight from the source. They are pretty simple to change with ordinary hand tools and some mechanical know-how. You just pull the elbow off of the port that it's attached to on the engine. The valve will probably have a steel clip that goes around the hose at one end of the valve inside of the hose. You simply squeeze the clip with a pair of pliers and tug at the valve until it comes out of the elbow.
Q:What does the model D373H-16C of butterfly valve mean?
D373H-16C said: D type butterfly valve butterfly valve 3 said, said 7 of the turbine, said clip, 3 said the three eccentric (swash plate), 16 C nominal pressure, said carbon steel. In fact, if you want to understand this, to understand the valve 3.07ghz, later met have to be attached to the valve. 3.07ghzModel for valves, valve number indicates valve type valve should normally be that type, drive type, connection type, structural features, nominal pressure, sealing surface material, body material and other factors. Standardization of the valve type of valve design, selection, distribution, provide more convenient. The type of valve types and materials are more and more more models of the preparation of the valve will become more and more complicated. Although the preparation of our valve type unified standard, but gradually can not meet the needs of the valve industry. At present, the valve manufacturer usually adopt a unified numbering; not uniform numbering, the manufacturer can make out no.methods according to their own situation. Unit two unit three unit four unit five unit six unit seven unit
Q:Butterfly valve is generally used in what position?
It can also be used for switch control of low pressure pipeline medium.
Q:The difference between the directly buried gate and the flange valve and butterfly valve
The flange gate valve is stable and reliable when used in the pipeline, so the flange gate valve is used on the high pressure pipeline.Butterfly valve refers to the closure of parts (valve or butterfly plate) as the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve used in furnace, coal gas, natural gas, liquefied petroleum gas, city gas, hot and cold air, chemical smelting and power generation environmental protection engineering system, conveying a variety of corrosive and non corrosive media pipeline, used to adjust and cut off the media flow.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range