Butterfly Valves Ductile Iron Wafer Type DN560

Ref Price:
Loading Port:
China main port
Payment Terms:
Min Order Qty:
100 set
Supply Capability:
80000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Manual Wafer Butterfly Valve Description

A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, worm-gear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc  that is droved by actuators.The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.

2.Main Features of the Manual Wafer Butterfly Valve 

1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.

6. Bubbles-tight sealing with no leakage under the pressure test
7. Wide selection of materials, applicable to various mediums

Design & Manufacture acc. to API 609,MSS SP-67,BS5155,BS EN593.

Face to Face  acc. to DIN3202,API609,MSS SP-67,BS5155,BS EN558.

Top Flange acc. to ISO5211.

Pressure test acc. to  API598,BS EN12266-1,DIN3230,BS5155.

Side Flange acc. to DIN2501,ANSI125/150,AS2129,BS4504,BS10D&E,JIS10K

3. Manual Wafer Butterfly Valve Images

 Butterfly Valves Ductile Iron  Wafer Type DN560

Butterfly Valves Ductile Iron  Wafer Type DN560


4.Manual Wafer Butterfly Valve  Specification 



End flange:

ANSI B 16.1,EN1092,AS2129

Face to face:

ANSI B 16.10

Top flange:

ISO 5211

Normal pressure:





DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel




NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE

Suitable temperature:



Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. 


1. What is manual wafer butterfly valve?

A: Wafer style is the more common of the two and is less expensive than the lug style. The wafer style butterfly valve is just about the standard. It ís so common that no one even bothers to use the word "wafer" when ordering a butterfly valve. It is taken for granted that if a butterfly valve is ordered, a wafer style will be received.


2. How about the Installation of the Wafer Style Butterfly Valve?
A: Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.


3. What is the working principle of manual wafer butterfly valve?

 A: A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What does butterfly valve nps12cl150d373f4-150lb stand for?
NPS (Nominal, Pipe, Size) abbreviation. Refers to the connection (including flanged and welding end) of the nominal diameter, followed by a digital unit is American Standard inches, 12 inches.NPS12 labeling system.CL is the abbreviation for class, and LB150 means the pressure is 150 poundsD stands for butterfly valves3 is expressed in the form of a turbine drive7 means of connection: to clip3 means sealing: 3 eccentricF4: the sealing material is PTFE
Q:It is different from the butterfly valve butterfly valve
Butterfly valve is clear that the butterfly, because it is so called as valve plate, butterfly valve.
Q:Using a valve spring compressor
save yourself the hassle and throw that thing away go back to your local auto parts store and buy the l shaped spring compresser should be about twenty dollars make sure vehicle is at tdc remove rocker arm bolt remove rocker arms going valve by valve do not mix them up must go in exactly the same order they came out now lightly tap the top of valve with a rubber mallet will help loosen retainers place compresser on rocker arm stud take r.a. nut and tighten till valve locks fall out or can be removed very small dont lose use compressed air to hold valves in place at tdc sorry that should have been first not hard but not easy to do rebuilt 350 motor from the guts out spent alot of money on spring compressers only to find out the simplest one worked the best the one like u got will give u hell i tried napas version craftsman all of them trust me use the L bar
Q:How a car's performance depends on the number of valves?
When talking about car engines, references such as v4, v6, v8, v10 and v12 are not for the number of valves. it is for the number of cylinders. The more cylinders that an engine has, the more fuel it consumes and most of the time, the more horsepower it can make. There are exceptions to this though. Regarding the noise of the engine, i would agree that a v8 sounds very good when it is roaring. Valves are actually the openings for fuel to get into the cylinders and the exhaust to come out from. Most modern engines have two valves for incoming fuel and two valves for the exhaust making a total of four valves per cylinder. hope that clears it for you
Q:How warm is the PTFE butterfly valve?
Ordinary PTFE clip butterfly valve normal temperature tolerance of about 120 degrees, instantly to about 150 degrees
Q:Which is more expensive, gate valve or butterfly valve?
Gate valve.Under normal circumstances, if you need to adjust the good point, to use the gate valve, and if better, you can choose the cut-off valve.But the price is also butterfly valve, gate valve, globe valve increasing.
Q:Can I reuse intake & exhaust valves?
Roll the valves by the stems on a perfectly flat table. If there is no wobble, your valves are most likely not bent. Take them to a machine shop and have them checked for imperfections and reground and they'll be good as new.
Q:toyota mechanic valve adj 1.8l?
valve adjustment . you need to know the fire order. the gage between the stem. rotators the cranshaft. it could be cold start. cylinder need to be bottomed center.
Q:What kinds of butterfly valves are available? What is the working principle of butterfly valves?
Divided by way of drive(1) electric butterfly valve(2) pneumatic butterfly valve;(3) hydraulic butterfly valve;(4) manual butterfly valve;In the form of structure:(1) Central sealed butterfly valve(2) single eccentric sealed butterfly valve(3) double eccentric sealed butterfly valve(4) three eccentric sealed butterfly valve;Sealing surface material score:(1) soft sealing butterfly valve.1) the sealing pairs are made of non-metallic soft materials, which are made of non-metallic soft materials.2) the sealing pair is made of metal hard material and is made of non-metallic soft material.(2) metal hard sealing butterfly valve. The sealing pair is made of metal hard material and is made of metal hard material.
Q:What is the effect of nylon coating on butterfly valve plate? Thank you
Mainly media will not be contaminated by rust on the body, you should say that the central soft sealing butterfly valve, the central valve is generally cast steel or cast iron material, so useNylon coatingLining up. There are soft seals, sealing performance is relatively high

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range