Butterfly Valve Ductile Iron BS5155 On Sale High Quality
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Manual Wafer Butterfly Valve Description：
A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
2.Main Features of the Manual Wafer Butterfly Valve
The material of valve body: cast iron, cast steel, cast stainless steel and so on.
Pressure grade: 1.6Mpa, 4.0Mpa, 6.4Mpa
Connecting type: flange coupling
Temperature range: normal temperature -20---230ºC the thermal slug type -60---450ºC
Operation form: automatic open or close
Flow characteristic: equal percentage, linearity
Leakage: single-base valve: 0.01* rating Kv,double-base valve, sleeve valve: 0.5%* rating Kv
3. Manual Wafer Butterfly Valve Images：
4.Manual Wafer Butterfly Valve Specification：
Size: DN50-DN1000
End flange: ANSI B 16.1,EN1092,AS2129
Face to face: ANSI B 16.10
Top flange: ISO 5211
Normal pressure: PN1.0/1.6MPa(150/200PSI)
Stem: 410/416/304/431/17-4PH/316/monel
Seat: NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White 5.FAQ
1. How about the Installation of the Wafer Style Butterfly Valve?
A: Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.
2. What is the working principle of manual wafer butterfly valve?
A: A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
- Q: Transformer butterfly valve and pressure relief valve difference
- The butterfly valve is usually fitted with an oil immersed transformer between the tank and the radiator to control the flow of oil between the transformer tank and the heat sink. When large power transformers are delivered, the radiators are usually individually packed to reduce transport sizes. The butterfly valve is closed to prevent the outside air or water from entering the transformer tank. When the transformer is transported to the installation site, the radiator is installed on the butterfly valve one by one. When the radiator is installed, the butterfly valve can be opened so that the oil flow between the transformer, the oil tank and the radiator can be circulated, so as to play the role of heat dissipation.When the transformer is running, it is found that when the radiator has seepage, the butterfly valve can be closed to avoid further leakage of transformer oil, and a new radiator can be replaced.
- Q: The difference between butterfly valve d71x_10s and d341s-10
- Before distinguishing between the two, you must first read the identification of the valve type:D stands for butterfly valves,3 means that the worm gear is connected and the drive does not indicate the handle7 and 4 indicate pipe to clamp connection, pipe flange connection, respectively1 means single eccentric, that is, the stem is not in the center of the butterfly plateThe former S indicates the material name of the valve body - plastic, X means sealing and the lining material is rubberThe latter S indicates the sealing lining material code ---- plastic, and the valve body is cast iron.10 means stress.
- Q: What's the difference between a clip type turbine butterfly valve and a flanged turbine butterfly valve?
- The clamp and flange are the two connections.The clip type is cheaper and the price is approximately 2/3 of the flange.The length of the clip type valve bolt is longer, and the requirement of construction accuracy is higher. If the flange on both sides is wrong, the bolt will be subjected to greater shearing force, and the valve will leak easily.
- Q: Water supply pipe gate valve and butterfly valve which good?
- 1. gate valve: also known as gate valve or gate, there is a valve in the valve flow direction perpendicular to the medium, adjust the height of the gate, you can adjust the flow of fluid. Valve advantages are small resistance, close tight, no water hammer phenomenon, widely used in a variety of liquid and gas shut-off valve. It also has some adjustment function, but when the part is opened, the gate is easy to be wetted by the fluid. When the fluid flows, it causes the shaking of the alarm board and the sealing surface is easy to wear. The drawback of the gate valve is that the structure is complex, the price is more expensive, it is difficult to repair, and the solid material is easy to deposit in the valve seat groove. Therefore, it is not suitable for the pipeline containing fiber or solid material in the fluid. Commonly used in the air, steam, oil medium pipeline, but also used as vent valve and low silk system valve.Gate valve is commonly used as one of the cut-off valve, mainly used to connect or cut off the medium in the pipeline, not applicable to regulating medium flow. Valve is suitable for pressure, temperature and caliber range, especially for medium and large diameter pipes.
- Q: I went online to check where was the pcv valve for a 2001 ford focus, but I didn't find it. Does anyone have a picture? Thanks
- Its on the front of a line that looks like a big black t and it is very hard to notice.
- Q: Butterfly valve D71X-10 and butterfly D371X-10 what is the difference?
- One is the turbine drive and the other is with the handle
- Q: Butterfly valve, two-way pressure and one-way pressure what is the difference?
- Popular, one point one pressure side, a double-sided pressure.
- Q: What's the difference between an electric two position control valve and an electric butterfly valve?
- With manual control device, once the power failure occurs, you can temporarily manually operated, and will not affect the use.The biggest difference is that the electric double bit butterfly valve can not fine adjustment; and the electric butterfly valve can play a regulating role.
- Q: What is the difference between the installation and function of a butterfly valve and butterfly valve?
- The principle of the valve gate valve is open and close cases, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface forming wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate. Valve closed, the sealing surface can only rely on medium pressure to seal, that is to rely on medium pressure to the gate sealing surface pressure to the other side of the seat to ensure the sealing surface seal, which is self sealing. Most of the valve is forced seal, that is, when the valve closes, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing. Gate valve with the stem along with a straight line of motion, called the lift rod gate valve is also known as the bar gate valve. Usually there is a trapezoidal thread on the lifter. The rotating motion is changed into a straight line through the nut at the top of the valve and the guide groove on the valve body. That is to say, the operating torque is changed into the operating thrust. When opening the valve, when the gate lift height is equal to 1:1 times of the valve path, the passage of the fluid is completely unblocked, but at run time, this position is unable to monitor. In actual use, the top of the stem is used as a sign, i.e., the open position, as its fully open position.Temperature changes appear to consider locking phenomenon, usually open to the vertex position, and then rewind 1/2 1 circle, as a fully open valve position.
- Q: i just finished installing a sprinkler line for my lawn and i used anti siphon valves and 4quot; sprinkler heads. it says in the manual that it has to be at least 6quot; from the highest sprinkler. i think i made a mistake. i installed it 7quot; from the highest 'sprinkler line' . will i have a problem with that regarding the operation of the anti siphon valves and the sprinkler system itself?
- If the antisyphon valve is not leaking maybe you should focus attention on the main valve ( assuming it is a solenoid valve) to see if it closes completely. Another thing, if the irrigation zone is on an incline then the water in the system will drain to the lowest point. Sometimes it drains slowly causing the impression of a leaky feed valve.
Send your message to us
Butterfly Valve Ductile Iron BS5155 On Sale High Quality
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
