Ductile Iron Butterfly Valve Made In China On Sale with Top quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Manual Wafer Butterfly Valve Description：
A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
2.Main Features of the Manual Wafer Butterfly Valve
a)Cast hole. Flange connection meet ANSI 125/150# DIN PN10/16 BS4504 PN10/16 in the meanwhile.
b)Soft seat. Replaceable. Increase of service life.
c)Double half shaft without pin.
d) Square and short neck. Easy to stick scutcheon and cost saving.
3. Manual Wafer Butterfly Valve Images：
4.Manual Wafer Butterfly Valve Specification：
1)Size: DN40-DN1400
2)Material:body-CI/DI/WCB/SS
disc:DI/CF8/CF8M/C95400
3)Professional Maufacturer for more than 10 years
PRESENTATION:
1) Sizes:
DN40mm-DN1400mm
2) Materials:
a) Body: CI(cast iron ,GG25 )/ DI (ductile iron ,GGG40)
b) Disc: DI / CF8 / CF8M / C95400
c) Seat: EPDM / NBR / TEFLON / VITON
5.FAQ
1. What is manual wafer butterfly valve?
A: Wafer style is the more common of the two and is less expensive than the lug style. The wafer style butterfly valve is just about the standard. It ís so common that no one even bothers to use the word "wafer" when ordering a butterfly valve. It is taken for granted that if a butterfly valve is ordered, a wafer style will be received.
2. How about the Installation of the Wafer Style Butterfly Valve?
A: Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.
3. What is the working principle of manual wafer butterfly valve?
A: A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
- Q: What are the definitions of internal, external and leakage valves?
- The leakage within the valve that is the reason of erosion wear medium makes the valve is not closed tightly, even if the valve screw (stem) screwed in place, because there is still a gap between the spool and the valve body, the medium can flow past.
- Q: Where is the hydrant main valve?
- There is a gate valve at the elbow below the hydrant
- Q: The difference between fire general valve and fire fighting special valve
- Fire fighting valves are mainly signal valves and alarm valves and water indicators, etc., other gate valves, butterfly valves, pressure relief valves and filters are common valves.
- Q: and today the boss told me that I would like to do a valve of the commodity inspection information, and nothing else to me, which master taught meI am a professional intern, our company is doing the valve outlet, today my boss asked me to do a valve inspection data, what other data are not for me, which foreign trade master teach me ah, depressed ah ah ah???
- First of all, you have to check the HS encoding of your product.The corresponding HS code will have a regulatory condition followed by different regulatory conditions that mean different procedures (or certificates), such as what you call "B".What aspects must be examined in commodity inspection?Different products to implement different inspection and quarantine methods, the general is to do a customs clearance on the OK. The products you mentioned above may not need to do customs clearance (see what kind of valve you are, so you'd better check the conditions again)Is commodity inspection agent or business enterprise? Do you need to check every export?Generally not many agents are on the line, and if the HS regulatory conditions have to do customs clearance, then each time to do.Is there any standard or basis for inspection? Where can I find out the knowledge in this area?
- Q: How to quickly identify the types of valves?
- There are many kinds of valves, such as butterfly valve, ball valve, globe valve, gate valve, check valve, plug valve, plunger valve and diaphragm valve...... Pneumatic, electric, worm, or handle......There are also pictures on the Internet, you can search their respective pictures, shape is visible
- Q: What valve is the FCV?
- FCV is the control valve, you can adjust the valve opening according to the required flow.1, also known as the valve control valve, in the field of industrial automation and process control by adjusting the control unit outputs the control signal, the final control element with the power to change the media flow, pressure, temperature, level and other parameters. Generally composed of actuators and valves.2, according to the characteristics of the trip, the control valve can be divided into straight stroke and angular stroke. According to the power used by the executing agency, according to its function and characteristics are divided into linear characteristics, such as percentage characteristics and parabolic characteristics of the three. Control valve applies to air, water, steam, a variety of corrosive media, mud, oil and other media.
- Q: The valve has a clear opening and closing sign. What does this sentence mean?
- In the hand wheel or valve placed on the signs, the contents of the device name, switch direction and so on.
- Q: What are the types of valves?
- 1.2.1 sort by pressurex09 (1) vacuum valve operating pressure below standard atmospheric pressure valvex09 (2) low pressure valve nominal pressure PN is less than or equal to 1.6 MPa valve.x09 (3) medium pressure valve nominal pressure PN, 2.5, 4, 6.4 MPa valvex09 (4) high pressure valve nominal pressure PN 10.0~80.0 MPa valvex09 (5) high pressure valve nominal pressure PN = 100 MPa valve.1.2.2 classification by dielectric temperaturex09 (1) high temperature valve for medium working temperature T > 450 degrees of the valvex09 (2) medium temperature valve for medium temperature 120 degrees valvex09 (3) at room temperature valve for medium temperature -40 = t = 120 DEG C of the valve.x09 (4) low temperature valve for medium temperature -100 = t = -40 C of the valve.x09 (5) ultra low temperature valve for medium working temperature T < -100 DEG C valve
- Q: What is the flow medium of the valve?
- What is the valve. If the water through the valve, the medium is water. I hope I can help you.
- Q: How can the material be checked by valve approach? What experiments do you need?
- (8) the throttle valve does not test the tightness of the closing parts, but the strength test and the tightness test of the stuffing and the gasket shall be carried out.(9) the pressure test, the valve closing force only allows a person's normal physical strength to close; not augmented with tools like leverage (except torque wrench), when the hand wheel diameter is greater than the wait at 320mm, allowing two common off.(10) with a sealed valve, should be taken out of packing for sealing test, sealed after the official closed, check whether leakage. When gas is used as a test, check the water in the stuffing box. When sealing test is carried out, the upper seal is not allowed to be in the tight position.(11) when the valve with drive device is tested and its tightness is tested, the sealing test shall be carried out by using the driving device to close the valve. For manual drive units, seal test shall also be done with the actuating closing valve.(12) the by-pass valve installed on the main valve after the strength test and the sealing test. The strength and tightness test of the main valve is carried out. The main valve should be opened when the closing member is opened.(13) iron valve strength test, the application of Pratia tapping valve and valve cover, check whether there is any leakage.(14) the valve test, in addition to the provisions of the plug valve to allow sealing surface oiling, other valves are not allowed in the sealing surface of the oil test.(15) when the valve pressure test, the blind plate on the valve pressure should not be too large, so as to avoid deformation of the valve, affecting the test results (cast iron valve if pressed too tight, will be damaged).(16) after the valve test pressure, should promptly remove the water and clean the valve, should also be prepared for the test record.
Send your message to us
Ductile Iron Butterfly Valve Made In China On Sale with Top quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
