G Series Mono Screw Pump
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Performance Range:
Maximum pressure:Single stage 0.6MPa
Two stage 1.2MPa
Three stage 1.8MPa
Four stage 2.4MPa
Maximum capacity: 300 m3/h
Maximum temperature: 150°C
Maximum viscosity: 2.7*10^5cst
Feature:
Low Mechanical Vibration,No pulsation,Quiet operation,High suction ability
Could pumping liquid mixed fibre & solid grain,high viscosity liquid or mixed air liquid.
1. Good self-priming performance
2. Stable flow and minimum pulse shear
3. Wide range in viscosity of conveying medium, even the non-artesian medium. Non sensitive to the liquid
impurity.
4. Simple structure, high efficiency in operation: long service life, small abrasion,convenient main tenance and
replacing of rotatable parts
5. Operating and flow directions are reversible: multiple mounting forms
6. High utility ratio not easy to trouble.
Conveying Medium:
1. Neutral or corrosive liquid
2. Clean or wearable liquid
3. Non-current viscous liquid
4. Liquid with fiber and high solid content
5. Liquid with gas easy to produce bubble
Application:
Food industry: Pumping food liuqid,wine,waste liquid or additive liquid
Textile mill: Pumping fible liquid,dyestuff,printing ink,nylon powder liquid
Paper industry: Pumping back liquor
Petro industry: Pumping oil,grease
Chemical industry: Pumping suspend liquid,emulsion,soda & salt liquid
Shipbuilding: Pumping residue oil,sewage or seawater
Building industry: Pumping slurry,Cement
Nuclear industry: Pump rediocative liquid
Metallurgical & Mine: Pumping oxide or waste water,drain off water,liquid explosive
Watertreament: Pumping slurry,sludge,additive liquid
Power plant: Pumping coal slurry
- Q:What are the general water pump failure, how to repair?
- Two, pump speed is low(1) human factors. Some users because of original motor damage, may be accompanied by another motor, resulting in a flow of small, low head or even the consequences of Sheung shui.(2) the mechanical failure of the pump itself. Impeller and pump shaft fastening nut loose or deformation of the pump shaft bending, resulting in multi impeller, directly with the pump body friction, or bearing damage, are likely to reduce the pump speed.(3) the maintenance of the power machine is not working. The motor is lost because of winding burn, the change of winding number, wire diameter, wiring method, or failure in maintenance can not change the pump speed.
- Q:What does the pump mortar do?
- Concrete pump before the need to transport water and pump pump material, dredge pipeline. In accordance with the technical specification for concrete pumping construction (JGJ/T10 - 1995), pumping concrete, pump mortar generally use cement slurry
- Q:I live on the 8 floor. Often there is no water. Life is very inconvenient. What kind of pump do I have to install? What should I pay attention to when I buy it? What's the pump for that brand? Should it be installed in that position?
- (8) check the suitability of the foundation and whether the size of the foundation corresponds to the size of the pump.(9) find the position of positive pump and motor, pump set and anchor bolt and the inlet and outlet flanges, to ensure that the flange torque of the pump conforms to the standard. Check the inlet and outlet piping before alignment. Make sure the weight of the inlet and outlet pipe does not exert force or torque on the pump. When looking for, should also pay attention to eliminate the pump rotor movement, so as to avoid the end gap error. If checked after the pump is working, it should be carried out under cold condition. It is important to draw attention to the fact that the pump set of the complete set of factory is only rough looking (checked with a ruler) when it is shipped. It may cause displacement when it is transported.
- Q:Why can't the inlet of centrifugal pump be negative pressure?
- The entrance can be a negative pressure. You can often see someone pumping water from the pool. How can you pump water if it is not negative pressure?
- Q:What are the failures and causes of the replacement of the fuel pump assembly?
- Failure cause:1) the gasoline pump is too thick with the gasket at the junction of the axle box.2) pump film rupture or pump film and pump shell combination of sealing is not strict.3) the oil inlet valve is stuck or sealed badly.4) severe wear of the rocker arm, reducing the pump film stroke.5) the pipeline from the gasoline tank to the gasoline pump is not smooth, or the pump film spring passes.
- Q:Is the vacuum pump air compressor?
- No, both work in the opposite way. Air compressor, referred to as an air compressor, is a machine that produces compressed air (positive pressure). The vacuum pump is just the opposite.
- Q:What is the main difference between SK water ring vacuum pump and 2BV water ring vacuum pump?
- SK vacuum pump is a single-stage water ring vacuum pump, vacuum pump and motor separation, coupled with couplings, vacuum relatively low.
- Q:Why can the centrifugal pump hold down the pressure?
- Centrifugal pumps are vertical, horizontal, single-stage, multi-stage, single suction, double suction, self suction and other forms. Vertical centrifugal pump is referred to as submerged pump, molten salt pump and submerged pump. Centrifugal pumps use the impeller to rotate and cause centrifugal motion of the water to work.
- Q:Do you have a suction pump higher than 9 meters?
- Since the atmospheric pressure has been basically determined, the theoretical suction degree of the pump is more than 10 meters.
- Q:What is the difference between an air pump and a water pump?
- A pump is a machine that transports liquids or pumps liquids. It will be the prime mover of the mechanical energy or other external energy transfer to the liquid, the liquid energy increase, mainly used to transport liquids including water, oil, alkali liquid, emulsion, suspension emulsion and liquid metal, but also transport liquid, gas mixtures and liquids containing suspended solids.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
G Series Mono Screw Pump
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
