Q:what is the requirements of roofing insulation materials fire rating?

The fireproofing requirements of architectural design are regulated by architectural design fire?safety?rules, roofing insulation material only has the requirements of materials combustion performance, namely non-combustible material. No fire rating requirements.

Q:What are the fireproofing materials of the external wall included?

According to the external wall thermal insulation materials, the external insulation materials is in general divided into Class A and Class B. The A class is non-combustible material. The B class is combustible materials. The fire disasters of the CCTV building and Shenyang hotel are both caused by the B level materials. Generally, the A level material will be used, and some prices are even cheaper than the B-grade material. A level is roughly divided into thermal?mortar, phenolic foam Board, rock wool board, foam cement board, and so on. I hope my answer will help you!

Q:What kind of refractories do the anode baking furnace use?

Usually the clay refractory bricks will be able to meet the requirements

Q:Can quantitative feeder be used in refractory plant? Thank you

Yes, but the material must be no longer using a simple Q235 material

Q:How to classify fire resistance rating of brick-concrete structure?

In order to ensure the safety of the building, the fire protection measures must be taken to make it have a certain degree of fire resistance, even if there is a fire, it will not cause too much damage. According to the national conditions of our country, and in the light of other countries standards, < high-rise civil building fire protection design specification > defines fireproof rank of high-rise civil buildings into level one and two; < code for fire protection design of buildings > divides the rank into level one, two, three, four, level one is the highest level, level four is the lowest. Besides that the minimum fire resistance of the building component is specified, buildings of fire resistance rating also specified requirements for combustion performance. Because the component with the same fire resistance limit is different, it is different in the fire.According to our country national standard < building design fire protection code >, the fire resistance rating of the building is divided into four levels. The fire resistance of a building is determined by the combustion performance and fire resistance of building components (such as beams, columns, floors, walls, etc.). Generally speaking, the fire resistance building of level one is a mixed structure of reinforced concrete structure or a mixture of brick wall and steel concrete structure; the fire resistance building of level two is a mixed structure of steel truss structure, reinforced concrete column and brick wall; the fire resistance building of level three is brick-wood structure made of wood roof and brick wall; the fire resistance building of level four is combustible structure which is composed of wood roof and non-combustible wall.

Q:How to understand qualitative and qualitative refractory materials?

Such as amorphous refractory castable, referred to as bulk loading, cast material, ramming material, refractory clay etc., utensils and other special products. Amorphous refractory material products, refractory heat insulating bricks and experimental and industrial crucible, spraying materials, such as burning bricks, electric melting brick, turn it into required shape and process heat treatment in where it is used.

Q:How many fire endurance grades are the AAA fire resisting shutter divided?

The fire shutter is divided into A / B / C classes. The refractory limits are not less than 1.2 /0.9 /0.6 hours. References to "general technical specification for steel fire resistance rolling shutter door GB 14102-93". 4.3 4.3.1 Classification according to fire resistance time. The common steel fire resisting shutter(see Table 3) The categories of the codes of the refractory time hF1 1.5F2 2.04.3.2 composite steel fire shutter composite steel fire shutter(see Table 4). Table 4 and Category Code refractory time hF3 2.5F4 3.04.4 refractory press time, smoke performance classification 4.4.1 ordinary steel fire anti-cigarette curtain (see Table 5) Table 5 and category code leak smoke refractory time h (20Pa pressure) FY1 1.5 ≤0.2m3 / m minFY2 2.0 ≤0.2m3 / m min4.4.2 composite steel fire anti-cigarette curtain (see table 6) table 6 and category code leak smoke refractory time h (20Pa pressure) FY3 2.5 ≤0.2m3 / m minFY4 3.0 ≤0.2m3 / m min excerpt complete fire shutter when the fire district for fire resistance of 3 hours, the opening portion on the firewall setting fire shutter fire resistance of 1.2 hours. **** Fire resistance of 3.0 hours called premium (fire back surface). "Construction Regulation" is mentioned in setting up a firewall and used as the separation of the fire resisting shutter and the fire?compartments. When taking the fire back surface temperature rise as the fire resistance standard of the fire resisting shutter, the fire endurance should not be less than 3.00h; When taking the fire back surface temperature rise as the fire resistance standard of the fire resisting shutter, the two sides of the roll should have protection of ?closed automatic water spray system, and the duration of water spray system should not less than 3.00h. In summary: The fire resisting shutter can be divided into: Grade, A, B and C looking to adopt

Q:Who knows the classifications of magnesia refractory?

They can be devided into two major categories of fettling magnesite grain and magnesite products. They can be divided into fettling magnesite grain, magnesia?brick, magnesia-silica brick, magnesia-alumina brick, magnesium-calcium brick, magnesia-carbon brick and other varieties according to the chemical compositions and purposes Its performance is greatly affected by CaO / SiO2 ratio and impurities. The load softening point and thermal shock resistance of high purity magnesia brick are much higher than those of the general magnesia bricks. It has high refractoriness and good resistance for alkaline slag and iron slag, which is an important kind of advanced refractory material. Magnesia products are mainly produced by sintering, and sintering temperature is generally between 1500 ~ 1800 ℃. Besides, chemical binder can be added to make unburned?bricks and unshaped refractories. Mainly used in open hearth furnace, electric furnace, oxidation converter, non-ferrous metal metallurgy furnace, cement kiln and calcining kiln for basic refractory.

Q:What are the differences and connections between softening temperature of the refractory under a fixed load and thermal resistant creep property of the refractory?

The result of refractoriness under load is temperature while the result of creep is percentage of deformation. Refractoriness under load and creep can be tested by an instrument. Refractoriness under load reflects the temperature in which the deformation reaches a certain degree under the condition of load. Creep reflects the deformation refractory has under the condition of constant temperature and load. Both refractoriness under load and creep are important criterion for the operating temperature of refractory.

Q:Is the ball mill used in production of refractories?

It depends on what refractory you produce.