Q:What's the maximum temperature that the refractory ceramic fiber cloth can endure?

It depends on the composition of the ceramic material. If its composition is alumina and it is used by civilians, its normal use temperature is 1200℃; if its composition is alumina but it is for millitary use, it can endure the highest temperature of 2200℃.

Q:What refractories are resistant to fluorine gas?

It is recommended to use fused-quartz brick, which will produce hydrofluoric acid fluorine (an acidic gas) when water vapors. It is cheap. While it is recommended to use silica?brick if it exceeds 1,200 degrees. So acidic refractory is an advisable refractory for using. It works well if the temperature is below 1200 degrees.

Q:How many types of special refractories are there?

Metal ceramics, high temperature coatings, high temperature fiber and other reinforced materials

Q:Is there vermiculite in refractory?

Paint, small thermal conductivity, chemical, shipbuilding and other industries. Expanded vermiculite has excellent electrical?insulating?property, and it is stratified structure. It is a good thermal insulation material used in growing seedings, flowers and trees, bulidings, rubber and smelting. I hope my answer will make you satisfied. Refractory contains crystal water and board between its layers. For example, the interlayer of fireproof door contains expanded vermiculite, and after expansion, its specific gravity is 60-180kg& # 47. Electric insulation material. Expanded vermiculite is widely used for thermal?insulation?material and sealing material. Of course, some refractory also uses vermiculite; fireproofing material. Vermiculite is a good refractory material, whose maximum using temperature and unit weight can be repsectively up to 1,100 ℃ and 50-200kg/m3. When it is expanded, it is called expanded vermiculite. It is highly thermal insulated. Hard water softeners and paint. After unripe flake vermiculite is roasted in high temperature, its volume will expand 6- 20 times quickly. Friction materials, its volume can be quickly expanded several times to dozens of times. In addition. Quality expanded vermiculite

Q:How to divide the fire resistant level of construction thermal insulation materials?

How to divide the fire resistant level of construction thermal insulation materials: Combining three versions of GB8624 (1997,2006,2011) external wall thermal insulation fire?rating can be basically divided into: A1, A2, B1, B2, B3 and other levels. There are many technical indexes for specific division, very professional and technical, so it is hard to say clear now. For details, please contact Qingdao Shanfang Instrument Company who is specialized in fire?rating tester for external wall thermal insulation materials.

Q:Graphite and other carbon materials may be oxidized to CO or CO2 at high temperatures. But why can they be refractories?

There is no contradiction for this. Any substance can be combustible, but different materials have different ignition points.There are many types of graphite. Pyrolytic graphite has a much lower ignition point. Therefore, as long as it reaches at a certain temperature, it can convert into graphite. Mostly, in practical applications (such as brake pads will add a certain amount of graphite), graphite is required to have refractoriness of below 1000 ℃. Graphite can serves as both the combustible and refractory material. So, it can be used as a fire-resistant and high-temperature-resisrant material because graphite (lamellar graphite) has a ignition point of at least 3000 degrees in an oxygen free condition. The above information is for reference only and is offered by Xin Ruida Graphite Company.

Q:What's the material of fireproof and wear-resisting floor?

1. It is the kind of special concrete floor, and its production process is the same with that of the common concrete floor, but it uses different material which needs to be the pebbles and sand after processing with marbles and dolomite. 2. Fireproof floor is a kind of decorative material which is laid on the ground of the factory or large areas of floors. It does not support combustion or it is composed of flame retardant materials. Fireproof floor has two categories. One is composed of aggregate wear-resistant material which is solid particulate matter. Its construction method is to evenly spread aggregate wear-resistant particles on the surface layer of the concrete when the floor is just pouring concrete and solidified, and then a firm flame retardant layer will be formed on the surface layer. This is the the so-called carborundum wear-resisting floor. But this kind of material has many limitations and can only be used on the surface of the just poured concrete. In addition, it is easy to fade in color and not beautiful in appearance. So this is not fireproof floor in the strict sense. Here we focus on a new liquid coating fire protection floor, which is environment friendly, widely used and beautiful in appearance. 3. Wear-resistant floor has the characteristics of pressure resistance, strong wear resistance,oil resistance, and anti-infiltration. It is also dust-free and easy to clean. After entering the initial setting of concrete, construction can be started immediately. Construction period is usually longer, but better using effect will arise.

Q:What's the texture of refractory for the hearth of reverberatory?furnace? ?

The long-term usage temperature of ceramic fiber is between 950-1260 degrees.

Q:What are the materials of insulation firebricks?

The raw materials of firebricks, firebricks have various raw materials, and the composition of which can be divided into six categories: soil, stone, sand, mineral, powder and others. One of the raw materials, soil: bauxite, kaoline, clay, diatomite Another raw material, stone: fluorite, kyanite, andalusite, forsterite, vermiculite, mullite, pyrophyllite, chlorite, dolomite, sillimanite, magnesia-alumina spinel, and silica Another raw material, sand: clay sand, zircon sand, quartz sand, and magnesite Another raw materials, mineral: chromium mineral Another raw material, powder: aluminum powder, micro-silica powder, and silicon powder Another raw materials, others: asphalt, graphite, phenolic resin, perlite, cenosphere, sialon, corundum, silicon sulfate, silicon carbide, sodium silicate, silica sol, boron carbide, calcium aluminate cement, nitride material, haydite, aluminum oxide, alumina sol and zirconia, etc.

Q:What are the refractory stocks?

The company produces energy saving, environmental protection type functional refractory materials and unshaped refractory materials. It is the main functional refractory material and unshaped refractory production enterprise in china. Company's products to new green high-quality refractory materials, energy saving and environmental protection as the leading iron and steel industry technological progress and improve the level of technology and equipment to adapt to meet the "development policy" refractories industry to develop industry, has a strong competitive advantage in the market. The main domestic refractory products company can only use part of the products of refractory materials production of iron and steel industry, iron and steel industry production and Pu resistant can be used in the vast majority of refractory products, iron and steel industry with the most complete refractory products. Therefore, the future development of the company is closely related to the prosperity of the iron and steel industry. More than more than 2000 enterprises in refractory industry, the company is the largest supplier of refractory materials in China, and the market share is less than 2%. Iron and steel group integration will inevitably lead to the overall contract cost control, supplier refractory decreases by seventy or eighty to two or three. The company's overall contract accounted for 37% (Montreal 68%), the overall contract increase will enhance the market share and profitability. China's urbanization, industrialization and investment in the 4 trillion infrastructure will stimulate sustained and rapid growth of China's steel demand. Therefore, in the long run, the prospects for the development of refractories for iron and steel are broad.