Black Annealed Wire Binding Wire Tie Wire for Construction and Building
- Ref Price:
-
$350.00 - 450.00
/ m.t.
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Black Annealed Wire Binding Wire Tie Wire for Construction and Building Description：
Black Annealed Iron Wire is very good for Chain link fence, fencing mesh, gabion mesh box production and for construction business as tire wire, binding wire and galvanized wire raw material production.Our wire is of good quality and nice price.
Black Annealed Wire is mainly processed into coil wire, spool wire or big package wire. Annealed wire is used as tie wire or baling wire in building, parks and daily binding. Besides, black annealed wire is mainly used as industrial wire, construction wire, industrial bale tie wire and constructional tie wire, etc.
2.Main Features of Black Annealed Wire Binding Wire Tie Wire for Construction and Building ：
• Durable
• Practical
• Versatile
• Use widely
• Inexpensive
• High Quality & Reasonable Price
Black Annealed Wire Binding Wire Tie Wire for Construction and Building
3. Black Annealed Wire Binding Wire Tie Wire for Construction and Building Images
4.Black Annealed Wire Binding Wire Tie Wire for Construction and Building Specification
Wire Gauge | SWG(mm) | BWG(mm) | Metric(mm) |
8 | 4.05 | 4.19 | 4.00 |
9 | 3.66 | 3.76 | 4.00 |
10 | 3.25 | 3.40 | 3.50 |
11 | 2.95 | 3.05 | 3.00 |
12 | 2.64 | 2.77 | 2.80 |
13 | 2.34 | 2.41 | 2.50 |
14 | 2.03 | 2.11 | 2.50 |
15 | 1.83 | 1.83 | 1.80 |
16 | 1.63 | 1.65 | 1.65 |
17 | 1.42 | 1.47 | 1.40 |
18 | 1.22 | 1.25 | 1.20 |
19 | 1.02 | 1.07 | 1.00 |
20 | 0.91 | 0.84 | 0.90 |
21 | 0.81 | 0.81 | 0.80 |
22 | 0.71 | 0.71 | 0.70 |
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your Black Annealed Wire Binding Wire Tie Wire for Construction and Building ？
We are producing steel wire trading for more than ten years. We are specialized in export of various kinds of steel wire and wire mesh products, like Black Annealed Wire Binding Wire Tie Wire for Construction and Building. we offer high quality steel wire; hot dipped wire; electro galvanized wire; fencing , steel wire rope, steel wire strand, cable wire; wire mesh and other wire related products of good qualtiy and nice price.
②what is the advantage of our Black Annealed Wire Binding Wire Tie Wire for Construction and Building ?
1. Durable service life and competitive price.
2. High quality and low price.
3. With good anti-corrosive
4. Beautiful, strong and not expensive.
③How long can we receive the product after purchase?
In the purchase of Black Annealed Iron Wire within three working days, We will arrange the factory delivery as soon as possible. The pacific time of receiving is related to the state and position of customers. Commonly 15 to 20 working days can be served.
- Q: my speaker makes a fuzzy or static noise while the scene has high or low sound. I cut my wire in half because I bought a subwoofer and we didn't get the wires with it. So I cut it. After all I didn't need the wire for the subwoofer. Could my speakers make such noises because of cutting a wire?
- Shortening your speaker wire will not cause this problem. In fact, shortening your speaker wires should give you less static since there is less resistance. Most than likely, it's not your speakers causing the static sound, but your amplifier or receiver. You may be looking for a new one soon.
- Q: wiring has ceramic poles
- You need to replace the wiring. Be care-full, if the old wiring has insulation on it, it most likely is asbestos.
- Q: I purchased a wiring harness to install an aftermarket receiver in my 2000 Chevy Cavalier, also. I have lost the insert that came with the harness and as such I am at a loss as to how to wire my receiver to the harness.help
- 2000 Chevrolet Cavalier Car Stereo Radio Wiring Diagram Car Radio Constant 12v+ Wire: Orange Car Radio Switched 12v+ Wire: Ignition Switch (The radio harness does not provide a switched power source. Run a wire from the Ignition Switch.) Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger: Pink Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Front Speakers Size: N/A Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Rear Speakers Size: N/A Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
- Q: I have 12/3 wire running from the breaker box on a 20 amp breaker that powers a bathroom (2 lights and 2 receptacles). I want to splice into this and run 14/2 wire into the living room to run 6 recessed lights. Is this OK to do?
- No, that is against code. Splicing is not allowed nor can you use a lesser gauge on a circuit. To clarify: splicing exposes otherwise insulated wire. The splice has to be done properly such that no wire is exposed, the splice is hardened and this is achieved using a junction box of NEMA appropriate to the installation conditions. A 20A circuit for a bathroom means there is an exhaust fan since a couple of lamps and receptacles do not normally call for that much. That means the circuit has to be able to support 20A and that means the entire circuit. If you extend the circuit using lesser gauge wire than you downgrade the circuit's ability to handle current. This is a fire risk and is a strict no-no.
- Q: Coming from my ceiling I have a black, a grey, 2 white, 2 bare and a red wire. Coming from my ceiling fan/light fixture is a green, black, black with a white stripe and a white wire. How exactly would I go about wiring this? It is a two switch setup without a remote.Thank you in advance.
- You have too many wires coming from the ceiling, as it could have done (for separate fan and light control) with a black, red, white, and ground (like 14/3 w/ground romex). Someone apparently added a second run of wire up there. Up at the fan, determine which wire on the fan runs the motor, likely a black fan wire, and which powers the lights (likely a blue fan wire). Connect each to its own switch, preferably using the black you have for the fan, and say the red for the lights, tie the whites together, and the bare together. And the grey just gets ignored. This is gonna be good...
- Q: How do current carrying wires produce magnetism... Explain, give sites and clarify.
- i'm uncertain we've a sparkling theoretical answer to this in spite of the incontrovertible fact that it relatively is a demonstrable actuality that shifting expenses have an result on different shifting or movable expenses.even while there is not any internet fee glaring it relatively is summarized as magnetism
- Q: I am trying to replace a GFCI outlet, there are 6 wires -3 White, 2 Black Ground. I have tried to wire it several times and indicator light comes on but it doesn't trip or work when something is plugged in. It's in a box with 2 light switches and I believe feeds down to another switch plug because they are currently not working. As well as my microwave which is on the same circuit. So long story short how do I wire this thing?
- You need to find which set of wires is the feed 1st. Turn off breaker for that circuit disconnect wires . Then turn breaker back on . Which black wire is hot ? Remember which black wire has power. Then shut off breaker again . The black wire that is hot gets connected to your line voltage connection side ( Gold screw on outlet ) the white wire goes to the other line voltage side ( Silver screw ) . The other black and white wire gets connected to the load side of the GFI . If the screws are all the same color for some reason . Remember the longer slot is always the neutral or white wire . The smaller slot is the black or hot wire . Ground to the green screw .Turn breaker back on and test .
- Q: Ok. so i wired my cd deck into my 92 buick, but everytime i start the car i have to manually turn on the cd deck. i also have to change the settings everytime! and once i turn off the car the setting will not save and the setting will be lost. Now everytime i turn my car on i have to manually put the settings again! this did not happen in my old car! and i think it might be the wiring! Because the last cd deck i had did save the settings! and would turn thge cd player on everytime i turned on my car!! and it would play the track back, right where i left off. please help! i did attach the yellow cable wire the red cable to the battery current.? is there a problem!
- sparky is right. The yellow wire keeps the memory, and should have constant power even when the ignition is off. The red wire should have power only when the ignition is on. If the radio is left on when you turn the car off, it will come back on when you start the car, but only if the radio keeps constant power on the yellow wire. For your car: The constant power wire should be orange (connect to radio's yellow wire) The switched power wire should be yellow (connect to radio's red wire)
- Q: I got molds done a while back for my finishing wires on my braces. I'm getting them Tuesday, but I'm not really sure what the difference is between finishing wires and the wires I have now. So I'd be delighted if someone could explain:) Also, after you get finishing wires, about how much longer is it until you get your braces off? And, would you recommend the wire retainers, or the clear ones? Why? Thanks in advance!
- Finishing wires are for the final stage of braces. They are pretty strong wires that snap tightly into your brackets so the orthodontist can finely control the teeth and line everything up nicely. I can't say how long until you get your braces off...that's kind of a case by case basis. Typically the wire retainers are better than the clear ones from a hygiene perspective. They can also be adjusted unlike the plastic ones.
- Q: have a kenmore dryer with 3 wires now had it will not dry need info on wiring it so it will dry
- Here is a picture of the wiring for a 3 wire cord. If this doesn't solve the problem, you may have issues with the receptacle. Just out of curiosity, have you checked the vent hose? If it's clogged with lint, the dryer won't be able to breathe, and therefore won't dry. Good luck.
Send your message to us
Black Annealed Wire Binding Wire Tie Wire for Construction and Building
- Ref Price:
-
$350.00 - 450.00
/ m.t.
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
