Bearings double row tapered roller 352132
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
- Double row tapered roller bearings
Double row tapered roller bearings can only bear radial load at the same time it can be
subject to bi-directional load. It can be in bearing axial clearance range limit shaft or shell
two-way axial movement.
★Product features
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the
raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. The rollers are guided by a
flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum. The larger the half angles of these
cones the larger the axial force that the bearing can sustain.
★Product application
In many applications tapered roller bearings are used in back-to-back pairs so that axial
forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in:
- car and vehicle wheel
- mining equipment
- moderate speed
- engine motors
- axle systems
- construction
- agriculture
- reducers
- gear box
★Horton tapered roller bearings Basic size
- Single row tapered roller bearings:
Inner ring size: 20mm ~ 1270mm Outer ring size: 40mm ~ 1460mm Width size: 15mm ~ 240mm
- Double row tapered roller bearings:
Inner ring size: 38mm ~ 1560mm Outer ring size: 70mm ~ 1800mm Width size: 50mm ~ 460mm
- Four row tapered roller bearings:
Inner ring size: 130mm ~ 1600mm Outer ring size: 200mm ~ 2000mm Width size: 510mm ~ 1150mm
★Tolerance:
Horton tapered roller bearing with common
tolerance, and also provides P6X, P6, P5, P4,
★Radial clearance
Horton single row tapered roller bearings only
in after installation have clearance, and in
★Cage
Tapered roller bearing general ues the steel plate stamping, basket shape cage, but when the size is bigger, we
also adopts entity cage.
1. Outside diameter D ≤ 650mm, use the steel plate stamping cage, cage postposition without code mark.
2. Outside diameter D > 650 mm, use the steel entity prop cage, cage postposition without code mark.
★Dynamic equivalent load
P = Fr [KN], Fa / Fr ≤ e;
P = 0.4Fr + YFa [KN], Fa / Fr > e.
The single row tapered roller bearings used in pairs (basic physical size can be different), when calculation the
equivalent dynamic load of the bearing, must be included in the radial load cause additional axial force. The single
row tapered roller bearing additional axial force S, can approximate formula: S = Fr / 2y
★Static equivalent load
Single row tapered roller bearings
P0 = 0.5Fr + Y0Fa [KN] P0 < Fr, then P0 = Fr
Double row tapered roller bearings
P = 0Fr + Y1Fa [KN],Fa/Fre ≤ｅ P = 0.67Fr + Y2Fa [KN], Fa/Fre > e
- Q: Taper roller bearings are used on my motor. Serious damage occurred during use. Please help me analyze the possible causes of damage! Thank you
- To LZ: 1 it is recommended that the radial force and the rated load of the bearing be compared to determine whether the radial force is too large (if there is axial force, it needs to be synthesized as equivalent load, and then compare.) In 2 section, you basically is the middle of the two row tapered bearing ring and then as a double row tapered to use (not in general, so natural clearance installed back to back) without gasket or nut to adjust, this is a very good idea.
- Q: Is the tapered roller bearing so correct?
- Tapered roller bearings are designed for the inner ring, outer ring raceway and roller cone vertex on the central axis of the bearing, radial load acting on the bearing, axial force is generated. Therefore, it is necessary to use the 2 bearings for use, or as double pairs of bearings, double row bearings. Combination and double row tapered roller bearings, when radial loads act on tapered roller bearings
- Q: How does the roller of tapered roller bearings fit in?
- Tapered roller bearings itself can be broken down, and new (or old) bearings are cleaned and decomposed. So do not worry, carefully installed in accordance with the original installation order on the line, and if it does not meet the installation order, the installation of this bearing is not go on.
- Q: What items should be inspected for tapered bearings?
- 4, tapered roller bearing ring after the whole machine after pickling, there should be no scald, the name of cooperation should not be a pickling visible traces of burns, and no response angle detection.Tapered roller bearing appearance should be smooth, lubrication, no plants, no scratches, no rust and no obviously difference, promised to pressure injury, damage, deformation and defects such as trachoma vipassana.
- Q: Tapered roller bearings. Are the rollers tapered?
- The cone can be seen as a right angled triangle revolving around a right angle, with a point at the top.
- Q: Can tapered roller bearings be installed in a vertical direction? In a vertical direction rather than in a horizontal direction..
- Whether horizontal mounting or vertical installation, the axial direction is axial and radial is radial
- Q: What does "tapered roller bearing" suffix "A" mean?
- Tapered roller bearing suffix AA - angular contact ball bearings with a contact angle of 30 degreesA5 - angular contact ball bearings with a contact angle of 25 degrees
- Q: The device is a vertical axis vertically arranged in the bearing chamber, the upper shaft without suspension, supported by bearings, shaft bearings are installed at the bottom of the outdoor rotating parts weighing 50 kg, the two ends of the shaft are used in single row tapered roller bearings, the bearings between the length of 30 meters. The rotation speed of the shaft is 480r/min. The device is suspended on a rotating turntable and is subjected to centrifugal force during operation...
- Why not such a large selection of axial thrust bearing, if the radial force selected contact angle greater than 45 degrees (thrust) tapered roller bearings or spherical roller bearings are good, ordinary radial cone bearing axial force mainly depends on the inner ring rib, movement and rib roller end surface contact of gyro rotation, life too effect of axial force, and excessive axial force will make rib fracture.
- Q: Tapered roller bearings, 70 in diameter, please tell me the model number
- What about outside diameter (D) and width (B)? You didn't say?.Following are all series of codes and sizes for tapered roller bearings (single column and double row). I hope they can help.Single row tapered roller bearings (taken from GB/T 297-1994)Bearing code |30000: 32914 X2Basic size /mm|d: 70Basic dimensions /mm| D: 100Basic size /mm|T: 20Basic size /mm|B: 19Basic size /mm|C: 16Installation size /mm|da (min):-Installation size /mm|db (max):-Installation dimension /mm| Da (min):-Installation size /mm|Da (max):-Installation size /mm|Db (min):-Installation size /mm|a1 (min): 4Installation size /mm|a2 (min): 6Installation size /mm|ra (max): 1Installation size /mm|rb (max): 1The other is /mm|a size: 19Other sizes /mm|r (min): 1Other sizes /mm|r1 (min): 1The calculated coefficient is |e: 0.33The calculated coefficient is |Y: 1.8The calculated coefficient is |Y0: 1Basic rated load /kN|Cr: 53.2Basic rated load /kN|C0r: 85.5The speed limit / (r/min) | fat: 3600The speed limit / (r/min) | oil: 4500The weight is /kg|W:-
- Q: Turbine turbo rod reduction box, tapered roller bearing at both ends of wormGap measuring method, tapered roller bearingsThe gap is +-0.03, so how do I know the gap is in the range?.
- The utility model relates to a special measuring tool for the axial clearance of a tapered roller bearing, relating to a measuring tool used for measuring the gap between single row tapered roller bearings. Including about two relative PTFE gland set, the upper and lower ends of the gland in two PTFE is formed in the end of the notch, which formed a central notch, a notch in the center of the PTFE sleeve in the two or so is PTFE gland and PTFE sleeve are connected together by wing screw. The utility model has the advantages of greatly improving the measuring accuracy and accuracy, reducing the measuring error, and improving the maintenance efficiency and quality. It avoids the deviation in the maintenance process due to the different experience of the operator, and is simple and easy to operate.
Send your message to us
Bearings double row tapered roller 352132
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
