Bearings double row cylindrical roller NN3032KTN1
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Double row cylindrical roller bearings
The rollers of the double row cylindrical roller bearing are usually guided by two flanges of a ring.
Because this assembly part composed of cage, roller and guide ring can be separated from another
ring, the cylindrical roller bearing belongs to separable bearing. This type of bearing can be easily
mounted and dismounted. Its advantages are obvious especially when there is interference fits
between the inner, outer ring and the axis, housing.
This bearing is usually subjected to radial load, only the single-row bearing with inner& outer rings
flanges.
- NN double row cylindrical roller bearings
This kind of bearings with inner rid, no outer rid.This assembly part can be separated from another ring, and they have larger radial load capacity than other single row cylindrical roller bearings with the same size, but the axial or housing is free axial displacement, so this kind of bearings can only bear the axial load.
★ Product Features:
The rollers of the cylindrical roller bearing are usually guided by two flanges of a ring.
Because this assembly part composed of cage, roller and guide ring can be separated from
another ring, the cylindrical roller bearing belongs to separable bearing. This type of bearing
can be easily mounted and dismounted. Its advantages are obvious especially when there is
interference fits between the inner, outer ring and the axis, housing.
This bearing is usually subjected to radial load, only the single-row bearing with inner& outer
rings flanges can bear small steady axial load or great intermittent axial load. It has a high
requirement on the processing of the fitting parts such as axis and housing bore, etc.
★Product Application:
Cylindrical roller bearings are mainly used for:
- Iron and steel metallurgical industry
- medium and large motor
- generator
- combustion engines
- gas tuibine
- machine tool spindle
- speed reducer
- loading and unloading machinery and all kinds of industrial machinery
Double Row Cylindrical Roller Bearings Catalogue
- Q:How much is the axial force of double row cylindrical roller bearings? How is it calculated?
- The cylindrical roller bearings have ribs can withstand certain axial force, the axial force for cylindrical but still belongs to the non normal stress, can cause early failure of the bearing, it is generally not given the axial bearing capacity, no formula
- Q:Thrust cylindrical roller bearings, the main use?
- Our factory uses the bearings of Changzhou Enke Bearing Co., Ltd., they have many kinds of bearings and meet various demands.
- Q:Which column roller bearing brand is good?
- Foreign SKF is better, the domestic is Kazakhstan axis, and then is Taiwan's Rui Rui, you can look at yourself, they recently in the Qingdao market to great influence, you can understand.
- Q:Full use cylindrical roller bearings, uses and advantages?
- Otherwise, due to lack of lubrication and high-speed operation will cause more wear and tear. I am a bearing
- Q:Cylindrical roller bearings NUP2311E mounting dimensions: Da (max): 69Da (min): 64DB (min): 72DC (min): 80Da (max): 111What are the specific meanings of these dimensions? Thank you, master
- Da means shoulder diameter, that is to say, the maximum shoulder size is 69mm, and the minimum is 64mm
- Q:How much is the shaft shoulder height of the 81105 cylindrical roller bearings with inner diameter 25mm?
- The shoulder height (diameter) shall be smaller than the big diameter of the bearing (less than 42), mainly for easy unloading.
- Q:Can cylindrical roller bearings bear high temperature?
- A class of grease, temperature is not more than 120 degrees, and then high temperature will lose lubrication performance, leading to the bearings can not work, in fact, bearing itself can withstand high temperature.
- Q:Cylindrical roller bearings, in the grease after the operation for a short period of time, the grease was thrown out (thrown to the end cap), resulting in roller and raceway between the lack of grease, lubrication poor. Decomposition found that the roller has round circumferential friction marks, but also on the roll, but compared to the roller is very slight. And there are relatively sound bearings, abnormal sound.Is this phenomenon normal? What if it doesn't work? What was the reason? What's the solution? StopThanks for your help!Assuming the grease is no problem, viscosity, consistency, selection is no problem If exclusion is the problem of grease, what other reasons can this be the case? ?
- The higher the speed, the greater the centrifugal force, this point should be mastered. If the grease of good quality, from the bearing chamber to consider the change of the bearing chamber space, the sides of the bearing sealed by using injection nozzle gun grease can improve the lubrication condition.
- Q:How are the twin row cylindrical roller bearings classified?
- Classification of double row cylindrical roller bearings:The NN0000 type cylindrical roller bearingsThe bearings are compact in structure and small in deformation under load, so they are especially suitable for the support of the spindle of machine tools. Because of its no outer wall, so you can install the outer ring and the inner ring assembly respectively (with roller and cage), does not limit the axial displacement of the shaft or housing, compared with the single row cylindrical roller bearing with the same radial size, can bear larger radial load.
- Q:What is the limit speed and rated dynamic load of NSK full M40-19g cylindrical roller bearings, HTF?
- NSK bearing type suffix solution of NSK bearing type by the basic code, prefix and post code, the basic code bearing series (including type) diameter and contact angle; pre code specific bearing; post code structure shape, bearing size, material, seal, retainer, clearance, heat tolerance processing, lubrication, change and other technical requirements, in addition to the basic code added after bearing code. NSK bearing model prefix F - deep groove ball bearing with flange outer ring (for D less than 10 mm), for example: F605. HR - high load tapered roller bearings, for example: HR30207J. MF - Flanged, outer race, deep groove ball bearings of specified sizes (D less than 10 mm), MF52. MR - deep groove ball bearings of specific size (for D less than 10 mm), for example: MR31. NSK bearing type rear code (1) internal structure A - internal design and standard different bearings. A - angular contact ball bearings with a contact angle of 30 degrees. A5 - angular contact ball bearings with a contact angle of 25 degrees. B - angular contact ball bearings with a contact angle of 40 degrees. C - angular contact ball bearings with a contact angle of 15 degrees. C - tapered roller bearings with a contact angle of 20 degrees.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Bearings double row cylindrical roller NN3032KTN1
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
