Automatic Blow Molding Machine for LED PC Cap
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 4 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Automatic Blow Molding Machine for LED PC Cap
LED PC Cap Automatic Blow Molding Machine Production Line Feature:
Reasonable equipment design, compact construction, simple operation
Equipment with high degree automatic, cost less expenses
Electrical equipment, Hydraulic system, Seal parts and Lubrication system adopt the components of famous factory in the world, with low failure rate.
To achieve the best quality guarantee, no matter the appearance and internal, automaticblow molding machine rate of quality goods is above 99%.
LED PC Cap Automatic Blow Molding Machine Technical Characteristic:
LED PC Cap Automatic Blow Molding Machine adopt European technology, control the hydraulic system with pressure and flow double proportion. The speed of pressure can adjust nonpolarly, high stability, exchange control the electrical system with man-machine interface. Operating surface has a machinery safety configuration, two electrical safety configuration to ensure the safety of operators.
PLC+touch screen, making the operation easy. Automatic malfunction alarm with selfdiagnosis, making the malfunction clear at a glance.
Center input die head, eliminating the knit line completely and making it easy to change the material and color.
Double linear rolling motion guider in moving, opening and closing mold, making the clamping force equally distributed, so the cut is smoother.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the produce purity.
LED PC Cap Automatic Blow Molding Machine Parameter:
Specifications | Unit | Parameters |
Max container capacity | L | 20 |
Extruder System |
|
|
Screw Diameter | mm | 82 |
Screw L/D ratio | L/D | 30:1 |
Screw Speed | rev. / min. | 10~50 |
Plasticizing Capacity | Seconds/die. | 60 |
Number of heating zone barrel | zone | 5 |
Extruder driving Power of barrel | KW | 34 |
Max Injection quantity | L | 1.5 |
Die Head |
|
|
Max die diameter | mm | 130 |
Number of heating zone | zone | 4 |
Extruder driving power | KW | 8.7 |
Clamping Device |
|
|
Platen Size(WxH） | mm | 440 x 600 |
Platen opening stroke | mm | 330~780 |
Clamping force | KN | 210 |
Next blowing Device |
|
|
Blowing the head off and landing trip | mm | 120 |
Manual control Blowing the head off and landing trip | mm | 80 |
Manipulator |
|
|
Take pieces of travel | mm | 1000 |
Framework |
|
|
Lift travel | mm | 250 |
Hydraulic System |
|
|
Rated pressure of big pump | Mpa | 14 |
Rated flow of big pump | L/min | 180 |
Motor power of Hydraulic pumps | KW | 45 |
Parison Controlling Of Hydraulic Servo System |
|
|
Rated pressure | Mpa | 6 |
Rated Flow | L/min | 22 |
Motor power of Hydraulic pumps | KW | 4 |
Pneumatical System |
|
|
Air source pressure | Mpa | 1 |
Working pressure | Mpa | 0.8 |
Air consumption | M3 / min. | 0.6 |
Electrical Control System |
|
|
Water Supply |
|
|
Water supply pressure | Mpa | 0.3 |
Power Supply | ||
Voltage | V | AC380V±10% |
Frequency | HZ | 50 |
Wire |
| 3Phase |
Total of rated power | KW | 91.7 |
Average power consumption | KW.h | 45 |
Total weight | Ton | 11 |
Dimension of machine （Lx W x H） | m | 5.3×2.7×4.5 |
LED PC Cap Automatic Blow Molding Machine Parts Picture:
LED PC Cap Automatic Blow Molding Machine Drawing Picture:
LED PC Cap Automatic Blow Molding Machine Electrical Parts Photo:
LED PC Cap Automatic Blow Molding Machine Products Photo:
- Q: What is the reason for the fuel injection of the turbine vacuum pump?
- The vacuum is too low, there may be reasons: there is a leak in 1 systems, mainly to the vacuum pump vacuum tank and the pipeline leakage; 2 kinds of oil, too much water into water vapor in vacuum environment, vacuum pump caused by excessive load, turn the small oil pump outlet valve; the 3, vacuum pump.
- Q: I use the 300 frame oil filter to filter the oil. What size filter paper should I use?
- Equipment model LY-300Flow rate 18000 L/HThe work pressure is less than 0.5MPaFiltration area (M2) 3.2Plate and frame size 280 * 280Filter paper size 320 * 320
- Q: What are the 3 basic requirements of hydraulic system for hydraulic oil filters?
- Three is based on their own circumstances to choose the right configuration. If not clear, you can go to ask a manufacturer to know
- Q: What happens when the oil heater is fired and the heater is tripped?
- With a universal watch to see the damping of the ground and heating rod damping, general leakage will trip, and there is open good and bad, useless, the naked eye to see the bad and bad probability is too small, must use table
- Q: How can I get rid of the cooking oil and the sediment filtered out by centrifugal oil filters?.
- After filtration of edible oil and sediment, you can add a ladle in the oil filter (number), so as not to export the filtered oil dirty and precipitation.
- Q: What kind of scheme is better for the oil filter except the impurity?
- Generally speaking, there are three basic oil impurities: solid impurities (with metal shavings and carbon black particles, etc.), regardless of hydraulic oil, lubricating oil, gear oil and other impurities, will greatly reduce the damage of gears surface seriously affect the service life of equipment and oil production safety performance!
- Q: Working principle and operation instructions of vacuum oil filter for oil press
- The vacuum oil filter is designed according to the different boiling points of water and oil. It consists of a vacuum heating tank, a fine filter, a condenser, a primary filter, a water tank, a vacuum pump, an oil drain pump and an electric cabinet
- Q: How to deal with the overload indication of two-stage vacuum oil filter
- The general overload occurs, the oil filter is a regular automatic shutdown, and you do not know how to sell oil filter of the door, this is the most basic customer service service.
- Q: What's wrong with the vacuum oil filter?
- Vacuum oil filters are slow to filter oil for the following reasons:Too many impurities, filter clogging; vacuum oil filter function of moisture, can filter impurities, which is the function of filtering impurities by strong magnetic adsorption and filter intercept, strong magnetic adsorption of iron metal and other impurities mainly through the filter to intercept, once the interception of impurities is overmuch, blocking the filter, a show the pressure is too large, on the one hand is to filter oil is very slow, serious when the direct damage to the filter.
- Q: What is the difference or connection between the oil filter and the oil filter?
- All belong to the fluid filtration industry, the difference is that the oil filter is the filter equipment, and the filter is at most a filter device
Send your message to us
Automatic Blow Molding Machine for LED PC Cap
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 4 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
