Auto glass ---Heat-reflective coated glass glass color change electronic glass films
- Ref Price:
-
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 20000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Heat-reflective coated glass is a kind of product formed after plating multilayer of metal and metallic compound films on the surface of glass through vacuum magnetron sputtering technology. It has the ability to control transmittance of visible light and keep solar radiation out of rooms, so as to reduce energy consumption of air-conditioner. What is more, it has colorful appearances and can provide many choices for modern building design. However, its main roles are to reduce the shading coefficient of glass and restrict direct penetration of solar radiation. Heat reflective coatings can not significantly reflect far infrared rays. Thus, it does not make much difference in the improvement of U value.
In summer, in areas which are exposed to strong sunlight, the thermal insulation effects of heat-reflective glass are very marked. Such glass can effectively reduce the solar radiation reaching houses. However, in environment where there is no sunlight such as at night or on rainy days, the thermal insulation effects produced by such glass is more or less the same as those by common white glass. From the perspective of energy saving, heat reflective glass is not suitable to be used in cold areas as these areas needs sunlight getting into houses for heating. The only purpose for using such glass in cold northern areas is for decoration.
● Characteristics
◆ Effectively restricting the incidence of direct solar radiation and producing obvious shading effects;
◆ A variety of reflective colors and very good decorative effects;
◆ Having very good view obstructing effects on indoor objects and architectural components;
◆ Ideal visible light transmittance and visible light reflectance;
◆ Weaken permeation of ultraviolet light
◆ Our company adopts unique technology which can perform curved tempering of it without affecting the performance of heat-reflective coated glass.
● Applicable Scope
It is widely applied in various curtain walls for buildings.
● Specification
◆ Size: Size of standard large glass: 2440mm×3660mm, 2400mm×3300mm, 2100mm×3300mm
Maximum size: 3300mm×6000mm, minimum size: 300mm×800mm
◆ Thickness: 3mm – 19mm
● Quality Standard
Such glass conforms to GB/T18915.1 “Coated Glass”.
● Notes
In installation, the film surface shall be faced inward and the glass surface outward. Protective measures shall also be taken to prevent the film surface of every single coated glass from being scratched.
- Q:China's well-known foreign glass factory which several
- Jin Jing Technology Zibo City, Shandong Province High-tech Development Zone gem town, the main products are solar ultra-white glass AVIC Sanxin, the main product is curtain wall glass Production base and factory in OKorder Shiyan production center, OKorder Pingshan large industrial area electronic function coating plant, Daya Bay special glass and curtain wall production base, OKorder Huairou curtain wall factory, OKorder Fengxian curtain wall factory, Hainan China Aerospace special glass production base, Solar photovoltaic glass (Bengbu) production base, China Airlines Sanxin Daya Bay glass curtain wall doors and windows research and development testing center. Company headquarters office located in OKorder City, Nanshan District, the new Baohui building seventeen floor.
- Q:Pro, have to know this year 2.5 mm glass price (architectural glass)
- The price is not the same around, it is recommended that you go to the region cost information network price.
- Q:The visible light transmittance of the glass is not good or good.
- Sunrise little place where the transparent high point is better, mainly to see where your glass is used
- Q:What is the difference between the car level and the construction grade?
- These grades are nothing more than a description of the quality requirements of glass, the use of the scope of use, processing technology is not the same. Construction-level requirements are the lowest (except home improvement), its overall flatness, visual effects requirements will not be too high. There is that its bloody rate will be higher than the car level. After all, there are significant differences in the processing of automotive glass and architectural glass.
- Q:Is it double? Than the average after the glass?
- Insulating glass: Hollow glass is composed of two layers of glass, surrounded by high strength, high air tightness composite adhesive glass and seal, glass bar adhesive seal, the middle of 6-9mm air layer filled with dry gas, With a desiccant to ensure the dryness of the air between the glass sheets. Figure. Its characteristics, due to leave a certain cavity, and has a relatively good insulation effect, so in the northern city has been widely used. In the sound insulation performance, the high-frequency noise (such as the voice of people talking, the school tweeter, etc.) in the insulating glass has good sound insulation effect, but the effect of low frequency noise (such as bus engine noise, train noise, aircraft noise, etc.) It is not obvious that the air cavity of the insulating glass resonates with the low frequency noise in the low frequency region (Note 1), and the low frequency noise is relatively easy to enter the room through the glass. Insulating glass production sub-machine line processing and manual processing of two, pipeline processing for large areas (ranging from thousands of square meters, more than 10,000 square meters) to use, manual processing is generally used for home users. Compared with the two processing methods, the quality of the product produced by the machine assembly line is relatively stable. The quality of the handmade product will be different because of the quality and process of each manufacturer. The hollow glass with poor quality will be over half a year or After a long time the internal fog and can not wash. So please pay attention to identify!
- Q:Do you know about the glass substrate production process?
- First of all, you have to figure out the usefulness of the glass substrate. Use different production processes are quite different. If only the architectural glass, automotive glass, ordinary electronic glass, float the most production, ultra-thin electronic glass multi-purpose overflow method, but also useful float production, several domestic glass factory in the ho floating production of ultra-thin electronic glass. ? Second, only to answer your float process, roughly, but let you know clearly.
- Q:What is the difference between the span on the architectural glass and the width of the glass?
- Width, refers to the size of a single piece of glass, that is, between the size of the two sides of the box
- Q:Glass for building construction mainly.
- The first known attempt to make glass in Canada began in 1819, when a German-born American entrepreneur worked for a year to establish a glass works at Rice Lake, Ontario, before his land grant was revoked and he abandoned the enterprise. The first recorded production of glass in Canada occurred in 1839 in the Mallorytown Glass Works, Ontario. Between 1840 and 1860, window glass and bottles were being made in five Canadian glass works in Quebec and Ontario. Window glass in Canada was first made in the 1850s in Quebec at the Canada Glass Works, Saint Jean, and the Ottawa Glass Works, Como. After 1880, new glass factories were established in Montreal, Wallaceburg (Ontario), and New Glasgow (Nova Scotia), with bottles, jars, and lamp chimneys their major products. By 1900, Canadian glass works were supplying about half of the Canadian market of 5.5 million people with bottles, lamps, and tableware. Most Canadian glass of this era consisted of pressed glass, machine-made glassware formed by pressure between a mechanically moving plunger and a mould. From 1839 to the present, glass works were established in forty-three Canadian communities from Nova Scotia to British Columbia. One of the largest was Dominion Glass with factories in Montreal, Toronto, Hamilton (Ontario), Wallaceburg, Winnipeg, Redcliff (Alberta), and Burnaby (British Columbia).
- Q:I bought a tempered glass film online, but I will not paste, I will not paste around, how do?
- First clean the phone screen, Mobile phone film is generally 3 layers, the need to paste the film is the middle of the outside, respectively, on both sides of the two, that is, 1 and 2. First look under the marked number 1, tear him, the middle of the film and the phone screen Alignment, press the (carefully Bubble, slowly scraping), paste after the removal of the other outside the outer membrane label 2, you can, how specific alignment of their own master, can not help you.
- Q:Glass bottom margin of the final decoration surface is less than 500 hollow glass how to install?
- Your insulating glass can not be regarded as a safe insulating glass, and if the building needs to comply with the "Building Safety Glass Management Regulations", such glass can not be used. If there is no strict requirements, from the perspective of building safety, only the safety glass (ie, tempered glass) one toward the outside, to prevent the outer film damage caused by serious harm to outsiders.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Auto glass ---Heat-reflective coated glass glass color change electronic glass films
- Ref Price:
-
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 20000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
