Product Description:
Application of of Fiberglass Mesh
1. External Thermo Insulating Composite System (ETICS) & External Insulating Finish System (EIFS)
2. External and internal plaster reinforcement
3. Electrical heating mats
4. Marble Slab Reinforcement / Mosaic Carrier
5. Asphalt reinforcement (roof water-proof)
6. Reinforced lightweight construction boards
- Q:nan
- Pave fiberglass mesh before the initial setting of the bottom ash.
- Q:What kind of fiberglass tape do you have?
- Produced by all kinds of fiber tape, good performance, quality stability.
- Q:What kind of fiberglass mesh is needed to touch the outer wall?
- The two functions are different, because one is used to heat the interior wall, and the other is the exterior wall heat preservation net
- Q:nan
- Fiberglass mesh uses glass fiber woven fabric as the substrate, and is immersed and coated by polymer emulsion resistance. Thus having good alkali resistance, flexibility and high warp-wise and weft tensile strength, it can be widely used in building internal and external wall insulation, waterproof, cracking and so on. Fiberglass mesh is mainly based on alkali-resistant fiberglass mesh, it uses the C or E-glass fiber yarn (main component is silicate which has good chemical stability) , twisted by special organizational structure-- leno weave, and then experiences high temperature heat processed through anti-alkaline, and enhancers. Alkali-resistant fiberglass mesh is based by middle-alkali or alkali-free glass fiber woven fabrics,and is processed by alkali resistant coating. The product is excellent in strength, adhesion, docile nature, positioning, which is widely used in enhanced wall and thermal insulation and waterproof of external wall.
- Q:nan
- Alkali-resistant fiberglass mesh alkali or alkali glass fiber woven fabric is based by alkali-resistant coating, the product is excellent in strength, adhesion, docile nature, positioning, which is widely used in enhanced wall and thermal insulation and waterproof of external wall.
- Q:nan
- When it is for polystyrene?board external wall thermal insulation.
- Q:nan
- Nobody can promise definitely. The mesh can prevent cracking. But it is difficult to completely eliminate.
- Q:nan
- Alkali resistant gridding cloth specifications: mesh: 5 mm * 5 mm, 4 mm * 4 mm gram weight: 80 g - 160 g / ㎡ length/roll: 50 m, 100 m or 200 m alkali-resistant glass fiber grid cloth features:
- Q:nan
- The acrylic in grid cloth can produce pungent smell and cause serious soil pollution after high temperature, which proves the environmental protection of glass fiber. It may cause serious air and soil pollution and contain harmful substance to respiratory system. And the core material of grid ding cloth is flame retardant and cannot be burnt.
- Q:nan
- The standard mesh specifications should include the mesh size and mesh number and they should correspond to each other. For example, 100 meshes refers to 100 meshes in each inch. Mesh size: 4.75mm Standard mesh number: 1 Mesh size: 4.00mm Standard mesh number:2 Mesh size: 3.35mm Standard mesh number: 3 Mesh size: 2.80mm Standard mesh number: 4 Mesh size: 2.36mm Standard mesh number: 5 Mesh size: 2.00mm Standard mesh number: 6 Mesh size: 1.70mm Standard mesh number:7 Mesh size: 1.40mm Standard mesh number: 8 Mesh size: 1.18mm Standard mesh number: 16 Mesh size: 1.00mm Standard mesh number:18 mesh size: 0.850mm Standard mesh number: 20 Mesh size: 0.710mm Standard mesh number: 25 Mesh size: 0.600mm Standard mesh number: 30 Mesh size: 0.500mm Standard mesh number: 35 Mesh size: 0.425mm Standard mesh number: 40 Mesh size: 0.355mm Standard mesh number: 45 Mesh size: 0.300mm Standard mesh number: 50 Mesh size: 0.250mm Standard mesh number: 60 Mesh size: 0.212mm Standard mesh number: 70 Mesh size: 0.180mm Standard mesh number: 80 Mesh size: 0.150mm Standard mesh number: 100 Mesh size: 0.125mm Standard mesh number: 120 Mesh size: 0.106mm Standard mesh number: 140 Mesh size: 0.090mm Standard mesh number: 170 Mesh size: 0.0750mm Standard mesh number: 200 Mesh size: 0.0630mm Standard mesh number: 230 Mesh size: 0.0530mm Standard mesh number: 270 Mesh size: 0.0450mm Standard mesh number: 325 Mesh size: 0.0374mm Standard mesh number: 400 A negative sign added before the mesh number refers that the mesh can leak out . For example, -100 meshes +200 meshes refers that these particles can be leaked out in 100 mesh size to 200 mesh size.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
