6/6kv,6/10kv three-core XLPE insulated Steel Tape Armored PVC sheathed power cable(YJV,YJLV)

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Nominal Cross- sectional Area of Cable	Nomin- allnsul- ation Th- lckness	She- ath Th- lckness	Approx Quter Dl- ameter Ofc- able		Approx Weight of Cable		D.C Realstance of Cable at 20°C		A.C Reals- tance at Operating Temperature
			Cu	AL	Cu	AL	Cu	AL	Cu	AL
			Cu	AL	Cu	AL	Cu	AL	Cu	AL
mm²	mm	mm	mm	mm	kg/km	kg/km	Ω/Km	Ω/Km	Ω/Km	Ω/Km
25	3.4	2.4	48.0	48.0	3190	2716	0.727	1.200	0.9271	1.5385
35	3.4	2.5	50.0	50.0	3731	3068	0.524	0.868	0.6683	1.1130
50	3.4	2.6	53.0	53.0	4396	3499	0.387	0.641	0.4936	0.8220
70	3.4	2.7	57.0	57.0	5198	3872	0.268	0.443	0.3420	0.5681
95	3.4	2.9	62.0	62.0	6350	4551	0.193	0.320	0.2465	0.4105
120	3.4	3.0	65.0	65.0	7257	4984	0.153	0.253	0.1956	0.3247
150	3.4	3.1	69.0	69.0	8383	5542	0.124	0.206	0.1588	0.2645
185	3.4	3.2	72.0	72.0	9741	6237	0.0991	0.164	0.1272	0.2108
240	3.4	3.3	78.0	78.0	11854	7309	0.0754	0.125	0.0972	0.1609
300	3.4	3.4	84.0	84.0	14861	9178	0.0601	0.100	0.0780	0.1290
400	3.4	3.5	90.0	90.0	17868	11047	0.0407	0.0778	0.0616	0.1010
500	3.4	3.6	96.0	96.0	29875	12916	0.0366	0.0605	0.0489	0.0789

Oparat- ing Cap- acity	Cable induction	Reactive impeda- nce of Cable	Positive Negative Sequence impedance		Zero Sequence impedance				Short-circuit Current
			Cu	AL	Cu		AL		Conductor		Screen
			Cu	AL	Cu tape	Cu Wire	Cu tape	Cu Wire	Cu	AL	Cu tape	Cu Wire
uF/Km	MH/Km	Ω/Km	Ω/Km	Ω/Km	Ω/Km	Ω/Km	Ω/Km	Ω/Km	KA	KA	KA	KA
0.1922	0.3797	0.1192	0.9347	1.5431	3.5159	2.2296	4.1272	2.8407	3.69	2.42	2.958	--
0.2116	0.3613	0.1134	0.6780	1.1188	3.2572	1.9738	3.7017	2.4182	5.15	3.37	2.958	--
0.2367	0.3423	0.1075	0.5053	0.8290	3.0824	1.8010	3.4106	2.1291	7.31	4.79	2.958	--
0.2693	0.3232	0.1015	0.3568	0.5773	2.9307	1.6512	3.1568	1.9823	10.2	6.68	2.958	--
0.2999	0.3092	0.0971	0.2651	0.4219	2.8352	1.0762	2.9991	1.2399	13.8	9.68	2.958	--
0.3266	0.2992	0.0939	0.2172	0.3382	2.7844	1.0262	2.9133	1.1551	17.4	11.4	2.958	--
0.3570	0.2807	0.0910	0.1834	0.2800	2.7476	0.9902	2.8532	1.0958	21.7	14.2	2.958	--
0.3873	0.2617	0.0885	0.1554	0.2289	2.7161	0.7300	2.7995	0.8134	26.7	17.5	2.958	--
0.4290	0.2726	0.0856	0.1301	0.1827	2.3194	0.6999	2.3808	0.7634	34.6	22.6	3.031	--
0.4706	0.2651	0.0832	0.1148	0.1541	2.2984	0.6824	2.3490	0.7334	43.1	26.2	3.031	--
0.5311	0.2564	0.0805	0.1023	0.1299	2.2825	0.6670	2.3213	0.7063	57.4	37.6	3.031	--
0.5839	0.2503	0.0786	0.0936	0.1123	2.2702	0.6552	2.2795	0.6851	71.7	47.0	3.031	--

Q: what is this cable called I can't find it anywhere because i don't know what it's called if anyone knows anything about it or who sells it please explain.Thanks: If this is what you're referring to, it's called a Y Power cable since it splits power to two sources using the same interface. If you're needing just two of the normal power cables, well that's different... Literally, they're called PC Power Cables. Kind of generic.

Q: Can a PoE powered cause a surge if I connect it to a Gigabit ethernet port?PoE Switch --gt; UTP cable --gt; Non-poe Gigabit Ethernet Switch: No, the PoE switch will initiate the connection with a low voltage signal to determine if the device at the other supports PoE or not. If not, it doesn't apply a current.

Q: im upgrading amps from 200 to 1000 and i was wondering if the cables will restrict the current at all? right now i have a 225 watt cord set: The first consideration is how much power can your speakers handle without self destructing? My opinion is that few can productively handle more than a couple of hundred, and that would be for very brief peaks. The average listening level in a domestic situation is on the order of a few watts - 10 or less. If you really have speakers that can handle that amount of power, and you want to deliver it efficiently, then you need to keep the 2-way resistance of the wires from the amps to the speakers at less than 10% of the speaker impedance. So for 4 ohm speakers (worst case) you want the line resistance to be below 0.4 ohms. For a 50 ft (100 ft 2-way) cable run, that suggests 16 AWG minimum wire gauge for each speaker. Your existing RCA cables should be OK assuming they only carry low level signals. If your present power service and grounding are on a 15 or 20 Amp branch circuit (US) , and no other heavy appliance loads (refrigerator, washer, airconditioner) are on that branch, then it is OK for the new amps.

Q: Does anyone with an Xbox 360 or someone that knows stuff about AC power cords tell me if the Belkin Standard Power Cable can be used with the xbox 360?Best answer gets 5.: Yep its the same thing as the 1 that came with the Xbox 360 but not made by Microsoft. Only problem is you'll still need the power block that came with the xbox 360.

Q: all my cables are pluged in but i have no power to printer lexmarkz43: Make sure all the power cable connections are tight first. Often where the power cable connects to the back of the printer, the cable can come loose. If all connections are tight, your power cable could possibly be bad, but as well so could the power supply of your printer.

Q: I know there is problem in the CPU, please suggest what is the problem and how much it is going to cost me?: Power cable into CPU? I guess you must possibly still have some of those dual power connector Power Supply? Those one where you can connect both the Power to the monitor and the input power to the CPU? If this is the case, your Power supply is possibly dying slowly. You need to change the poer supply. However, if that is not the kind of power supply that you have, I guess what you are pssibly talking about is that your monitor data communication cable which you connect to the CPU so that the data can be transmitted through to your monitor? If this is the case, then your monitor is not having any problem, it is just responding to the fact that it is properrly connected. Put on your system and see if your monitor do come on... If it comes on then everything is fine.... Now finally, if all these is not the case, then it mean you have not put your question properly. Rephrase your question so that you can have an answer... except ofcourse you are just trying to fool around...

Q: I have a feeling my power quot;brickis faulty and need to find a replacement, hopwever, none of the high street retailers quot;Game, Gamestation, HMV, Argosseem to stock them.: u can contact microsoft talk to them on teh phone for 5-10mins and theyll giv u a free one

Q: Low voltage power cable telemetry insulation resistance, the number should be used to shake the table? The More: If the upstairs said that the number of troughs in China. I am doing strong electricity. It is entirely possible.

Q: What is the difference between a YJLV cable and a VLV cable?: 240MM copper cable can be, casing with DN150 load 473KW how current only 560A, a little do not understand, you are not wrong

Q: if I buy a new 4 pronged power cable how should i install in the dryer,what should i do with the extra 4th wire of the cable,pls help Thanks: Remove the jumper from the neutral lug, (the center lug), to the appliance chassis. Attach the ground wire to the appliance chassis. The 3 lug terminal hooks up Hot-Neutral-Hot. Make DAMNED SURE the appliance chassis is grounded.

Send your message to us

*Email

*TEL

*Quantity

*Unit