0.6/1KV Aluminum XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
0.6/1KV Aluminum XLPE Power Cable
Standard
The product according to GB/T12706 " rated voltage 35KV and below copper, aluminum plastic insulated power cables " standards, while also based on user needs by the International Electrotechnical Commission standard IEC, British Standards , the German standards and U.S. standards.
Scope
This product is suitable for frequency 0.6/1KV and below rated voltage distribution networks or industrial installations in fixed installations.
Feature
Rated power frequency voltage U0 / U is 0.6/1KV.
Allow cable conductor maximum temperature is 90 ℃.
Short (the longest duration of no more than 5s) conductor temperature does not exceed 250 ℃.
The ambient temperature should not be less than 0 ℃.
Cable bend radius of not less than 15 times the cable diameter.
Model
| Type | Designation | No. of cores | Nominal cross section of conductor |
| YJLV | Aluminium conductor/XLPE insulation/PVC outer sheath Power Cable | 1, 2, 3, 4, 3+1,5, 4+1, 3+2 | 1.5~800mm2 |
| YJLY | Aluminium conductor/XLPE insulation/PE outer sheath Power Cable | 1, 2, 3, 4, 3+1,5, 4+1, 3+2 | 1.5~800mm2 |
| ZA-YJLV ZB-YJLV ZC-YJLV | Aluminium conductor/XLPE insulation flame-retardant Power Cable | 1, 2, 3, 4, 3+1,5, 4+1, 3+2 | 1.5~630mm2 |
| WDZA-YJLY WDZB-YJLY WDZC-YJLY | Aluminium conductor/XLPE insulation Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable | 1, 2, 3, 4, 3+1,5, 4+1, 3+2 | 1.5~800mm2 |
Introduction of our company
Our company is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable,House Electric Wire, Insulated Overhead Cable,Aluminium Conductor Steel Reinforced, PVC Control Cables,XLPE Power Cables,BV Electric Wires,Nylon Sheathed Cable,Buried Cable,High Voltage Cable,House Electric Wire,Single Core Flexible Copper Cable,Civil Wire And Cable etc. series of wire and cable products, sincerely welcome everyone to visit.
- Q: Its an 03 jetta with monsoon amp. I need step by step instructions on how to run the power cable. Pictures would be nice too. Thanks!!!!!
- think of exterior the container. actually. you do no longer could desire to bypass for the period of the passenger compartment...you could run the wires below the automobile. only be valuable to tie them up nicely. stable success.
- Q: Cable yjv-0.6 / 1kv-4 * 120 + 1 * 70 What does it mean?
- Cable trench as a power construction project should be cable trench construction construction design, cable trench construction program, according to the previous design requirements and programs in order to develop cable trench construction quality acceptance procedures
- Q: i bought a car from some guy..he had 2 amps but he took out one...he had the power cable running from one amp to the other. i just recently bought another amp and i was wondering if its safe to do this.he said it was working fine..he was powering 2 10 subwoofers..thats what im planning to do
- it is safe...but not the best method it really depends on the guage of the wire....best to have a single large gauge running to a distribution block then a wire for each amp comming out of the block to were the amps are. blocks are fairly cheap (usually less than 20 bucks) and safer...plus you get better power flow and 1 amp is not sucking all the power before it gets to the other
- Q: i bought a record player at a garage sale. it is the kind that has to be hook up to a sterio (no speakers of its own). it has the two cables to hook up to the sterio but no power cable. will the power come from the sterio or did i get ripped off?
- You need to get a power cable. If you do some research online maybe you can find the manufacturer of the turntable. It may be a common type cord or maybe not. If you e-mail me maybe I can help more.
- Q: My brother took his PS2 over a friends, lost the cables, and then took mine. So now I have to go steal my cables back every time I want to play, or not play. My PS2 is a piece of crap, but I can't afford a new one. Can I buy replacemt AV and power cables? I saw a MadCatz one, but the reviews said it was terrible. Thanks!
- the ps2 power cable is a standard cable. You will be able to get this cheaply ( you do not need to buy one that specifically states it is for ps2) if it fits, it'll work. You can buy replacement av cables for the ps2. they are the same cables used for the ps1 and the ps3.
- Q: How would I go about stripping 4 gauge power battery cable for my amp? oh and how would i screw the fuse holder down? with what kind of screws? thank you!
- I use a knife to strip that wire, just be careful not to nick the wire. Drill a hole and use sheet metal screws to screw the fuse holder down.
- Q: 3 (WDZBN-YJV-4x240 + 1x120) cable how to interpret
- 3 (WDZBN-YJV-4x240 + 1x120) cable is a low smoke halogen-free flame retardant (B grade) XLPE insulated - PE sheathed copper core power cable. The model of the cable is usually composed of eight parts: First, the use of code - not marked as the power cable, K for the control cable, P for the signal cable; so the power cable. Second, the insulation code -Z oil-impregnated paper, X rubber, V polyvinyl chloride, YJ cross-linked polyethylene; so for the cross-linked polyethylene insulation. Third, the conductor material code - not marked as copper, L is aluminum; therefore copper. Four, inner layer code-Q lead package, L aluminum bag, H rubber sleeve, V PVC jacket; so for the PVC jacket. . derived code-D no drip, P dry insulation. Sixth, the outer layer code. . special product code-TH wet tropical, TA dry tropical, ZR- (flame retardant), NH- (fire), WDZ- (low smoke zero halogen, enterprise standards); so low smoke halogen-free flame retardant The . rated voltage - unit KV; general cable are marked, the problem is estimated to write missing 0.6 / . the use of: rated phase voltage of 0.6KV, line voltage of 1KV. In the cable, 4 * 240 + 1 * 120 that there are 4 core 240 square copper wire, a 1-core 120 square copper wire.
- Q: i have a 2001 corolla with a new amplifier. when they wanted to test the amp after all wiring was done, they somehow wired the amps power cable to my negative connection on the battery. i turned on the electrics on the car and they all work. then i tried starting it, and how the engine wont start and the lights dim when im turning the key. what happened? and how can i fix this major screw up???
- You probably drained the battery down some how or have a bad connections at the battery. try charging the battery. I don't think you could have messed anything up too bad on the car.
- Q: My hard drive uses 15-pin SATA power connectorMY new power supply doesn't have this cable but instead it has 4 pin molex connector for the hard drive15-pin SATA power connector has 5 wires with these colors and order (white-black-red-black-orange)4 pin molex colors are (red-black-black-yellow)I want to use 15-pin 'connection head' from the broken power supply but as I said it has 5 wires while my new power supply gives me 4 wires!!!!! how to connect 4 wires to five wires head??? one wire has to be canceled i guess but which one?
- as quickly as upon a time, whilst i grow to be going to be on your continent for a jointly as, i offered an inverter that would enable me to run my workstation from a 12 volt motor vehicle battery. As I remember I had it set up so as that the inverter grow to be plugged in, charging the battery, and the workstation grow to be plugged into the inverter working off the mains - till the flexibility died - an unfancy ups, or possibly a actuality in merchandising ups? besides see what you will discover for installation one in each of those rig - it may remedy your problem, or it may be yet another waste of money. i'm able to assure you, i did not spend everywhere close to US$500 on the full undertaking.
- Q: I have a SATA DVD burner SATA 160GB HD .... but the PSU only comes with ONE SATA power connector .... great ..I was thinking about buying a SATA host controller card ... but I found out that that will only give me more SATA ports and take up one of my PCI slots LOLThen I was thinking about returning my SATA DVD burner for an IDE DVD burner ...
- What the sata connector/converter does is the same as the molex plug does on a ATA device, it just allows you to use the molex plugs as your power source for the SATA devices. Your devices should have a 4 pin connector for the molex so you really don't need the converter plug, as either way you only use one power plug. Don't use both (serial power connection 4 pin molex on one device) and there should be a warning label on the device that says the same.
Send your message to us
0.6/1KV Aluminum XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
