Order On-line Tracking
1. Function update fast can compare with famous brand
2. Long endurance design
3. Many patents from goverment
1.Air control cylinder construction and solenoid valve.
Air control cylinder together with solenoid valve, with no-feed oil dry bearings with minimum friction resistance, quick response, to increase the unit punching speed and reduce air flow loss.
2.High-Performance air compression components(Air F.R.L units)
Explosion-resistant casing is fitted on the outside of the filter and oil feeder to prevent broken, and to protect it from out-side impact.
The filter and oil feeder cup can be dismounted to facilitate cleaning and maintenance.
3.The cooling tubing employs 3/8" bronze tube compulsory cooling cycle circuits
All cooling water pipes of the transformer,SCR and electrodes will have excellent cooling efficiency,with additional temperature rise automatic cut-off switch to completely avoid burning the transformer, SCR in case the water supply is interrupted.
4.High conductivity secondary re-circuits
Secondary side-welding recircuits made by bronze, low resistance and well-conductivity.
5.Sold Frame Structure
Sturdy body construction, excellent adaptability, reducing the electrode deviation during process, increase the welding quality, and reduce the shock and impact noise of the machine body.
6.Both interior and exterior of machine are treated with coating
Coated with powder baked paint after acid pickling to extend the life time.
7.Safe and reliable pedal switch
Sturdy and safe pedal switch with quick starting and easy installation starting voltage DC 12V which can be used safely.
8.An optional press adjuster is provided for upward and downward adjustment
To respectively adjust the rising or lowering speed and impact during the pressurizing progress, to obtain excellent welding quality and speed.
9.Central air exhaust method to improve working environment
Concentrated exhausting system will not only reduce the exhaust noise, but also reduce oil mist spraying, to maintain clean working environment.(Fitted with exhaust outlet to exhaust air to outdoors.)
10.Insulation on upper part, simple and practical
Secondary conductor insulation, empolying upper insulation, iron powder adhesion, or lower part installed with welding appliances, to avoid frequent occurence of install welding appliances near the lower electrode.
11.All series with microcomputer precision control circuit
Microcomputer Control Device: Precision Control, No Effected By Unstable Power Supply Condition.
12.Transformer of excellent current conductivity and of minimum electric loss
Secondary circuit with high conductivity, a low input will produce output with powerful current with minimum power loss and low facility cost.
13.Welding current circuits with adoption of SCR no-contact-point switch
Main circuit switch employs no-contact-point SCR to increase high welding reliability and avoid accident caused by poor connection and save maintenance and repair expense.
Even under rigorous conditions, it will still assure stable welding current to obtain consistent and steady welding strength.
*Can design and make according to local voltage requirement(200V-600V).
*Big capacity model could be equipped with 3 phase transformers
Employing pushbutton digital switch and all series with micro circuit control.
1.Quick answering operation, correct activation, shock resistant, low trouble rate.
2.Prevention against interferences such as foreign singnal, thunder bolt, voltage and high frequency.
No error. Reliable application.
With auotmatic current circuit maintenance.
During the current connection, even the pedal switch is "OFF", it well maintain the power connection and voltage increasement, according to preset time lengths until the final process, to prevent inferior welding.
With power and voltage fluctuation compensation circuits.
During welding, for voltage and power within ±20%, the voltage and current fluctuate compensation circuit will activate prompt answering in one cycle and restore to the preset weiding requirement, therefore obtaining welding effects with consistent quality.(For current adjustment scale higher than 80, the compensation range is narrowed.)
Equiped with up-slope control for adjustment of preliminary welding current wave forms.
Adjust the up-slope control (0-9Hz) to gradually increase the welding current, avoid protruding current, avoid coarse welding surface, improve welding quality, especially to the welding of various galvanized sheed steel.
1. Manufacturer Overview
|Annual Output Value||US$5 Million - US$10 Million|
|Main Markets||North America
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|Export Percentage||71% - 80%|
|No.of Employees in Trade Department||3-5 People|
|Language Spoken:||English, Chinese, Japanese|
|Factory Size:||5,000-10,000 square meters|
|No. of Production Lines||Above 10|
|Contract Manufacturing||OEM Service Offered Design Service Offered|
|Product Price Range||Average|