Submersible Sewage Water Pump Cutter Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Submersible Sewage Water Pump Cutter Pump
Application
This series pump is widely used for sewage treatment of city construction discharge for architecture projects, hotel, mine, pond, dyeing and printing, paper making and textile industries.
It is the ideal tool for transportation of sludge, slurry, living sewage, feces and stale wastes, solid grains fiber, paper chips, sandy soil etc.
Model Description
100WQ 50-30-5
100: Drain aperture (mm)
WQ: Submersible sewage pump
50: Capacity (m3/hr)
30: Head (m)
5: Power (kW)
Operations Conditions
1. The medium temperature should not be over 60oC, the density 1200Kg/m3, and the pH value within 5-9.
2. During running, the pump must not be lower than the permitted lowest liquid level.
3. Rated voltage 380 V, rated frequency 50 Hz. The motor can run successfully, only under the condition the deviations of both rated voltage and frequency are not over ± 5%.
4. The maximum diameter of the solid grain going through the pump has not to be larger than 50% of that of the pump outlet.
Picture
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
- Q:We have a 92 cadillac deville, my husband can replace the water pump he justs need to know if you have to jack the motor a little. Please help before our car blows up!!
- Wow, okorder /
- Q:I have a 2001 2500HD duramax and it is leaking antifreeze under the truck. I leaks a a drop every second what could be causing this
- If you can narrow down the location to being from the actual water pump and not a line, It would be the seal in the water pump. The only option is to replace the water pump.
- Q:Okay, i have a 1997 dodge stratus with a 2.4l motor, recently i was out early in the morning when i heard what sounded like a loud whining noise, i quickly pulled over and killed the motor. Turns out the teeth were stripped off the timing belt and the water pump busted. How much would this cost to get it fixed, and what is the possibility the engine may be damaged? Also would it be worth fixing it, or just selling it for parts? Oh yeah, the car has 176k miles
- yes its probably worth fixing ,you shouldn't have no engine damage to it because that one doesn't run an interference engine ,all that should have to be done is new pulleys and a water pump,and new timing belt kit put on it,all of this will cost around 3-400 bucks though for everything,but its probably worth repairing,you cant buy a good car for 400 bucks,and if it ran well before then it should be alright once you get it repaired,good luck with it i own on of those and their good cars.
- Q:just pulled my well pipe up and installed a new foot valve will i have to fill the pipes back up with water before i can get it to pump
- How To Prime A Pump: (Need: Gallon jug of drinking water, a roll of teflon tape, and an adjustable wrench or a pipe wrench.) A. Unplug pump (or cut OFF breaker box at pump, if one). B. Unscrew (counter-clockwise) the largest (3/4) plug on top of pump head. C. Wrap 2-3 flat turns (clockwise only) of teflon tape on threads of plug. D. Pour water into plug hole until full, and quickly start threads of plug by hand. E. Plug in or turn on pump, and finger-tighten plug (air and water will bubble out around threads as you do so) until pump picks up prime. Then wrench-tighten plug when it does. Repeat all steps, if necessary, until you have full water pressure and pump cuts off on its own. Good Luck!
- Q:Please specify the reason, the more detailed the better, the head is the pump 1N fluid on the work done, when the flow rate increases, the shaft power increases, but it does not necessarily have to do with the head of the relationship
- First of all, the power of the pump is determined by the motor. When the power is certain, work must be done. According to w=mgh, the flow determines mg, the head is h, you think, if the flow rate is large, is the head smaller?. This is theoretical, and at the same time, you see, the water pump characteristic curve can also see that the flow rate increases, the corresponding smaller head.
- Q:What is the relationship between pump power, lift and flow?
- When the power is constant, the kinetic energy theorem is known as P=F*V, that is, W=F*S.In the water pump, it is said that the work done by the unit time pump = the gravity of the water flow * the displacement of the waterIt can be seen that:1, the power is certain, the head and the flow is inversely proportional.2, the greater the power, the greater the product of the head and flow.Therefore, when the flow is minimum, the pump head is the maximum; when the head is the minimum, the flow is the maximum.
- Q:I just put a new water pump in my jeep and after I put it in I ran it and it seemed to have a small leak while it was running it seems like it was coming from the crank which is under the water pump so it might be a leak coming from the bottom of the pump. When I turn the car off it is no longer a leak its more like pouring water out. What do you think it can be? I put a gasket and the blue silicone gasket sealant all around it and on it before I put it in so I have no idea. Thank you for the help.
- Sound like the new water pump is junk. The water is leaking out of the weep hole. That is a hole designed to leak when the pump bearing is going bad. It is a safety precaution so you don't fry the bearing and lock up your pulley system.
- Q:I have a quot;Rainbow Lifeguard Quiet One 6000external pump that I would like to use on a new chiller for my tank. The pump is rated at a little over 1500 gallons per hour. I'm debating between a couple of chillers, one that has a max flow rate of 1300 gph and another that has a max of 960.I know that you are only supposed to put any valves on the outflow side of the pump and lessening the flow to 1300 from 1500 doesn't seem like it would be that big of a problem, but I was curious it cutting it back to 960 would be hard on the pump in the long run. (I'm leaning towards the bigger chiller as although it may be overkill for my tank, it would let me have a little more water circulation.)
- I wouldn't restrict it more than about 10% or so personally. I would ask you to think about this: The rated flow rate on a pump is under perfect operating conditions and is usually a mathmatical model that cannot really be acheived in the real world. Your pump probbaly is several gallons per hours behind that. If the tank is on a stand and the pump on the floor, the head pressure alone may slow it to 1300 or below. Additional tubing, especially hard angles will further reduce the flow. I would suggest you get a flow meter ( you can probably borrow one from a plumber for a day) and test the actual flow rate in your set up. Remember that the chiller will further reduce the flow itself. Odds are good you are closer to the needed 1300 than you think. You can also install a small diverter valve in the line. Basically splitting the output from the pump into two lines. One can carry about 1250 GPH and the other the rest which it just returns to the tank unchilled. Hope that helps MM
- Q:I'm building a 79 SBC (old style) 350 and have a new stock water pump...what hose and where does it go from the top of the water pump to wherever? Heater hose? Or can I just leave it plugged. No A/C I just need a heater/defroster, etc...
- As a rule Chevy used two different sizes of heater hoses the one from the water pump should be 3/4 hose and the one from the top of the intake manifold should be 5/8. You should be able to see the different in sizes with the naked eye, they should go to the heater core inlet and outlet on the right side of your engine compartmant. (which is the passenger side)
- Q:my car ran hot a few times, its a 2006 chevy impala LS with about 50k miles.I do alot of driving but never had a problem until now. I took it to get an oil change and they said that I need a new water pump. I really dont know what that means but im afraid to drive my car until i get a new pump. i called around a few auto places and no one has the part. I called the chevy dealer and they said part and labor is $600. any suggestions of other places i can check for the part? can i still drive my car in the mean time? is it safe?are water pumps usually that expensive?
- 2006 Impala Water Pump
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Submersible Sewage Water Pump Cutter Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
