Metallurgical Coke of the size is 30- 80 mm

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of Metallurgical Coke of  the size is 30- 80 mm Description

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

To ensure the quality of coke, the choice is the most basic requirements of coking coal volatile matter, caking and coking properties; the vast majority of coking coal must go through washing, as much as possible to ensure low ash content, sulfur content and phosphorus content. When choosing a coking coal, but also must pay attention to the inflation pressure in the process of coal in coking. With low volatile coal coking, due to its colloid viscosity big, prone to high inflation pressure, harms the coke oven masonry, needs to be addressed by coal blending coking.

2. Main Features of the Metallurgical Coke of  the size is 30- 80 mm

     Quality assurance

     Mutual benefit

     Preferential price

     Various choice

3. Metallurgical Coke of  the size is 30- 80 mm Images:

 

Metallurgical Coke of  the size is 30- 80 mm

Metallurgical Coke of  the size is 30- 80 mm

Metallurgical Coke of  the size is 30- 80 mm

Metallurgical Coke of  the size is 30- 80 mm


4. Metallurgical Coke of  the size is 30- 80 mm Specification:


Parameters

Ash(DB)

Sulphur     (DB)

CSR

Size 30-80mm

+80mm

-30mm

Guarantee

12.5%max

0.7%max

62%min

90%min

5%max

5%max

5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1)Main type

Metallurgical coke is blast furnace coke, coke, iron alloy and nonferrous metal smelting with coke. As more than 90% of the metallurgical coke for blast furnace ironmaking, so often called the blast furnace coke metallurgical coke.

Foundry coke is dedicated to cupola molten iron. Coke is the main fuel of cupola molten iron. Its role is hot metal melting furnace charge and overheating, support stock column maintain its good air permeability. As a result, coke blocks should have large, low reactivity, low porosity, with sufficient impact crushing strength, ash content and low sulfur content.

2) Application of coke

     Used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury

     Other non-ferrous metal smelting of blast furnace,

     Reducing agent, compound

     The function of stock column frame.

3) The history of coke

Our country's metallurgical industry has a long history, is the original fuel charcoal smelting industry, due to the charcoal burning temperature is lower, and short duration of fire and not easy to master hour, therefore, directly affect the level of smelting, to make the steel quality is not guaranteed. Later, people use coal as smelting, coal combustion temperature is higher, and the combustion duration is longer than charcoal, but easily broken after coal is heated in the oven, affect the burden of permeability, and high content of sulfur in coal, directly affect the quality of the cast iron. After a period of practice, it has been found that the coal after dry distillation (i.e., separated flame heating), volatile components may be removed, and the porosity increased, resembling charcoal, fire is better than that of coal, but also can avoid charcoal and coal. This after carbonization of coal is coke.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the amount of waste gas produced by a ton of coke burning
Process for producing coke, coke oven gas and coking chemical products by thermal decomposition and coking.
Q:What are the indicators of first grade coke and the two grade coke?
The mechanical strength of the mechanical strength of ash sulfur%% volatile(crush strength M40) (abrasion strength M10)
Q:How coke is involved in steelmaking,
Molten iron is produced in a reducing atmosphere of the blast furnace, which is then supplied to the steelmaking plant for steelmaking.
Q:How much coke is needed for a ton of iron
Blast furnace production is continuous. A generation of blast furnace (from start-up to overhaul shutdown of generation) to continuous production of more than ten years. The production, from the top (usually roof is composed by Bell and hopper of modern blast furnace is the valve bell and bell less top) constant load of iron ore, coke, flux, from the lower part of blast furnace tuyere blowing hot air (1000 to 1300 degrees Celsius), sprayed into the oil, coal or natural gas. Fuel
Q:Braised meat burning coke, iron black layer, I do not know how to clean, please help answer
Tomatoes to the bottom of the potNot a few good tomatoes in the pot boil, it will naturally fall.4, beer and liquor to the bottom of the potIf cooking is careful not to paste pot, the pot dish, if not easy to brush off, can pour a little wine and beer and a small amount of water (1:1:0.5 ratio) mixed cover, placed 5 minutes after it is easy to scrub clean.
Q:How to determine the maturity of coke or not?
Ash in coke: the percentage of ash contained in metallurgical coke. The influence of coke ash on blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%. Therefore, it is necessary to reduce the ash content of coke.The volatile content in coke: refers to the percentage of the total amount of volatiles in metallurgical coke. Coke maturity can be judged according to the volatile content of coke. If the volatile content is greater than 1.5%, it is said that coke; volatile less than 0.5 - 0.7%, it is said to burn; generally mature metallurgical coke volatile is divided into about 1%.
Q:The chemical composition of coke is m10.m25
Quality index of cokeThe quality index of coke coke [] is a solid product of high temperature carbonization, the main ingredient is carbon, is the pore structure has a crack and irregular (or pore porous). The crack number directly affects the coke strength and crushing strength, the index of general degree (refer to how to crack crack length unit the volume of coke in the measure.) to measure the pore structure of the main indicators for the porosity (coke pore volume only percentage of the total volume) that it affects the coke reactivity and strength
Q:What is the use of petroleum coke
Petroleum coke, petroleum coke. Solid residues produced by high temperature coking of residual oil, residual oil or bitumen from petroleum refining.
Q:What is the difference between the industrial analysis of coke and the industrial analysis of coal samples
There are also ISO and ASTM, I do not know what you want the standard?
Q:What is the use of coke
From the distribution of coke production in China, the distribution of coking enterprises in China is unbalanced, which is mainly distributed in North China, East China and northeast china. Three, the use of coke coke is mainly used in blast furnace ironmaking and copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting furnace, reducing agent, heating agent and the role of the material column skeleton. The use of coke instead of charcoal in the blast furnace has laid the foundation for the large-scale development of modern blast furnaces and is a major milestone in the history of metallurgy. In order to achieve better technical and economic indexes of blast furnace operation, the coke (metallurgical coke) must have proper chemical and physical properties. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength, but requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range