Met Coke CSR 62 Origin China bset price

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
1000 m.t.
Supply Capability:
10000000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Speficications of Met Coke CSR 62 China Origin

Magnetic hematite is mainly formed by the magnetite under the condition of oxidation by the secondary change.Magnetite of Fe2 + completely replaced by the Fe3 + (3 Fe2 + and Fe3 + 2), so a third of Fe2 + occupied octahedral position vacancy.In addition, the magnetic hematite can be made of fine iron ore fluid loss and form, also have formed by iron oxide by organic.

 

Parameters

Guarantee

Rejection

Total Moisture  (As received basis)

8%  max

Ash (dry basis)

13.5% max

> 13.5%

Volatile Matter (dry basis)

1.5% max

> 1.8%

Sulphur (dry basis)

0.65% max

> 0.75%

Phosphorus (dry basis)

0.035% max

> 0.045%

M10

9% max

> 10%

M40

80% min

80%

CSR

64% min

60%

CRI

25% max

> 30%

Size 30-80   mm

85% min

+80   mm

5% max

> 8%

-30mm

5% max

> 8%

Usage/Applications

To be used for blast furnace in steel plants

Main Features of the Product

Low ash

Ready to ship in stock

Inspection

Inspectorate at loading port to be final for bothparties in quality and quantity

Packaging & Delivery

1. Packaging: in bulk

2. Delivery: loading rate of 4,000 mt PWWD SHINC at Lianyuangang port

                 loading rate of 6,000 mt PWWD SHINC at Tianjin port




Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Coke and coal is one thing
Not the same thing.Coal is often said of coal, including bituminous coal, lignite, anthracite, etc.
Q:What is the difference between metallurgical coke and chemical coke
Quality index of cokeCoke is a solid product of high temperature carbonization, the main component is carbon, is a crack and irregular pore structure (or porous). The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke). The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke. Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test.
Q:Who knows the proportion of pig iron and coke used in Cupola
There is doubt: the export rate is lower than the standard exception.4, blank blank processing: according to customer requirements of different direct sales, some need to continue processing after the sale, the ordinary rough machined after a blank rate of about more than 70%, about 30% (excluding scrap scrap), dryer enterprises after after machining yield is about 25% ~ 30% (including waste scrap and iron, basically use recycled material, material waste accounted for ratio of 30% ~ 40%). To 1.5M x 2M cylinder, for example, rough weight of about 5.8 tons ~ ~ 6 tons (standard cylinder, including the cylinder head) cylinder head rough weight of about 1.7 tons ~ ~ 1.8 tons, cylinder weight of about about 4.2 tons. After processing, the cylinder head weighs about 0.5 tons to 0.6 tons, accounting for the proportion of about 65% to 70% head (excluding scrap, scrap accounted for about 10%, blank cylinder head and iron) accounted for about 30% ~ 35% blank cylinder head, accounted for the proportion is about 40% recycled waste, scrap iron accounted for under foot material proportion 60%, enterprises can not return direct sales (currently, only production enterprises can use recycled scrap iron). Total iron blank ratio is about 15% ~ 18%.
Q:What are the ingredients of coke
Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke.Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
Q:Coke is divided into several kinds of specifications ah
Use:Fixed carbon above 83; sulfur below 0.5; volatile below 1.5; about 15 ash coke for metallurgical e: mechanism: {; applied to steel coke particle size 8cm-150cm:{} with hot metal; for motor shell, radiator, mechanical counterweight cast char: {of} fertilizer for hot metal; coke bulk modified casting shell, radiator, electric}: {mechanical counterweight for ordinary casting furnace;} machinery parts and other parts suitable for roughly 2-3.5 tons of coke particle size for 25cm:{type common casting and casting products slightly strict; such as fire pump pipe fastener} fixed carbon above 85; volatile ash 13.5 1.5.; the following: 0.5; sulfur with coke particle size above 8cm for ordinary casting: {} 25cm {type coke particle size; for precision casting and ductile casting improved coke}:
Q:What are the requirements for the quality of coke in blast furnace smelting
Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%.Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test.
Q:Relationship between coke M40 and M25
50 kilograms of size greater than 60 mm coke coke samples, in meters Qom in the drum at 50 rpm speed of 100 revolutions (4 minutes), with the aperture is 40 mm (25 mm) sieve screening, measuring more than 40 mm (25 mm) and the weight percentage of the coke, the total weight of the coke drum, denoted as M40 (or M25).
Q:It was concluded that the following two facts: coke can not be used to restore aluminum ore, but can be used to restore copper and iron ore
Coke can not be used to restore aluminum ore, but can be used to restore copper and iron ore, indicating that aluminum is the most active
Q:The difference between coal and coke
The production of coke products in general is mainly based on high temperature carbonization, and the carbonization temperature usually needs about 1000 degrees celsius. After years of development, the current large-scale coke furnace equipment and technology is relatively mature, have equipment to improve the yield so as to achieve large-scale production conditions, coke furnace built in recent years, each with a yield of about 500 thousand tons, the highest can be even more than 1 million tons / year, such as the recent launch of mine international coking plant two chamber coke oven 7.63 m, each with a yield of 1 million 100 thousand tons per year.
Q:What does the M40% and M25% mean in the analysis of coke?
M40% and M25% represent the breaking strength rate, 40%>25%, which means that the M40% coke is more resistant than M25%

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range