Description of Our Glazed Porcelain Tile :
800*800 full glazed porcelain tile
Specifications of Our Glazed Porcelain Tile:
Features of Our Glazed Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Glazed Porcelain Tile:
Provision of Standard
The deviation ,in percent of the average side for each tile from the work size.
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment .
Straightness of sides
A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles
Thickness ≥ 7.5mm,not less than 1300N
Modulus of Rupture
Thermal shock resustance
Test method availuble after 10 times testing
Mark(On the package)
Manufacturer logo or/and Origin
surfacecharacter ,GL OR UGL
Application of Our Glazed Porcelain Tile:
- Q:Waterproof tiles
- But can not be tiled after the tile with silicone or silicon Wan soaked, but also waterproof
- Q:How do the concrete on the outer wall tiles be removed?
- You can also wipe with a steel ball sticky oxalic acid. Sassafras are good to rinse oxalic acid with water. (Note: oxalic acid is corrosive, with the time must be allocated a good proportion, pay attention to personal protection).
Optional cement mortar cleaning agent. Depending on the dirty situation can be diluted 1-5 times.
How to use: Spray the sand on the mortar contaminated area, wait a moment to scrub directly. The disadvantage is the sand of the Department of chemical products, should be in the same place with a small enemy sand enemy, confirmed and then used a large area. Should try to avoid with stainless steel, plating, coated glass and other surface contact, if the pollution should be washed as soon as possible with water rinse residual liquid.
- Q:Is it good to use a white cement?
- When using tiles, it is recommended to use a creping agent, which is superior to white cement caulking from firmness and beauty.
Tile Cracking agent, also known as brick trenching agent, the material is from the cement, quartz sand, filled with pigments with a variety of additives made by mechanical mixing evenly. Its characteristics:
1, strong adhesion and toughness, can absorb the base surface and the continuous vibration of the brick and the collection, to prevent cracks.
2, with a hydrophobic function, to prevent moisture from the tile seam to prevent moisture and eliminate the phenomenon of anti-pulp tears.
3, non-toxic, tasteless, non-polluting, anti-mildew antibacterial, to ensure that the face is constant often new.
4, colorful, to meet the requirements of different decorative effects. (Color can be deployed on demand side)
- Q:What is transparent tiles
- Fashionable, bright ice crack, high density, high hardness, good flatness, covered with the line after the neat, smooth and beautiful, non-general market compared to ordinary tiles.
- Q:How is oriental Paul tiles?
- 4 test weight
The same size of the floor tiles, the greater the weight, the better the quality, which is a relatively simple and rugged and effective selection method. Good quality tiles (800mm * 800mm) a pack of three, not a regular exercise of adult men is difficult to move up alone. (I belong to the type of extreme lack of exercise, two Nobel 800mm * 800mm tiles I can not move a person)
Weight reference: a 800mm * 800mm tile about 30 pounds to 40 pounds, a 600mm * 600mm tile about 12 pounds to 18 pounds, a 300mm * 300mm tile about 3 pounds to 5 pounds.
5 listen to the sound
With a hard object (such as carrying the key) flick, the sound more crisp, the higher the degree of porcelain, the better the quality. You can also use the fingers to clamp the corner of the tile, so that the tiles hanging down, with the other hand flick the lower tiles, the more clear the sound, the better the quality.
This method may be more virtual, we should listen to a few pieces of different price tiles in order to have the ability to accurately determine.
6 to see the water absorption
In the back of the tiles, watching the water spread after the speed of water, in general, the slower the water, indicating that the greater the density of tiles, the better the quality. Tiles should not absorb water, if the tiles to absorb water, and from the front to see the water stains, that shows the quality is poor, do not buy. Wall is a certain degree of water absorption, it is difficult to use this method to test, but now the wall and floor tiles are basically supporting the sale of tiles qualified, wall is also no big problem.
Poor quality of the tiles on the back of a larger water absorption
- Q:80 by 80 tiles a box of 3 pieces equal to how many squares?
- 1, the area is: 0.8 * 0.8 * 3 square = 1.92 square, but the decoration, then some places can not be calculated by this, the actual use of the area may be smaller than this, because the corner or irregular areas need to cut the tile The
2, tiles, tiles, is a refractory metal oxide and semi-metal oxide, through the grinding, mixing, pressing, glazing, sintering process, and the formation of an acid-resistant porcelain or stone, etc. Or decorative materials, called tiles. The raw materials are mostly made of clay, quartz sand and so on.
- Q:Platinum crown tiles ok
- You have not provided the brand we have not tested, to provide you with the choice of tiles under the method, I hope to help you.
1 election origin
Almost tiles on the market come from two places: Guangdong and Shandong. Guangdong brick overall quality is better than Shandong brick, domestic brands of ceramic tile origin is also generally from Guangdong, so a simple choice of Guangdong brick. (Shandong bricks are also good quality, but more need to blink of an eye).
2 to see flatness
Flatness is very critical, if the flatness is very poor, it is difficult to shop in the edge of each tile are not the edge of the gap, there is not only the impact of visual effects affected, serious and even cause Ge (gè) feet.
Method one: the same paragraph of the two tiles on the face of the table, his hands pinching side, observe the other side of the tilt, tilt the smaller, the higher the flatness. (This method is suitable for fully flattened bricks that do not apply to antique tiles and bricks with special craftsmanship)
Method 2: a brick vertical placed on the same piece of another flat brick surface, observe the gap between the two bricks, less light, the higher the flatness, the better the quality, in my tested tiles , Nobel's tile flatness is the best, almost no light, we can test their own time to try all four. (This method does not apply to antique tiles)
- Q:Tile loss rate
- The loss depends on your room size and size of the tile size ratio ~ a home a sample how much you can calculate it ~ for example, your parents are 1 meter wide and 0.5 meters your tile is 300 # 400 by piece The brick can only cut 2 knife count your loss is greater than 50% of the ~ If you are talking about man-made loss that I can resolutely tell you is 0 occasionally broken one or two is normal and reasonable.
- Q:How is the wax on the new tiles clean?
- With water poured in a wax on the tile, the wax after melting by the heat floating in the water, until the water temperature drops, with a rag of a touch of water and wax with the erase.You try it, listen to others say. There is a dry wipes often paint, paint more than no, but it is very environmentally friendly, or you use a rag with a little detergent and other things will have the effect of this is a kung fu live, do not impatient! It is too troublesome to find a clean look over the whole!
- Q:How many squares are tiles?
- You use the brick side length * side length * block number = square number such as: 800 floor tiles is: 0.8 * 0.8 = 0.64 square, and then multiplied by 4 = 2.56 square meters 300 tiles is: 0.3 * 0.3 = 0.09 square, then Multiplied by 12 pieces = 1.08 square meters tiles have two boxes, three pieces of a box, four, eight, ten one box from 300 * 300 ------ 1000 * 1000 specifications of the larger The smaller the number of pieces
Using the production technology, we design a series of noble, elegant, fashion, natural style is high-end ceramic products, to provide more system for modern household adornment, comprehensive selection.
1. Manufacturer Overview
||Guangdong, China (Mainland)
|Annual Output Value
||Above US$ 10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||Foshan PORT, China
||21% - 30%
|No.of Employees in Trade Department
||Above 100,0 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range