Glazed Porcelain Tile Cement Series CE60A/60B/60C

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Glazed Porcelain Tile Cement Series CE60A/60B/60C is one of the most popular color of Glazed Porcelain Tile Serie, which is one serie of Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas.

Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.

 

Product Features

 

  Glazed Porcelain Tile, 

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.

 

Product Specification 

 

  Tile Type: Glazed Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl

 

Production Line & Package 

 

Glazed Porcelain Tile Cement Series CE60A/60B/60C

Glazed Porcelain Tile Cement Series CE60A/60B/60C



FAQ

 

1.    For Polished Porcelain Tile, is the 30*60 available?

—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.

 

2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.

 

3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.

 

         4. Why choose our Floor Tile? 


        1).  Less investment and shorter lead time because we ship tiles directly from Factory.

        2).  Better ETD and more stable price bacause we keep abundant stock for future needs.
        3).  Experienced service because we have an experienced team and we could send our experienced engineer for giving                    useful instruction on your jobsite.
        4). Better warranty of products because we enjoy a reputation and we have got varies certificates and awards for our     

            products.  



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the high-end brands in the tiles?
Cost-effective I know, here is the brand of Foshan, not to say that other places. I suggest you choose Haiman Lin ceramics, is the engineering tiles, polished tiles first brand, the original cast factory, style and more good quality. You look at their official website to understand it
Q:why is my bathroom tile hot?
is it floor tile? Wall tile or what? sorry to hear about this problem, if you are a homeowner its up to you, if you are renting, alert your agent ASAP, heat is an indication of fire, water, gas or air permeating the structure where it does not belong. Leave the building if you sense any danger or cannot track its source. You could also contact your local firedepartment for tips over the phone.
Q:can ceramic wall tiles be laid from the ceiling down?
measure the wall height and measure the tile. Split the difference so that you don't have a sliver of tile at the end of you installation. Take a level and draw a line in the center of the wall as a divider for tile layout. Make sure again you have at least a good amount of a tile at the bottom and the top. You can start from that line using tile adhesive. Don'r glob it on use an 1/8th inch tooth trowel. You dont need thin set except for a floor. BTW the best rock to use in this area is purple board. It resists mold. Good Luck
Q:How do you remove kilz from tile floors?
Depending on the type of tile you might be able to use a sharp knife (exacto or paring knife) and gently remove the spots. If you have any kind of ceramic tile that would work (in my experience) except perhaps on the grouted areas. If you have grout and the Kilz is in/on the grout you might have to actually scrape some of the grout off and then reseal the grout. Good luck. It's laborious work but it should work. If you have linoleum tile I wouldn't do that because it might remove the finish. The next time you go to the paint dept. at the store ask them how to do it if you haven't solved the problem
Q:Where is the cheapest shower tile?
Where I live we have a place that sells used house fixtures. They go to demolition sites and scavage everything that is usable. They resell it and the proceeds go to the Habitat for Humanity. You can often get very inexpensive materials there. Maybe your city has a place like this too.
Q:Im buying a house the main bathroom has ugly blue tile on walls can I paint those tiles a different color?
You say it's for the 40's is the tile plastic?, if so get a wide 3-4'' metal scraper and pop all the tile off the first one may need a little elbow grease but once you get the first one the rest goes easily. The glue will still be on the wall so invest in a good heat gun and heat and scrape all the glue off the walls. These walls should be plaster so you shouldn't have a problem. What ever is left on the walls can be lightly sanded til smooth, wash walls, prime and paint. It will take some time but the end result is worth it. I did this in a 50's kitchen and bathroom, the tile in the tub was even on the ceiling. Good luck! If the tile is ceramic its a whole other story and project. Painting than would be advisable because you would ruin most of the walls removing ceramic tiles.
Q:Slate tile without grout?
No don t even try. First all tile and especially stones need the grout. Grout improves the strength of set tiles. Stones and again especially slate is not perfectly uniform and having grout allows them to look aligned. Dirt and debris ( and especially ashes) will get in those thin joints and be dirty and a PIA to clean and keep clean. Being on a hearth, w/o grout would be a fire hazard but at least you have a gas insert where this wouldn t be a factor. Any questions you can e mail me through my avatar and check my qualifications there. GL
Q:White Tiles With Grey Spots?
Tile won t stain under normal circumstances so I suspect the glaze is a bit worn off rt in front of the fridge.. That can be a wet spot that will dry eventually or stain the tile body in which you have no choice but to r and r the tile(s).. GL
Q:Hard tiling question.?
If you are tiling a 2 * n rectangle with 1 * 2 tiles, you would line up 1 tile along the end measuring 2, then, becasue the other dimension of the tile is 1, you would need n tiles For 2 * 2 tiles you would do the same thing except that each tile would cover 2 units of the side that is n units, so you would need n/2 tiles
Q:In tiling a small square area in front of my entrance, where do I lay the first tile: middle or a corner?
Start in the middle. That's where the eye naturally strays. The edges, or corners will blend in. Yes, you may have to trim the pieces on the edges, but, it will be balanced from the center out. Good Luck!

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range