Full Polished Glazed Porcelain Tile 600 YDL6AA258

Ref Price:
Loading Port:
Guangzhou
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Full Polished Glazed Porcelain Tile 600 YDL6AA258 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one.

 

Product Features

 

  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl

 

Production Line & Package 

 

Full Polished Glazed Porcelain Tile 600 YDL6AA258

Full Polished Glazed Porcelain Tile 600 YDL6AA258


 

 

FAQ

 

1.    For Polished Porcelain Tile, is the 30*60 available?

—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.

 

2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.

 

3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:After my saltillo tile floors were flooded a white powder has formed on the tile.?
Are these tiles applied directly to a concrete floor that sits on the ground? If so, it sounds like efflorescence, where salt moves from the ground into the floor and then through the tile appearing as a white film on the surface of the tile (it happens through basement walls and if bricks are placed on the ground). Scrubbing may not be enough. You may have to check at your local hardware store for a sealer for your tiles or a cleaner strong enough to prevent the film from forming again.
Q:What kind of tile should I use?
After installing thousands of sq. ft. of tile and remodeling more bathrooms than much else I cant imagine NOT using glazed/fired ceramic...especially in a shower/tub area. The reason is fairly obvious...ceramic/porcelain, is Not strictly porous, and certainly easier to clean. Although my entire bathroom is done in 16 x 16 tile to match the floor, I suggest no larger than 4 x4 or 6 x 6 and/or accomodate any trim type/ decorative tiles you want. I also tile all the way to the ceiling. Steven Wolf Obviously ceramic can be purchased in LOOK LIKE ANYTHING. It need not strictly have a GLOSS, but certainly should be glazed to allow no niches for mold; etc; which you'll have to address regularly in the grout lines anyway.
Q:sheet laminate over counter tiles?
The best answer, of course, is to pull the tile. If you want, however, you can go right over the top by gluing a sheet of 1/8 or 1/4 sheet product (lauan or cheap paneling) over the tile using mastic. Making sure it is level and solid, you can then apply laminate directly over the top. I've done it on two remodels on rental properties and it worked just fine.
Q:How does the tile stick up?
Want to thin point will wall flatness is good, the actual tile adhesive layer is less than 1cm; most of the thickness of the leveling layer, the general construction plaster 2 m error of about 1-1.5cm, then the actual paste tile gray The thickness of the need to reach 2-2.5cm, and then thin can not be friends, or paste in the glass is very flat on the basis of
Q:Put ceramic tile in Bathroom.?
Just try to apply the molding to the wall, you will need to secure it on with common wall adhesive. Be sure to get a urethane-based, heavy-duty wall or wood glue. This will typically come in a tube similar to caulk and can be applied in long strips using a caulking gun. You will need enough to make several passes up and down the wall where you want to install the molding. Strength of the adhesive should not be a major concern, as any commercially available wall glue will be plenty strong enough to hold molding to the wall material.
Q:What ceiling tiles are used in restaurant kitchens and bathrooms?
This Site Might Help You. RE: What ceiling tiles are used in restaurant kitchens and bathrooms? What type, brand and or size ceiling tiles should be used in a commercial kitchen and bathroom
Q:Should i tile right to the floor?
You really need a baseboard. Especially if your home is not on a concrete slab. Your sub floor expands and contracts with weather and humidity changes. This will put stress on your grouted areas. It can also trap moisture which will create mold underneath your floor.
Q:White powder residue on Vinyl Tiles?
Mpffff... 12 x 12 tiles are extremely unlikely to be asbestos-based. Efflorescence happens only with concrete/mortar-based materials. However, if the tiles are loosely laid (still solid, but with gaps or areas of poor adhesion) over concrete with moisture underneath, you could be getting efflorescence penetrating the tile - and if this is a slab-on-grade, that is even likely. If it is laid over anything but concrete that is not the issue. Older VCT (vinyl composition tile) will deteriorate with age and the surface will powder and crumble. But by this point, the stuff should be coming right off the floor.
Q:I need to put the tiles on the floor in the bathroom.Explain in detail how to?
If the bathroom has timber floor boards with a covering on top remove any plastic tiles or old carpets and lay thin plywood on top screwed down to the floorboards as a solid base for the new tiles (you omit this if the bathroom has a concrete floor) then either buy some floor tiles adhesive (for plastic tiles) or mix some tile cement (for ceramic tiles) spread the adhesive /tile cement on the floor base using a slotted trowel that applies the adhesive/cement in rows, then follow the adhesive/cement makers instructions to leave for a period - then lay the plastic tiles edges butting or ceramic tiles with plastic spacers to allow for the grout to be added between the tiles, start from the back working obviously towards the door. You can unscrew the toilet pan and slide tiles underneath likewise the bathtub panels remove to fit the tiles underneath (note you will have to trim the bathtub panel so it can be re fitted over the tiles, you may wish to tile up to baseboards (skirting UK) or remove them and tile underneath. As you can see this job is quite involved -do you have good diy skills? Otherwise leave to a pro to tile it for you maybe you can buy the tiles and he lays them?
Q:why does ceramic tiles pop up?
Could be the humidity. What did he use to stick them down? Did he use a mastic that comes already mixed in a tub? If so, there will probably always be problems in a humid or wet areas. Thinset is best for tile.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range