Baked Tilapia Aluminum Foil

Hot Products

Unburned ASC Bricks For The Torpedo Cars Refractory Bricks for the Torpedo Cars

High Alumina Brick Hot Blast Stove with Low Creep Thermal Shock

High Alumina Alumina-Silicon Carbide-Carbon Refractories ASC Working Lining Bricks for Torpedo Car Iron Ladles

High Alumina Brick Hot Blast Stove with Low Creep Series

High Alumina Air Outlet Combination Brick for Hot Blast Furnace

High Alumina Brick for Steelmaking EAF

High Alumina Brick for EAF Rotary Kiln Al2O3≥75

Low Creep Checker Bricks Hot Blast Furnace Low Creep High Alumina Andalusite Checker Bricks

High Alumina Brick Ladle

High Alumina Blast Hearth Brick Corundum Composite Brick for Blast Furnace

FAQ

What should be used as binder for making high alumina bricks?

Bond for making high alumina brick: soft clay has good plasticity, so the high alumina brick is usually made of soft clay as bond. However, the free Al2O3 free SiO2 and bauxite clinker clay in under 1200 degrees occurred two times of Mullization reaction, generate large volume expansion, silicon porosity, strength reduction. Therefore, the amount of clay powder in the ingredient should be no more than 5%.

Application characteristics of high alumina brick

Thermal shock stability. In high alumina brick products, the stress concentration is due to differential expansion when the temperature of refractory brick changes. Therefore, the high aluminum brick products than clay brick products thermal shock stability is poor, general water temperature only 3 - 5 times.

How are the grades of high alumina bricks differentiated?

In China, the content of Al2O3 in high alumina brick is usually divided into three categories: I, etc. - Al2O3 content > 75%; II, etc. - Al2O3 content is 60 to 75%; III and so on - Al2O3 content is 48 ~ 60%.

What is the apparent porosity of high alumina brick?

In the production of high alumina bricks in addition to the entity, there are many different sizes and shapes of different pores, pores can be divided into three categories: one side closed the other side and the outside world is called open pores, closed in the product not communicated with the outside is called closed pores, penetrating through pores called the few products.

What's the difference between high alumina refractory bricks and high alumina refractory bricks?

The chemical pH value of high alumina refractory brick belongs to neutral and alkaline refractory brick, and clay refractory brick belongs to neutral and acid refractory brick.

How are the high alumina bricks fired?

Generally, the high alumina bauxite is added with a small amount of clay. After being ground, the gas is injected and shaped in the form of slurry by the way of gas attack or foam, and it is burnt at 1300~1500 DEG C. Sometimes industrial alumina can be used to replace part of bauxite clinker. Used for lining and thermal insulation of masonry kilns, as well as for areas where there is no high temperature, high melting material erosion and erosion effects. When touching the flame directly, the touch temperature shall not be higher than 1350 degrees.

Which thermal shock stability of clay brick and high alumina brick is good?

High alumina brick is made of superfine alumina, fused corundum and fused mullite as main refractory materials.

What is the high temperature limit of refractory bricks and refractory soil?

Fire clay -- usually refers to folk point stove furnace set with a kind of soil, limit under atmospheric pressure of 1500 degrees fire clay soil 1, properties and uses: clay brick of weak acid refractory material, its thermal stability is good, suitable for hot blast furnace, boiler and flue, smoke chamber lining, etc..2, product specifications form: standard shape, general, special-shaped and special-shaped brick. Physical and chemical properties of fireclay bricks.