WPC decking/WPC DIY decking Floor/WPC DIY flooring
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 2000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Main Features of the WPC Decking:
1. Recyclable, Eco-friendly, saving forest resources
2. With the look of the natural wood, but less timber problems
3. Moisture/water resistant, less rotten, proven under salt water condition
4. Barefoot friendly, anti-slip, less cracking, less warping
5. Requires no painting, no glue, low maintenance effort
6. Weather resistant, suitable from minus - 40 to 60 centigrade degree
7. Termites and insects resistant, and moldy-proof
8. Easy to install and clean
Specification of the WPC Decking:
component | 30%HDPE(Grade A Recycled HDPE) 60%bamboo/wood fiber component 10%chemical addatives New material capped outside |
Size | 140X20mm |
Design | Solid decking |
Length | 2.9m/pc standard length, also from your required |
Surface treament | original, sanded, brushed |
Color available | 5 regular colors for choice ( IPE,Walnut,graystone,Cedar,Rosewood) and we can adjust the new color according to the order requirement |
Cerfiticate | ISO9001, ISO14001, CE, FSC Certificate,"REACH"Test Reports by SGS; Intertek Test Report by ASTM standard..etc. |
Images of Co-extrusion WPC Decking:
FAQ of Co-extrusion WPC Decking :
1. Available Colours?
5 regular colors to choose ( IPE,Walnut,graystone,Cedar,Rosewood )
2. How to Install?
3.Treatment for Option
- Q: The slab can vary in depth from -1inch to 0inch over a 10 foot range.we tried self leveling concrete. some parts of our initial pour,when we just learning did not turn out so well. now there are small areas that are as much as +.75inches.Can we shave/grind the high spots down. Do you recommend that we grind these spots down before installing the flooring?
- If this is glue down installation, you need to grind and fill. This could take a professional 3-4 different coatings to get it exact. It is easier to fill than grind. I would error on the side of caution. If it is rolling, you may chase it around the room the first couple of times. If it is a floating floor I would do nearly the same thing, except it does not have to be quite as prefect. I would take a level, the longer the better and grid out the floor marking with a crayon marking highs and lows. Screed from high point to high point. Let it dry. Sand. Screed again. Keep repeating until you meet the specifications in the instructions for the flooring.
- Q: Can you make your own flooring?
- Of course, but their own shop will certainly have some flaws, the landlord can look at the old as the floor, the factory has a professional shop, and do not need any fees, but also the quality and quantity.
- Q: Solid wood composite floor moisture it?
- As long as the wood are not moisture-proof or short-term spill can not sprinkle for a long time do not clear the leak into the gap in the consequences that can be small can form a big hidden deformation of the wood is also the same business that moisture Are JB nonsense what the closure of the wax tube can not use the focus or their own maintenance of the other are nothing
- Q: What does the composite wood floor do?
- Composite wood flooring is a non-standard noun, in any national standards and normative data are not found in the word. Consumers claim that composite wood flooring generally refers to the strengthening of wood flooring (scientific name: impregnated paper laminated wooden floor). It is in the wood after crushing, filling glue, preservatives, additives, hot press high temperature and high pressure suppression treatment, so it broke the physical structure of logs, to overcome the poor stability of the logs. Composite floor of the high strength, uniform specifications, high wear resistance, corrosion, moth and decorative effect, and to overcome the surface of the wood scar, worm, color problems. Composite wood flooring without paint waxing, the use of a wide range, easy to care, is the most suitable for modern family life rhythm of the ground material. In addition, the composite floor of the wood use rate is high, is a good environmental materials.
- Q: I had a chemical spill on part of an engineered floor that I laid down a few months ago (the glued down type). Now I need to repair it, but have two problems:1. How do I do it, because there is a toungue and groov on every edge, so I cant figure out a way without removing half the floor (to the wall).2. I am having trouble getting up the old flooring because the glue sticks so well. They sell long-handled scrapers at the store, but I suspect that it wouldn't work at all. I have tried both a chisel and putty knife, but can only remove an inch every 10 minutes. A grinder with a grinding wheel causes lots of burning, and I risk damanging a nearby plank. Is there an easier/faster way?
- I set a circular saw to the depth of the board and cut a section out. Taping off surrounding boards w/ a painters tape so I dont cut to far since the sawdust will seem to hide the next board. Then with a chisel I chisel that piece out ..Very carefully!! Then chisel the tounge and groove section in toward the middle. Elbow grease and a sharp chisel and scraper are the only way to go.. then you ll have to cut off the tounge part by setting the blade just to the top of the tounge so you don t damage the edging.. Trial fit all boards, then glue down and you ll have to top nail and fill in nail holes.. If your on cement you ll have to put weights atop till the glue sets. It s a downfall of any glue downed floor but it s the only way sorry GL
- Q: Strengthen the composite floor is thin or good thick, and now the market has 8mm9mm10mm12mm, 12mm more
- This is to see personal preferences, the mainstream is 12mm and 8mm to strengthen the floor, 8mm a few years ago or the mainstream, foreigners are generally used this, and have their own installation diy, this board is thinner than 12mm, and the board is wide, Generally, there are 195mm, 196m, and the width of the board is more in line with the aesthetic habits of the people. The board is narrower than the 8mm. It is generally about 130mm wide and 12mm is popular in the country. Better, suitable for living room, bedroom and other places, the general small area of the room can shop 12mm, look a little bigger visual, shop 8mm wide board becomes space is small.
- Q: How about solid wood flooring?
- The name is good to listen to the individual recommended or imitation wood composite floor durable and beautiful economic rush cake Ka waterfall yellow leather withered joint PS: I am the installation of the floor
- Q: Solid wood composite flooring discoloration is what reason
- Wood light color reaction Wood color is mainly caused by the absorption of ultraviolet light, timber sapwood and heartwood to absorb ultraviolet light after the degree of discoloration, will lead to pavement after the floor to produce a certain color. Multi-layer parquet surface for the natural wood, with the natural properties of wood, resulting in light color is a normal phenomenon, not a product quality problems. China 's wood flooring prompted the majority of wood discoloration reaction 窢 籂 籂 dumpling 讵 讵 存 担 担 担 Long is deep and shallow, only a few wood is deep and shallow, in the same floor of the discoloration is basically the same.
- Q: What is the plastic floor? What is the composite floor?
- Plastic flooring generally refers to PVC flooring, as well as wood flooring. The floor has the material of the material, water resistance, generally suitable for public places. Composite floor, in a broad sense, refers to the structure by the layers of composite floor, such as: laminate flooring, multi-layer parquet, part of the bamboo flooring. As for the floor resistant to burning cigarettes, there are provisions of the national standard. PVC flooring, laminate flooring and other surface with aluminum oxide wear layer, more resistant to burning, the general bamboo, wood flooring surface is paint, not smoke cigarette burner.
- Q: What is this floor? Is it pure wood floor? Or composite floor?
- My house also has a composite floor
Send your message to us
WPC decking/WPC DIY decking Floor/WPC DIY flooring
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 2000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords