Q:Woodworking engraving machine cutting panels, how seamless stitching?

From the starting point, cut to the second 1600 nodes, press the pause, move the material, first make the tool point to the left node, set the origin of the workpiece, and put a clip in the upper left corner, so that the left will not move;

Q:How much is a computer woodworking engraving machine?

If only the general depth of the plane, concave convex sense can buy a laser engraving machine, the price is only three thousand or four thousand yuan on itIf you need to engrave high precision products such as reliefs, you need to use a dedicated engraving machine, the price of about thirty thousand yuan

Q:Woodworking engraving machine engraving stuff marks

If there is no problem with the machine assembly, that is, you have the wrong tool, increase the tool must be optimistic about the corresponding size, so that the error will be reduced

Q:What's the cutter setting method of woodworking engraving machine?

In engraving machining, the basic methods of tool setting are cutting method, tool setting, tool setting and automatic tool setting.

Q:How to deal with the dust of woodworking engraving machine?

With the development of woodworking and woodcarving industry, the application of woodworking engraving machine is more and more widespread. It is considered that a single manual operation has gradually turned to automatic work. However, in the woodworking engraving machine in the process of an important issue has been plagued by the engraving machine engraving machine manufacturers and users, in the process will produce a lot of dust, although the vast majority of woodworking engraving machine is equipped with a suction device, but it did not fundamentally solve the problem of dust, the dust generated carving machine portal is woodworking engraving machine to deal with the problem analysis:

Q:CNC computer woodworking engraving machine has several parts

Body part: the trunk part of a machine tool. Its main function is to provide a working platform. The material is divided into two parts: cast iron platform and cast aluminum platform. Cast iron platforms are expensive, but because the weight is too heavy, many manufacturers do not choose the platform with cast iron. And the platform made of cast aluminum is very light, and the intensity is large, and is chosen by many manufacturers. It is the leading product now.

Q:Woodworking engraving machine engraving 3D relief skills do you know?

The woodworking engraving machine automatically generates sequences of varying shades of engraving. Woodworking engraving machine produced this effect gives a strong three-dimensional feeling. In general, this kind of sculpture is done by sharp knives. Sometimes, because the area between the two lines of the pattern is large or the strokes are rough, the so-called "isolated island" will be produced.

Q:How much is the woodworking machine with four heads?

According to your needs, I recommend woodworking engraving machine, rotating axis, so that you can do plane engraving, you can also do three-dimensional sculpture!

Q:How to install the rotating shaft of woodworking engraving machine?

The axis of rotation is directly placed on the platform so that Longmen needs to be heightened, and the Z axis panel needs to be enlarged accordingly. The size of the platform will not be affected when the plane is carved. The rotating shaft can be put up at any moment and be taken down.

Q:How to judge the temperature of the stepper motor of woodworking engraving machine overheating?

The stepper motor is composed of an iron core and winding coils. The winding has a resistance, and when it is energized it produces a certain amount of heat. In fact, it is like a woodworking engraving machine spindle, the same motor, the temperature will continue to rise, but the spindle motor cooling water circulation to reduce the heat. But the stepper motor is no water cooling, then how to judge its temperature overheating question?.