Q:Wash basin basin faucet how to do, the handle joints leak

, Unplugged with a sealant seal to re-install

Q:Kitchen pots hot and cold faucet water hose connector how to unscrew? Nuts in the deeper position of the valve body, wrenches and stretch does not go, hand screw is not OK, too tight. Is the faucet with the hose connection joints, can only cut? Leading water leakage to change it. What tools are there?

First connect the hose and the angle valve with a wrench. And then move the handle in the direction of rotation, that is, to screw the direction of rotation, which is the faucet below the nut will be loose, holding a rag, into the pool below, touch the faucet nut, you under the nut. When the faucet will pull out the whole, and then I would not have to say it! The

Q:It slides around constantly. I can even lift it 3/4 inch upwards and see the pipes underneath in their little holes. I have felt under there with my fingers but I don't know what I'm feeling for to try and tighten it. What is the mechanism that tightens it to my sink, and how do I go about fixing it?

two screws, one on each knob. Untighten them, and take the knobs off. get a crescent wrench, and tighten the brass nuts under neath where the knobs were. If that didn't get it, you have to go under the sink and take a look, and jus tstart tightening everything

Q:What is the price of the basin faucet?

304 stainless steel to do the price of copper with almost the same. Zinc alloy to do a lot cheaper, dozens of pieces have, with a period of time will be off the skin.

Q:Is it necessary to use a corner valve below the basin faucet? What is the role?

Home use, do not install the angle valve, the faucet is broken, the direct closure of the water inlet valve is also possible, but may be more or less have a certain impact.

Q:Xin Si Lai faucet wash basin with a little more on the faucet

Dozens of pieces to more than two hundred wash basin faucet a lot, do not have to choose which brand.

Q:Toilet double hole basin is the number of holes

Do not worry, the standard size is two holes from the center of 102MM can certainly be loaded up, if your faucet has not bought, it is recommended to pay a single hole basin, faucet also buy a single hole single hot and cold faucet, so look good, please refer to

Q:Basin faucet size how much more appropriate?

If it is on the stage pots, choose wall-mounted faucet or high basin basin faucet, if it is under the basin, the basin faucet selection on the flexible little, short feet, tall, wall-style can choose

Q:Does the bathroom wash basin faucet need to install the angle valve?

And where the water pipe home has a valve control. I think the use of angle valve is not useful.

Q:Hansgrohe basin basin with what basin

, According to the material to points, can be divided into SUS304 stainless steel, cast iron, plastic, copper, alloy material faucet, polymer composite tap and other categories.