Truck-mounted Drilling Rig for construction and buliding
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 100 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Truck-mounted Drilling Rig
SMJ series truck-mounted drilling rig is a kind of machine which mount the hydraulic head driven rotary head drilling rig to a truck chassis. It can be compressed air drilling, foam drilling or mud drilling. It is with the characteristics such as good mobility, high efficiency, good quality, low pollution, etc. It can be used to drill holes for gas extraction, shallow oil or hydro-construction as well as mine rescue drilling construction.
1) High drilling efficiency, the average drilling speed is up to 20m / h
2) It can be used to drill vertical wells, horizontal wells, cluster wells, and branch wells.
3) Good mobility, can reach the working site quickly.
4) Low requirement for the working conditions, can start operation quickly.
5) Can drill with compressed air, foam, or mud pump
6) Big hoisting capacity, it is up to 1000kN, the max. torque is up to 25kN.m.
7) The rotary head can tilt, can change the drilling rod easily.
Type | SMJ5510TZJ15/800Y | SMJ5540TZJ25/1000Y | ||||
Truck chasis from SANJIAN SPACE ESTATE | Model | WS5545 | ||||
Driving mode | 10×6 | |||||
Gear shifts | 9drive,1reverse | |||||
Max.speed | 70km/h | |||||
Engine power | 276kw/2200r/min | |||||
Weight | 17550kg | |||||
Max.hoisting force | 800kN | 1000kN | ||||
Max.feeding force | 180kN | |||||
Rapid hoisting speed | 30m/min | |||||
Rapid lowering speed | 59m/min | 60m/min | ||||
Slow feeding speed | 7.1m/min | 6m/min | ||||
Rotary head | Max.output torque | 15kN.m | 25kN.m | |||
Output speed | 0-150r/min | 0-90 、0-180r/min | ||||
Mainshaft dia. | Φ76mm | |||||
Stroke | 15m | 14m | ||||
Drilling depth | Standard drilling rod model | Φ114 | ||||
Rotating drilling | 1500m | 2000m | ||||
Max.hole dia. | Φ711mm | Φ770mm | ||||
Combined pumps of hydraulic system | 32MPa4+4+1 | 32Mpa3+3+3+1 | ||||
Compressed air/mud lines | Dia. | Φ76.2mm | ||||
Nominal working pressure | 20MPa | |||||
Auxilary winch | Jib boom stroke | 1m | ||||
Hoisting weight(retracted) | 38kN | |||||
Hoisting weight(extended) | 20kN | |||||
Hydraulic system pressure | Rotary head rotating system | 25MPa | ||||
Normal drilling system | 24MPa | |||||
Fast hoisting system | 32MPa | |||||
Rig engine from CUMMINS | Model | QSX15-600 | ||||
Power | 447kW | |||||
Speed | 2100r/min | |||||
Total weight | 51000kg | 54000kg | ||||
Dimensions(Transportation) L×W×H | 13.7×2.85×4.19m | 14.28×2.85×4.2m | ||||
Air compressor from Sullair of U.S.A. | Model | 1150XHH/1350XH(A) | ||||
Flow | 32/38m3/min | |||||
Discharge pressure | 3.45/2.4MPa | |||||
Engine from CATERPILLAR | C18ATAAC | |||||
Nominal input power | 470kW | |||||
Dimensions(transportation) L×W×H | 4613×2184×2278mm | |||||
Weight | 5897kg |
- Q:What are the appliances cleaning equipment
- A steam engine, a steam engine Air conditioning cleaning machine Water heater cleaning machine Water cooler Multi-function sterilizer Geothermal cleaning machine Also not commonly used: suction blower, the hotel oil and smoke machine washing machine, washing machine ultrasonic cleaning machine, keyboard washing machine and so on
- Q:How to keep the equipment clean
- The equipment needs to protect the electric motor circuit and the structure that need to adjust often is good! ~
- Q:It is best to wash mechanical equipment using that cleaner
- In addition to cleaning and cleaning, the mechanical cleaning agent must be in four defense: anti-corrosion, rust prevention, anti-pollution and fire prevention. Because of mechanical and electrical direct relation, inevitable result can cause spark to cause needless disaster! So you need to consider buying products that are volatile, undiluted, and gasoline
- Q:What are the cleaning facilities for the hotel?
- Hotel cleaning tools mainly dry off dust, mop/broom, trash, shovel, cleaning brush, pushing water scraping, telescopic rod, clean glass suits, spray bottle, safety rope, dust bag and so on. Again, we need to know some of the right ways to make a hotel clean. First, the items of different materials should take the corresponding hotel cleaning products for cleaning and maintenance. For example, if be glass ornament, should choose glass cleaner and glass cleanness tool; Stainless steel accessories, stainless steel maintenance agent; Wooden furniture, adorn article should choose the cleanness such as the household candle and so on. Moreover, the inside of the room health including bath crock, toilet, wash basin, cup, bed top grade, and so on, these equipment and facilities come into direct contact with the guest, must insist on a day after the guest use, cleaning, disinfection, replacement and maintenance, this will make the guest used more and more feel at ease.
- Q:Where can I buy cleaning equipment
- Taobao, ali has a lot of, but the preparation factory actually is a few, the basic of taobao is the trafficker... If you haven't done it, try not to buy it, the depth of the device, it's too easy to get into a pit, find a physical store to practice, and see what they're using to buy the best
- Q:What is the issue of cleaning equipment? Is there a difference between industrial cleaning equipment and common equipment?
- The highest rated working pressure of the industrial high pressure cleaning machine is much higher than the highest rated working pressure of the commercial high pressure cleaning machine. 2: under the same technical parameters (pressure flow), industrial high pressure cleaner can effectively continuously working time is more than commercial grade high pressure cleaner can effective working hours continuously. 3: under the same technical parameters (pressure flow), industrial high pressure cleaner of the pump head and the whole machine volume is greater than that of commercial grade high pressure cleaner pump head and engine volume. 4: under the same technical parameters (pressure flow), the value of industrial high pressure cleaner and service life is far greater than the value of commercial grade high pressure cleaner and service life. The pump head material of the industrial high pressure cleaning machine must be made of alloy steel, and the pump head of the commercial class high pressure cleaning machine usually USES copper or aluminum. Generally, the price is determined by several parameters. After all, it is more complicated, considering your needs and consulting the manufacturers. The company used in the previous company is the washing equipment made by chengdu power feng, the pre-sale and after-sale service is very good, you can also consult.
- Q:How many kinds of cleaning equipment are there for cleaning companies?
- There are a lot of! Automatic washing machine, suction water machine, high pressure cleaning machine, sweeping machine, polishing machine! Wait a minute! That's about 30,000 yuan! OK!
- Q:What should I consider? To solve the
- Cleaning equipment at present, a lot of international medical devices by using ion exchange, reverse osmosis and ion exchange group legal and reverse osmosis and EDI combination preparation of medical apparatus and instruments clean water, the water treatment equipment manufacturers aimed at the development of medical cleaning equipment market space, are put into research and development industry. According to the process of the preparation of ultra-pure water, there must be an advantage in the development of devices.
- Q:How do you clean the household central air conditioner
- It is mainly the filtration grid that is cleaning outlet, if can ask professional person to clean the wind channel is better
- Q:What are the sanitation facilities?
- There are many kinds of clean sanitation equipment, general sanitation cleaning equipment to sweep the floor clean, high pressure cleaning is given priority to, the driving type is sweeping machine was used to replace the manual cleaning equipment, high pressure cleaning machine can finish the stubborn stains such as the ground oil clean.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Truck-mounted Drilling Rig for construction and buliding
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 100 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products