Q:What problems should we pay attention to when buying a tent? Ordinary camping tent

You have to make sure you want to buy that kind of tent with mountain tents and recreational mountain account account, pay attention to the temperature of water (usually 10000MM) above waterproof better is to lock the constant temperature of 18 degrees the price of more than 4000, leisure account to the left and right 3000MM waterproof breathable and some can be a price there are 1999-3000

Q:Is the tent a double deck? Is it a single layer?

The so-called function: breathable, waterproof, high mountain tent, three season tent, with the snow and so on;Parameters: weight, waterproof value, etc.;The price is more or less the same, mostly depending on the brand and parameters.

Q:Which is the best for the tent mat, the aluminum film and the aluminum free film?

Look at your location, if you use the site and more humid, cold to suggest PVC, moisture-proof pad, wave or washboard on the line, can have the effect of moisture and cold, if only use the local park, cement, recommend the use of aluminum film moisture-proof pad on the line, aluminum film there are a few tips mat Oh, last bought aluminum moisture-proof pad Himalaya outdoor, only 10 a few dollars out, except as a cushion, a reflector can be photographed with a waterproof pad pad, very interesting

Q:Can you put up tents on top of Mount Huangshan? Can tents come with you?

Hello, on the top of the Mount Huangshan is a tent, Mount Huangshan mountain tent camping site is the best hotel in Beihai in front of the basketball court, the site, the ground formation, is next to the police station, from the public toilets are also very close. In addition, in this hotel, Baiyun Hotel, bright top floor are the ideal place to set up tents.

Q:What are the tent accessories?

Tent accessories including camp column, tent pole camp (also known as nail nail), and the deputy battalion main rope, rope, rope side and auxiliary tent, tent camp hammer, bags, tents, tents and lights around the moisture-proof pad (ordinary sponge foam cushion, cushion, cushion, aluminum film) and sleeping bags and other equipment.

Q:What are the properties of military tents?

Good concealment performance, here is not only the light hidden cover, and infrared and electromagnetic wave shielding effect, can effectively resist the electronic reconnaissance and infrared detection areas, is conducive to their survival.

Q:Do we need cushions under the tent? What kind of cushion should be used?

But in special weather and environment, can also be installed in the tent pad below; the moisture-proof pad above two friends said, is used in the tent as mat or mattress, especially since the moisture-proof pad inflatable, can strengthen moistureproof, warm and increase comfort;

Q:How are the tents cleaned?

The bottom end of the PE with a damp cloth to wipe it, most people think that PE bottom is not good, because there is something like a snakeskin bag, in fact, most foreign tents are using this material, and than the average Oxford bottom material will be more expensive, moisture-proof performance is also good, wear, casual tents generally preferred, of course and if you are a backpacker, considering the weight of a tent, aluminium bar, Oxford at the end of the tent is necessary, but we must remember that with moisture-proof pad oh.

Q:What if the inflatable tent leaks?

Tools needed: air column fabric, special glue for manufacturer. If the leak point is a very small hole, can use a small piece of cloth (jattu gas column Zhuo any specifications of the inflatable tent there are standard), then brush the glue dry after dispensing, to be affixed to the leak, tight bonding. If the leakage of gas column joints for sealing plastic, can be divided into the following steps:First, clean the bonding surface first.Two, the inflatable tents will be given a bottle of glue, inflatable tent column special glue, brush it on the surface of the pre bonding surface, and must be painted evenly, the thickness is appropriate, brush two times, you can glue.Three, sticky interface shape must be designed as round or oval, as far as possible avoid square and sharp angle interface shape, lap width shall not be less than 30mm.Four. When the glue has been volatilized, it can be bonded. The patch shall be flat, free of wrinkles, rolled and scraped. At the same time, the hair dryer is supplied with heat source to facilitate bonding. 6 hours after bonding, it can be inflated. (Note: glue and air column can not fill the leak. The glue must be dried before it can be adhered. The time is about 10-20 minutes.)

Q:How to install outdoor tent?

Different kinds of tents are different. Let me talk about how to build an ordinary tent.First select the camp, the tent in the account flat to the ground (usually in the account, but also some put up to hang outside the account in the account, such as the camppal brand (used in drilling, there are stores in WAL-MART), the principle is to put the curtain rods the folding of the curtain rod, take out a steadily straightened, connected into a long rod, follow the instructions on that wear into the tent pole sleeve, a common tent is cross method.