Roving Fiberglass e-glass woven roving-600gsm
- Ref Price:
-
$1.02 - 1.06
/ kg
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Products Description
1.E glass woven roving 600gsm,1000mm width can be used for manufacturing all kinds of FRP products,which made by direct rovings in plain weave pattern.
2.Compatible with unsaturated polyester,vinylresin ,epoxy resin.
Characteristics
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3.Uniform tension,high dimensional stability and making handing easy.
4.Good mechanical properties and high strength of parts.
Technical Specification
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | ISO3374 | 600+/-5% | 602 | yes | ||
WIDTH (MM) | ISO5025 | 1000±20MM | 1000 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | ISO4602 | 25±2 | 25 | yes | |
WEFT | ISO4602 | 25±2 | 24 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | ISO4606 | ≥4000 | 4015 | yes | |
WEFT | ISO4606 | ≥4000 | 4015 | YES | ||
moisture CONTENT (%) | ISO3344 | <=0.15 | 0.1 | yes | ||
WARP ROVING(TEX) | 1200 | 1200 | YES | |||
WEFT ROVING(tex) | 1200 | 1200 | YES | |||
LOSS ON IGNITION (%) | ISO1887 | 0.4-0.8 | 0.5 | yes | ||
FAQ
Package:Eech roll is packed by polyester bag,and then put into a cardboard box or plastic wowen bag.The weight of each roll is between 20 to 85 Kg, The rolls are to be horizontally placed and could be in bulk or on pallet.
Storage:Optimum storage conditions are between the temperature of 5～35℃ and with the humidity between 35%～65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q: Materials of european component
- Polymer:.5%, the low alkalinity sulphoaluminate cement, forming perfectly, do not use additives which contain calcium chloride based. 2. It is anti-permeability. As the Portland cement, it can be formed at one time. 4, China requires that when using the ordinary portland cement, the zirconia's content do not less than 16, including alkali resistant glass fiber roving, white portland cement..5%:. 3. plasticizer: The fibers used in GRC must be alkali resistant glass fiber, fiber, early strength agent, alkali resistant glass fiber mesh and retarder. As the requirement of Europe and America, the content of zirconium oxide in glass fiber should be no less than 16: The acrylic emulsion is usually the polymer: We can add some of the volcanic ash active material selectively, that is, acrylic copolymerized emulsion. 5: We can select soft rubber mold, made by high temperature resin which suit the hard outer mold: High efficiency water and anti freezing agents reducing agent can be selectively added. That is conducive to comprehensive performance, enhance the durability of GRC products commonly. The cement can be hardening at fast speed. Sulphoaluminate cement /additives, alkali resistant glass fiber chopped yarn is easy demoulding.
- Q: How to make the lining of tank acid-proof and anticorrosion.
- If it is metal can, cleaning, descaling and brushing anticorrosion lacquer will be fine.
- Q: What are the components of the GRC cement component?
- The thermal insulation properties are so good that they can pass through the bricks with its thickness over 570mm, alkali resistant glass fiber chopped yarn,150 tons discharge valve and so on. Bulk cement silo is a cylindrical structure, welded by guardrail and pressure relief valve. The bottom is composed of four supporting legs for sustaining the whole silo. Cement component use lightweight foam concrete thermal insulation board so that they don't need to build external wall foam insulation layer.Cement component is composed of dust catcher and high and low material level meter with 100 tons and 500 tons specifications. The experimental results shows that the house with the use of this product can greatly reduce the heating and cooling power. Bulk cement silo meets industry standards.
- Q: Situation of nonwoven materials.
- A fiber as main ingredient in nonwoven adhesive bonded materials. Needle punched nonwoven materials, Spunlaced Nonwovens Materials, spunlaid nonwovens method, fiber mesh constitute the main body of nonwoven materials, fiber in Nonwovens in these accounted for more than half or even one hundred percent. Fiber as a component of nonwovens fiber tangles in acupuncture Nonwovens Materials, Spunlaced Nonwovens Material and no yarn stitch bonding nonwoven material, part of fiber like buddle structure and coil web fibers to reinforce the fiber web. Three, fiber as the adhesive components of Nonwovens in most thermal bonded nonwovens, hot melt fiber into web in thermal bonding when all or part of melting, forming a hot melt adhesive composition in Web reinforcement.
- Q: What are the causes and methods of glass fiber surface treatment?
- Heat - chemical treatment: first, the glass fiber textile products will be emulsified by paraffin wax and then be treated with surface treatment agent (mainly used for twisting textiles).
- Q: Where is atmospheric toxic liquid containers and how to operate it ?
- Color should be in accordance with the provisions in table 3 and it is not easy to fall off. Firstly, the surface of tube should be painted with soapy water or totally soaked in water. Rubber products should features with corrosion resistance and oil resistance. It should process liquid injection port sealing test.The technology file includes the following. Tank manhole and liquid injection port and strength layer can use resin with corrosion resistant as base material. When tank is out of factory, its surface hardness value should over 34. The defination of automotive paint coating. This standard uses the following definitions. It is in accordance with the JT with the minimum wall thickness is 5mm. Its head should adopt elliptic type head. The application of nitrogen should be adopted and it should be located at the right side of tank. The resin content should be controlled within 30% ~ 35% with the intake valve should be closed. A horizontal wavy plate should be installed. The test should be processed on a dedicated vent valve. Tank mark. A ring paint belt presenting transport liquid should be sprayed around the center line of the tank. Name of manufacturer. According to the method used in test 5, the outer surface should be smooth and oxygen content should between18% and 23% (volume ratio). Elliptical tank cross-section axial ratio is not greater than 2.12. The tank has vehicle safety requirements. The tank has not been thoroughly cleaned with its width is not less than 350mm. It is enduring dilute acid base rubber hose.
- Q: Production process of glass fiber reinforced plastic
- Simple glass reinforced plastics are melted together again
- Q: How to deal with the folding force of glass fiber plastic coated yarn.
- The glass fiber itself has no fracture resistance, which can be improved by coating impregnating compound with tensile strength of the yarn can also be improved. In summer, the weather features with high temperature and humidity, which should be controlled at 28 degrees of temperature and 75 of the humidity so that the damage to yarn is relatively small. You may consider to improve the toughness of the coating material.
Send your message to us
Roving Fiberglass e-glass woven roving-600gsm
- Ref Price:
-
$1.02 - 1.06
/ kg
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
