Refractory Brike Insulating Fire Brick for Heating Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Refractory Brike Insulating Fire Brick for Heating Furnace
Description:
The products have passed the ISO international certified, are made of high pure material, fired at high temperature by advanced technology, with the advantages of high strength, high compression resistance, good thermal shock resistance, good performance in high temperature, good thermal conductivity, good erosion resistance and so on. Widely be used for linings of furnace in industries.
Item | Type 1500 | Type 1550 | Type 1600 |
Max, service temperature | 1500 | 1550 | 1600 |
Al2O3 % | ≥70 | ≥80 | ≥85 |
SiO2 % | ≤28 | ≤18 | ≤13 |
Fe2O3 % | ≤0.5 | ≤0.5 | ≤0.3 |
Bulk density(g/cm3) | 1.3-1.5 | 1.4-1.7 | 1.6-1.8 |
Reheating linear change % (1600°C *3h) | ±0.5 | ±0.5 | ±0.3 |
CCS(Mpa) | ≥8 | ≥8 | ≥10 |
Refractoriness under load °C (0.1Mpa,0.6%) | ≥1500 | ≥1550 | ≥1600 |
Thermal Conductivity w/(m.k) Average 800 °C | ≤0.6 | ≤0.7 | ≤0.5 |
Application | Primarily used for lining of the shuttle kiln for calcining refractory material, industrial ceramics and domestic ceramics, and the bricks for the high temperature zone of tunnel kiln, and insulation brick for high-temperature furnace. | ||
Remark | The standards for highest used temperature are oxidizing atmosphere and intermittent furnace. | ||
Feature:
1.High compression strength.
2.Top high-temperature capability.
3.Excellent thermal stability.
4.Low thermal conductivity.
5.Powerful penetrating-proof capability.
6.Good erosion-resistance.
7.Long service life.
Application:
Refracory brick plant can be in direct contact with the flame,this insulating brick can be used as linings or as thermal preservation layers in various industrial furnaces and kilns in metallurgical industry, ceramic industry, chemical industry, machinery industry.
such as blast furnace, hot blast stoves ,electric arc furnace, cement kiln,melting furnace, ignition furnace, flue, refining equipment, heating equipment and piping, regeneration device, gas furnace, soaking furnace, annealing furnace, heat reaction chamber and other thermal industrial equipment.
FAQ
1. Do you provide samples?
Yes, samples are free. Guarantee samples quality same as mass production quality.
2. What's the MOQ of trial order?
No limit,We can offer the best suggestions and solutions according to your condition.
3. Can we visit your company?
Of course,welcome at any time,seeing is believing.
4. Do you accept OEM?
Yes, we can do OEM.
5. What are the payment terms?
Usually T/T, D/A, D/P, L/C, Western Union ,others could be discussed .
6. How long is delivery time?
The delivery time will be determined according to the quantity of the order.
7. How are your products’ quality?
More than 20 years of production experience. The products will be strictly inspected before shipment, so the quality could be guaranteed.
8. How to slove the quality problems?
If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
9. What is the service life of your bricks?
The service life of different bricks is unlike.It also depends on your using condition and method.
10. How about your company's certification?
ISO9001 and Test Report,also we could apply other necessary certification.
11. How about your price?
Quality will be guaranteed. Competitive prices based on same quality.
- Q: What are the high aluminum bricks made of?
- We specialize in the production of various LeiBao refractory refractory material, such as corundum, zirconia products, alumina hollow ball products, mullite products and so on.
- Q: What are the grades of high alumina bricks?
- High alumina brick according to the aluminum content is generally divided into: super high alumina brick, a high aluminum brick, two high alumina brick, three high alumina brick
- Q: What refractory material does cupola lining use?
- A class of inorganic nonmetallic materials with a refractoriness of not less than 1580 degrees. Refractoriness is defined as the temperature of a sample of a refractory cone sample that resists high temperature without loading and does not soften and melt down. But only in terms of fire resistance can not be fully described refractories, 1580 degrees of temperature is not absolute.
- Q: What's the difference between high alumina refractory bricks and high alumina refractory bricks?
- The chemical pH value of high alumina refractory brick belongs to neutral and alkaline refractory brick, and clay refractory brick belongs to neutral and acid refractory brick.
- Q: What is the density of a super high alumina brick and what is the price?
- Super high alumina brick, alumina content of 80% bricks, bulk density of 2.7g/cm3 or more, the factory price of about 1900 yuan
- Q: Difference between low creep high alumina brick and ordinary high alumina brick
- The emphasis is on the physical and chemical indexes of low creep and high alumina bricks. The physical and chemical indexes of the high alumina bricks are different, too. They are DRL-1550And LZ-75 perform GB GB/T2988-2012
- Q: What are the alloy wear resistance materials?
- KNMn19Cr2 (patent) high manganese alloy (ZGMn13Cr2MoRe), super high manganese alloy (ZGMn18Cr2MoRe); two: anti-wear chromium cast iron series: such as high, medium and low chromium alloy cast iron (Cr15MOZCu); three: wear resistant alloy steel series: such as, low and high carbon multi metal combined steel (such as ZG40SiMnCrMO and ZG35Cr2MoNiRe); four: ADI (ADI) series; five: all kinds of composite or gradient material and hard alloy materials, nano KN alloy (patent product): such as chromium carbide composite (Cr2C3+Q235), high-energy ion osmosized tungsten carbide materials (WCSP), high toughness of cemented carbide (YK25.6), KN999 nano alloy (Beijing Naimo patent) etc.;
- Q: The difference between ordinary and diatomite brick refractory brick
- Insulation products made from diatomaceous brick and porous diatomite. The main raw material is natural porous diatomite, and then a small amount of clay and fuel are added. The volume density of diatomite brick was 0.7g/cm3, compressive strength at room temperature is 1 ~ 2MPa, the coefficient of thermal conductivity at 400 C for 0.13 ~ 0.20W/ (M - K), the apparent porosity is greater than 70%, the coefficient of thermal expansion (1280 degrees) 0.9 x 10 - 6 DEG -1, refractoriness is greater than 1250 DEG C. Mainly used in industrial kilns and other thermal equipment, thermal pipes insulation materials, generally withstand the hot surface temperature of about 1000 degrees celsius. Mainly used in industrial kilns and other thermal equipment, thermal pipes insulation materials, generally withstand the hot surface temperature of about 1000 degrees celsius.
- Q: How does the physicochemical index change when the high alumina brick is used at high temperature?
- When the high alumina brick is used at high temperature, the physical and chemical indexes and other constants will not change if the temperature is in the physical and chemical indexes and the softening temperature of the load.
- Q: What should be used as binder for making high alumina bricks?
- Bond for making high alumina brick: soft clay has good plasticity, so the high alumina brick is usually made of soft clay as bond. However, the free Al2O3 free SiO2 and bauxite clinker clay in under 1200 degrees occurred two times of Mullization reaction, generate large volume expansion, silicon porosity, strength reduction. Therefore, the amount of clay powder in the ingredient should be no more than 5%.
Send your message to us
Refractory Brike Insulating Fire Brick for Heating Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
