PVC Pipe GBWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Are plastic tubes resistant to UV light?
- Yes, plastic tubes can be resistant to UV light depending on the type of plastic they are made from. Some plastics, such as PVC and acrylic, are more resistant to UV light and are commonly used for outdoor applications. However, other plastics, like polyethylene, can be more susceptible to UV degradation and may require additional UV stabilizers or coatings to enhance their resistance.
- Q:Can mercury be stored in a hard plastic test tube?
- If it can b stored in a thermometer, it can be stored in a test tube. You should seal it though
- Q:Our side-by-side, outside water and ice collector barely lets the water come out. We have plenty of ice because it usually never used. We did notice that the plastic tubing inside the refrigerator, is wrapped many, many times in a fairly large circle, plus, there is a kink in the tubing several inches before it disappears inside of the back of the refrigerator.Should I get rid of this extra, extra tubing, along with the kink? How many feet of this tubing should be inside the fridge?Thanks to all that answer.
- ours is rolled in the same position except there is no kink i just went and checked maybe thats why it dont come out good or maybe you have hard water and its clogged hope this helps you
- Q:My bridge had broken and I got someone to make me a new one, but when I reviewed it over, I noticed they moved the plastic tube to the bottom of the violin. Should I not worry about it or have someone fix it?
- Does the bridge have a protective cover glued to it under the string - it's called a parchment? Or does the bridge have an insert in it, usually made from Ebony? If either of these is a yes, you don't need the tube. If the answer was no to both, the tube should probably be there to protect the bridge from the string cutting in. Here is a pic of the two possibilities I've mentioned.
- Q:Im making moonshine but not for drinking for fuel. I know that its a bad idea to distill with plastic if your gonna drink it but will it be ok for fuel?
- Yeah, that's fine.
- Q:Do plastic tubes have any limitations in terms of gas permeability?
- Yes, plastic tubes do have limitations in terms of gas permeability. While some plastics have low gas permeability, others may allow certain gases to pass through. The permeability depends on the type and quality of plastic used. Therefore, it is important to consider the specific application and requirements when selecting plastic tubes for gas containment.
- Q:Are plastic tubes resistant to bending fatigue?
- No, plastic tubes are not typically resistant to bending fatigue.
- Q:What are the advantages of using plastic tubes in the electronic packaging industry?
- There are several advantages of using plastic tubes in the electronic packaging industry. Firstly, plastic tubes are lightweight, which makes them easy to handle and transport, reducing shipping costs. Secondly, plastic tubes provide excellent protection against moisture, dust, and other contaminants, ensuring the safety and longevity of electronic components. Additionally, plastic tubes are customizable, allowing for various sizes and shapes to accommodate different electronic devices. Lastly, plastic tubes are cost-effective compared to other packaging materials, making them a cost-efficient option for the electronic packaging industry.
- Q:What are the advantages of using plastic tubes in the pharmaceutical industry?
- There are several advantages of using plastic tubes in the pharmaceutical industry. Firstly, plastic tubes provide a high level of hygiene and safety as they are non-reactive and do not interact with the contents of the tube, ensuring the purity and integrity of the pharmaceutical products. Secondly, plastic tubes are lightweight and highly portable, making them ideal for transportation and distribution of pharmaceutical products. Additionally, plastic tubes are cost-effective compared to other materials, allowing for efficient production and lower manufacturing costs. Lastly, plastic tubes offer versatility in terms of size, shape, and functionality, enabling customization to meet specific pharmaceutical packaging requirements.
- Q:Can plastic tubes be used for construction purposes?
- Yes, plastic tubes can be used for construction purposes. They are commonly used for applications such as plumbing, electrical conduit, and drainage systems. Plastic tubes are lightweight, durable, and resistant to corrosion, making them suitable for various construction projects.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pipe GBWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords