PVC Pipe 1.6MPaWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1 m
Supply Capability:
9999 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Specifications

pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.

2.Properties of pvc pipes:

1) Material: pvc pipe unplasticized polyvinyl chloride

2) Standard: GB, ISO9001, ISO14001

3) Color: white  pvc pipe, grey  pvc pipe , etc.

4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55

5) Vicat Softening Temperature, (C)  >=79

6) Longitudinal Reversion, %, 150(C) <=5

7) Dichloromethane Resistance Test: No attack

8) Falling Weight Impact Test, TIR, %, 0(C) <=10

9) Tensile Yield Strength, Mpa >=40

10) Fitness of Water Tightness Test: No Leakage

11) Fitness of Air Tightness Test: No Leakage

3.Features of pvc pipes : 


1)  Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2)  Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.

4.Application of pvc pipes:

1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture

5.Specifications of the pvc pipe:

Outer Diameter (mm)

Wall thickness(mm)

2.5MPA

2.0MPA

1.6MPA

1.25MPA

1.0MPA

0.8MPA

0.63MPA

φ20

20*2.3

20*2.0

φ25

25*2.8

25*2.3

25*2.0

Φ32

32*3.6

32*2.9

32*2.4

32*2.0

Φ40

40*4.5

40*3.7

40*3.0

40*2.4

40*2.0

Φ50

50*5.6

50*4.6

50*3.7

50*3.0

50*2.4

50*2.0

Φ63

63*7.1

63*5.8

63*4.7

63*3.8

63*3.0

63*2.5

63*2.0

Φ75

75*8.4

75*6.9

75*5.6

75*4.5

75*3.6

75*2.9

75*2.3

Φ90

90*10.1

90*8.2

90*6.7

90*5.4

90*4.3

90*3.5

90*2.8

Φ110

110*10.0

110*8.1

110*6.6

110*5.3

110*4.2

110*3.4

110*2.7

Φ125

125*11.4

125*9.2

125*7.4

125*6.0

125*4.8

125*3.9

125*3.1

Φ140

140*12.7

140*10.3

140*8.3

140*6.7

140*5.4

140*4.3

140*3.5

Φ160

160*14.6

160*11.8

160*9.5

160*7.7

160*6.2

160*4.9

160*4.0

Φ180

180*16.4

180*13.3

180*10.7

180*8.6

180*6.9

180*5.5

180*4.4

Φ200

200*18.2

200*14.7

200*11.9

200*9.6

200*7.7

200*6.2

200*4.9

Φ250

250*11.9

250*9.6

250*7.7

250*6.2

Φ315

315*15.0

315*12.1

315*9.7

315*7.7

Φ400

400*19.6

400*15.3

400*12.3

400*9.8

 

6.FAQ

 

Q:What is you MOQ?

A:As customer’s request.

Q:What is the production ability? or delivery time?

A:Our production ability support 40HQ order finish in one week. 

Q:What is the regular shipping port?

A:Tianjin or Shanghai. 

Q:What is your payment?

A:TT or CC. 

Q:Can we have sample?

A:Sample free, freight cost you. 

Q:For urgently doubts,who online?

A:Sales and marketing Manager 24hours online service.

 

PVC Pipe   1.6MPaWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB

PVC Pipe   1.6MPaWall thickness:1.6mm-26.7mm Specification: 16-630mm Length: 5.8/11.8M Standard: GB

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Clear plastic flexible tubing?? URGENT!!!! ?
No only use proper gas line it's not that expensive at all just go to your local auto parts store they should be able to cut you some off a roll they usually have a few sizes in the store you can even only buy a couple of feet of hose it's not that expensive and it's designed to handle gasoline.
Q:Reinforced plastic pipe is high density polyethylene PE pipe to enhance it
This is not necessarily.The plastic pipe has many kinds, such as PE, PP pipe, PVC pipe, glass pipe and so on, there are many methods to enhance
Q:How to get water to drain from a pitcher with a tube?
Siphoning. Suck on the free end until it flows to your mouth, stick your thumb over it and lower it to the floor and let go.
Q:i connected a plastic tube about 7 or 8 inchs long onto a butane can im wonderin if when i push down on the c?
Sure can, even if you've posted this in the wrong category. Funny thing about fire... it likes to burn as long as possible so if the flame makes it's way into the tube... you should duck. Don't be foolish, keep your hands, fingers, eyebrows, etc and quit playing with fire.
Q:what does the 1/4 plastic tube running from the cold water tap into the cement floor in the basement do?
could be a trap primer. If you have a floor drain in the basement floor, this line trickles water into the trap under it so it wont dry out, keeping the sewer gasses in check. If no floor drain then I dont know either!
Q:When the concrete is poured into the concrete, the formwork is lined with white tubes. What is that for?
Early wall bolt not used in casing, after the completion of concrete pouring in concrete wall bolt, the bolt ends exposed on the outside part of the concrete cut off, it directly resulted in the increase of cost. In recent years, in order to save the construction cost, so that the wall bolt can turnover, PVC plastic pipe for the bolt rope and then placed in the corresponding position within the template, after pouring concrete and reaches a certain intensity, can be pumped out by bolt.
Q:Need ends to seal 3/8 plastic tube like Dremel uses to seal the ends of the tubes their...?
1 piece of heat-shrink tubing to insulate your solder connection between EL wire and stereo wire (RadioShack) 1/2 6x32 clear polycarbonate screw to hold end bushing in (this is a recent addition, because the end bushings have come out of some of my blades when they are dueled with. However, these are rather expensive, as screws go. I think I payed about $10 for 50 screws.) hot glue, or silicone for end of blade super glue to glue in top and bottom bushings Note: I don't really like RadioShack all that much. I have a much better electronics store locally that I use that has a better selection and cheaper prices, but you can't order from them online, so I know you should be able to find what you need at RadioShack) That's just for the blade.
Q:Can duct tape be used to fix flexible plastic tubing?
I have used duct tape to seal a TIRE, but never a tube. I am not much for patching my high pressure tubes because of the balance issues. I never hit the road without 2 extra tubes in my seat pack. I do carry a small patch fit, but I use those to seal the inner casing of the tire. I should own stock in one of those tube factories, for I buy new tubes by the half dozen.
Q:What is a socket connection?
The spigot and spigot are divided into two kinds: rigid bearing socket connection and flexible bearing inserting type. Rigid socket connection socket is inserted into the pipe with a pipe socket, para after the first caulking caulking material, and then sealed with a sealing material, make it become a strong closed whole.
Q:what GPM flow rate of water thru 1.5 (or 2) plastic tubing 2800'long with gravity drop of 80' ? Please ad?
Pressure Drop Online-Calculator Calculation output Flow medium:Water 20 °C / liquid Volume flow::34.95 gal/min Weight density:998.206 kg/m³ Dynamic Viscosity:1001.61 10-6 kg/ms Element of pipe:circular Dimensions of element:Diameter of pipe D: 2 in. Length of pipe L: 3000 ft. Velocity of flow:3.57 ft./s Reynolds number:55078 Velocity of flow 2:- Reynolds number 2:- Flow:turbulent Absolute roughness:.03 mm Pipe friction number:0.02 Resistance coefficient:404.69 Resist.coeff.branching pipe:- Press.drop branch.pipe:- Pressure drop:4992.72 lbw./sq.ft. 34.67 psi Based on my experience with real systems, 30 - 35 gpm seems reasonable for a 2 pipe with 35 psi pressure drop. A 1.5 inch pipe will give much less, a little over half as much, as a 2 pipe.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range