Nut Coke of 20--50mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We export many kinds of coke, such as CSR64 % and CSR 62 metallurgicalcoke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.
We can offer below grade Nut Coke of 20--50mm, origin from China.
ITEM GUARANTEED REJECTION
MOISTURE (as received) 8%MAX DEDUCTION FROM B/L WEIGHT.
ASH (dry basis) 13.5%MAX ABOVE14%
VOLATILEMATTER(dry basis) 1.5%MAX ABOVE1.9%
FIXED CARBON (dry basis) 85%MIN BELOW 83%
SULPHUR (dry basis) 1.0%MAX ABOVE1.3%
SIZE: 20-50MM 90%MIN
(-) 20MM 5%MAX ABOVE10%
(+) 50MM 5%MAX ABOVE10%
At present, the main customers are NOBLE GROUP, IMR and so on. Our mainoverseas markets are Japan, India, Brazil, Iran, Vietnam, and so on.
Let me know your demands then I can check availability.
- Q:What is the difference between coke and semi coke in ferrosilicon smelting process? In the process of energy statistics in the end should be 0.9714 of the conversion coefficient should be used with the conversion coefficient of 0.75 x 0.9714, please expert advice? emergencyUrgent!
- Coke strength is poor, poor permeability, high temperature performance is poor, the use of a large risk, easy to cause fluctuations in blast furnace conditions. Prices are relatively cheap. Low temperature coke and high temperature are all coal products.
- Q:I now do a good job in the coke network editor, I would like to know more about coke
- Direct reduction in the blast furnace in the area above 850 degrees celsius. Because the CO2 generated at high temperature immediately reacts with the carbon in coke to form CO, it can be considered that the carbon in coke is directly involved in the reduction process:CO is used as reducing agent, either indirect or direct reduction. In order to continue to add CO, requires a certain degree of reactivity of coke.
- Q:What is the amount of waste gas produced by a ton of coke burning
- Metallurgical coke with high carbon content, high porosity, high strength (especially high temperature strength), is an important fuel and reducing agent of blast furnace ironmaking, but also the entire blast furnace pillar supporting agent and loose agent
- Q:The difference between coal and coke
- The production of coke products in general is mainly based on high temperature carbonization, and the carbonization temperature usually needs about 1000 degrees celsius. After years of development, the current large-scale coke furnace equipment and technology is relatively mature, have equipment to improve the yield so as to achieve large-scale production conditions, coke furnace built in recent years, each with a yield of about 500 thousand tons, the highest can be even more than 1 million tons / year, such as the recent launch of mine international coking plant two chamber coke oven 7.63 m, each with a yield of 1 million 100 thousand tons per year.
- Q:The cost of iron ore and coke
- At present the general level of building materials enterprises, the price of 2400 yuan / ton steel
- Q:Effect of coal fineness on coke
- In coking, the caking property is not good and the coke quality is reduced. Therefore, from the perspective of the uniformity of coal, coal fineness of some good. From the operation point of view, the greater the fineness of coal coal bulk density is lower, the production capacity of coke oven is low, into the coke oven, fine coal powder easily by gas is brought out, and easy blockage of ascending pipe, gas collector, affect the normal production of the coke oven, and the set of tar in the trachea increased, the effect of recovery operation. Therefore, from the production point of view, the fineness of coal should not be too large. Bulk coal in the top of the coke oven, coal crushing fineness of the general control in less than 3mm component in the range of 73~83%. Tamping coking, generally about 90%. In this range, the fineness of pulverized coal can meet the requirements of coke quality and coke oven operation. The small coal crushing will reduce the adhesion and the bulk density of coal, so as to reduce the coke quality.
- Q:What are the companies that produce coke
- Too many enterprises to produce coke. You search on Baidu, coke, a lot of business
- Q:Effect of coke powder ratio on the index
- Quality index of cokeHigh temperature carbonization coke is the solid product, its main ingredient is carbon, the pore structure of spores (or pore porous) with crack and irregular crack. Have a direct impact on how much strength and crushing strength of coke, the index of crack usually (crack length per unit volume of coke in the index) to measure indicator. Pore structure is mainly used for measuring the porosity of spores (pore volume percentage of the total volume of coke) said that it affects the reactivity and strength of coke. The coke used for different purposes, the porosity index requirements change, but it usually requires 40 to 45% metallurgical coke porosity, casting requirements of 35 to 40%, the export of coke need to crack about 30%. coke with high and low levels of porosity, the use of coking coal has a direct relationship, such as gas refining is mainly coke, crack, high porosity, low strength; as in coking coal Break the coke refining base of small, low porosity and high strength. The strength of coke is usually the crushing strength and abrasion resistance of two indexes to represent the strength of coke can be broken. No cracks or defects and M40 values along the fault reference external shock resistance structure; wear strength of coke coke refers to the ability to form glass the surface resistance to foreign friction and no fragments or powder, expressed as the value of M10. The degree of M40 crack coke compressive strength affect the value, value of pore structure of coke impact wear resistance of M10 spores. The determination of M40 M10 and a lot of value, many German migon drum test our method.
- Q:Who knows the proportion of pig iron and coke used in Cupola
- There are doubts: blank parts output is too low.3, blank export rate: raw materials into melting after the formation of blank, under normal circumstances, the common casting investment for every 1 tons of pig iron, scrap steel and other major raw materials, the lowest to 85% iron, after casting output blanks, nozzle, nozzle, riser, riser for iron smelting water ratio of about 30%; blank standard export rate, nozzle, riser re melted continue after put into use; production enterprises invested 1 tons per dryer, iron scrap and other major raw materials to the lowest 85% of the hot metal, roughly the same with ordinary casting, casting blank after the (standard yield) for hot metal ratio is about 70%, water riser for hot metal ratio is about 15%, and the same outlet riser re melted after continued use.
- Q:What does the M40% and M25% mean in the analysis of coke?
- (2) mainly used in: Coal Science and Technology (first level), coal processing and utilization (level two), coal chemistry and coal quality analysis (level three)
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Nut Coke of 20--50mm
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords