NUT COKE of 10 to 30mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of NUT COKE of 10 to 30mm Description:
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
The physical properties of the coke with room temperature mechanical properties and thermal strength and chemical properties are closely related.Coke's main physical properties are as follows:
The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃;
Low calorific value of dry ash-free basis for 30-32 kj/g;
2. Main Features of the Metallurgical Coke of NUT COKE of 10 to 30mm:
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of NUT COKE of 10 to 30mm Images:
4. Metallurgical Coke of NUT COKE of 10 to 30mm Specification:
Parameters | Guarantee | Rejection |
Total Moisture ( As received basis ) | 8% max | |
Ash ( dry basis ) | 12.5% max | > 13.5% |
Volatile Matter ( dry basis ) | 1.5% max | > 1.8% |
Sulphur ( dry basis ) | 0.70% max | > 0.80% |
Phosphorus ( dry basis ) | 0.035% max | > 0.045% |
Size 10-30 mm | 90% min | |
+30 mm | 5% max | > 8% |
-10 mm | 5% max | >8% |
5. FAQ
What are coke's main physical properties?
on the relative density of density, coke, coke porosity, thermal conductivity for the heat capacity of coke, coke, coke, coke ignition temperature, coke thermal expansion coefficient of thermal stress and coke, coke shrinkage rate, coke resistivity permeability, etc.
The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃.
- Q:I now do a good job in the coke network editor, I would like to know more about coke
- (2) reducing agent.The reduction of ore in blast furnace is accomplished by indirect reduction and direct reduction. The indirect reduction is about 400 degrees centigrade. The indirect reduction is rising gas CO reduction in ore, iron oxide from high iron gradually reduced low iron until the metal iron, while producing CO2:
- Q:What is the amount of waste gas produced by a ton of coke burning
- Metallurgical coke with high carbon content, high porosity, high strength (especially high temperature strength), is an important fuel and reducing agent of blast furnace ironmaking, but also the entire blast furnace pillar supporting agent and loose agent
- Q:Natural gas can replace coke smelting pig iron
- Coke at high temperature (also some blast furnace pulverized coal, heavy oil, natural gas and other auxiliary fuel) in carbon with bubbling air oxygen in the combustion of carbon monoxide and hydrogen generated in the furnace, removing the rise in iron ore in the process of oxygen, thereby reducing iron. The molten iron is released from the taphole. An iron ore, which is a mixture of non - reducing impurities, such as limestone, to form a slag from the slag. The produced gas is discharged from the top of the furnace, and is used as a fuel for a hot blast stove, a heating furnace, a coke oven, a boiler, etc.. Blast furnace smelting is the main product of pig iron, as well as by-products of blast furnace slag and blast furnace gas.
- Q:In the coke analysis index, M40% and M25% respectively mean what?
- M40% and M25% represent the breaking strength rate, 40%>25%, which means that the M40% coke is more resistant than M25%
- Q:What is the reasonable ratio of coal to coke
- There are lignite, bituminous coal, anthracite, semi anthracite these categories. Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage.
- Q:What is the difference between coke and carbon residue? Coke is a high-temperature refining, carbon residue can be used for civilian fuel it?
- Coke concept:Bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). By high temperature coking coke for blast furnace smelting, casting and gas generated in the process of coking. After the recovery and after the purification of coke oven gas is not only a high calorific value of fuel, and is an important raw material for organic synthesis industry. Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% were used for blast furnace ironmaking blast furnace coke, so often referred to as metallurgical coke is coke. The special cupola molten iron and coke. Coke is the main fuel cupola molten iron. It is melting charge and molten steel overheating, the support column to maintain its good permeability. Therefore, coke should Have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
- Q:Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between
- The concept of coke:Bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). By high temperature coking coke for blast furnace smelting, casting and gas generated in the process of coking. After the recovery and after the purification of coke oven gas is not only a high calorific value of fuel, and is an important raw material for organic synthesis industry. Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% were used for blast furnace ironmaking blast furnace coke, so often referred to as metallurgical coke is coke. The special cupola molten iron and coke. Coke is the main fuel cupola molten iron. It is melting charge and molten steel overheating, the support column to maintain its good permeability. Therefore, coke should be Preparation of large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
- Q:What are the companies that produce coke
- Too many enterprises to produce coke. You search on Baidu, coke, a lot of business
- Q:The chemical composition of coke m10.m25 refers to?
- M10 refers to the wear resistance of coke, M25 refers to the crushing strength is the mechanical strength. Mainly the cold strength of coke. Coke is also the most important indicator is the hot state, CRI thermal reaction and CSR reaction intensity. In blast furnace production, both cold and thermal strength are important.
- Q:We would like to export a batch of coke, I would like to know what information is required for a permit
- Step 1: apply for an electronic key:The electronic key is equivalent to the enterprise identity authentication, after the application is similar to online banking U shield, the cost of 350 yuan. Including the physical Key ($150) and digital certificate price ($200), where Key is a one-time fee, digital certificates for the annual cost, valid for one year.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
NUT COKE of 10 to 30mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products