Product Description:
Our company began to export coke when China cancelled 40% of coke export tariffsand quotas on January 1, 2013.
We export many kinds of coke, such as metallurgical coke (met coke) of 30-80mm, theNUT coke of 10 to 30 mm, coke breeze of 0 to 10 mm, and so on.
Quality | Quality guaranteed |
Moisture (As receive basis) | 7% max |
Ash (dry basis) | 12.5% max |
Volatile Matter (dry basis) | 1.5% max |
Sulphur (dry basis) | 0.65% max |
Phosphorus (dry basis) | 0.018%max |
Size 10—30mm | 90%min |
-10mm | 5%max |
+30 | 5%max |
At present, the main customers are NOBLE GROUP, IMR and so on. Our main overseasmarkets are Japan, India, Brazil, Iran, Vietnam, and so on.
Should any of these items be of interest to you, please let us know. We will behappy to give you a quotation upon receipt of your detailed requirements.
- Q:The coke is divided into several separate uses
- Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. The metallurgical coke quality standard (GB/T1996-94) developed in China is the quality standard of blast furnace.
- Q:What is the main purpose of the use of coke
- (2) reducing agent.The reduction of ore in blast furnace is accomplished by indirect reduction and direct reduction. The indirect reduction is about 400 degrees centigrade. The indirect reduction is rising gas CO reduction in ore, iron oxide from high iron gradually reduced low iron until the metal iron, while producing CO2:
- Q:The difference between semi coke and coke
- Coke is used for smelting iron alloy coke, and the coke is used in blast furnace and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, heating agent and columnar skeleton.
- Q:Coke boiler belongs to coal-fired boiler
- In addition, the utility model is characterized in that the utility model is used for heating and catering industry. Generally speaking, coke boiler belongs to coal fired boiler. Reason is that coke is a coal and fat coal for coke production.
- Q:What is the difference between coke and carbon residue
- Gasification coke, which is used in the production of coal gas, is mainly used in the fixed bed gas producer with solid slag, as the raw material for gasification, producing CO and H2 as the combustible component:C+O2 - CO2+408177KJCO2+C - 2CO-162142KJC+H2O - CO+H2-118628KJC+2H2O - CO2+2H2-75115KJ
- Q:What is the use of petroleum coke
- According to the quality can be divided into two kinds of primary and qualified products. Qualified products are divided into six grades. Used in the manufacture of electrodes, calcium carbide, corundum and so on and used as a filling tank, also used as insulating materials and fuel, etc..
- Q:Coke crushing equipment prices, manufacturers offer is how much
- The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke)
- Q:How to calculate the average particle size of coke
- Broken before and after the comparison of granularity, see D50 on the line. There are many kinds of average grain size, and the calculation steps are more complicated.
- Q:How much coke can a ton of coal
- But before the words to use 1.5 tons of coking coal to produce a total of 1 tons of coke
- Q:What is the phosphorus content in coke
- Generally, the phosphorus content of coke is low, about 0.02%.The bituminous coal is heated to 950-1050 DEG C under the condition of air isolation
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
