Monocrystalline Solar Panels 200W

Ref Price:
Loading Port:
Shekou
Payment Terms:
TT or LC
Min Order Qty:
10 watt
Supply Capability:
300000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Solar Monocrystalline Series Panels

Introduction of Solar Monocrystalline Series Panels

CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.

 

Characteristics of Solar Monocrystalline Series Panels

I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III Resisting moisture and etching effectively, not effected by geology.

 

Standard Test Conditions of Solar Monocrystalline Series Panels

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Advantages of Solar Monocrystalline Series Panels

• CNBM Solar performance guarantees for 25 years

• Timeliness of delivery

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel supplier inChina, we strive to provide our customers with excellent service, superior products and unmatched value.

 

 

Temperature Coefficient of Cells

NOCT

47±2

Temperature Coefficients of Isc (%/)

0.064

Temperature Coefficients of Voc (%/)

-0.33

Temperature Coefficients of Pmp (%/)

-0.45

 

FAQ:

 

1.      Can you tell me the parameter of your solar panels?

We have different series of cells with different power output, both from c-si to a-si. Please take our specification sheet for your reference.

2.     How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

3.     Can you do DDU for us?

Of course,we can do it for you

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Will a 2W, 2V mono solar panel power up a laptop battery?
I'm afraid neither of these panels will do much for charging or running your laptop. If the power brick is supposed to emit 5 volts at 5 amps, that's 75 watts. Neither of those panels provides enough voltage and the power output is obviously far too small. The capabilities of solar power are vastly overestimated for small panels. Sunlight is limited to about kilowatt per square meter under ideal conditions (summer time, clear blue sky, for a few hours around noon in the US southwest). But consumer panels top out at about 5% efficiency, so your limit is 50 watts per square meter - in other words you would need about half a square meter, or about six square feet, of panel to provide 75 watts. And even under ideal conditions you will only get that much for a few hours each day. Also, the panel's voltage output is not regulated, so even if you find a panel that emits 5 volts (this would actually have to be made up of groups of 30 cells in series, as they emit half a volt each at most) you can't just connect the panel output into your laptop's DC in. You'd need a regulated DC-to-DC supply, and since that is not 00% efficient it will cost a bit of the power... now you need even more panel area. All in all, not really a practical thing to carry along on a camping trip.
Q:Solar Battery System?
A solar panel is usually 36 cells and intended to charge a 2V lead acid battery. The battery in laptops may be somewhere between 5 and 20V. The panel might charge a laptop when it is cold, but they heat up in the sun and then it would no longer charge. Typical lap top power supplies are 3 to 4 amps. You need 2 panels in series to get enough voltage to charge the battery directly, but this is wasteful. If you want to charge at the same rate as a lap top power supply you need large panels to provide 5 amps. The 5 Amp panel will only give 5A when pointed directly at the full sun. There may be between 2 and 5 hours a day equivalent full sun depending where you are, time of year. If you want more than that, you need larger panels, or more than one in parallel for a 2V system. It makes sense to charge a 2V battery with the solar panel, and use that to operate the lap top with a car type power supply for a laptop, which runs from a 2V battery (see link below for an example). Get the biggest panel you can afford, and the battery should be larger if you want to run the lap top when the sun isn't shining. Perhaps a 20AH battery is a minimum size. All this costs more than a lap top.
Q:solar panel, dc light help?
You can't really judge the watts for solar lighting the same way you could for dc lighting. This is because of several factors The lights that you showed ARE NOT high quality lights and furthermore; they are not a well-known brand. Also, I would be suspicious of any store that offers lights for less than half of what other stores do. They are dumping the merchandise, which means it could have been sitting around for a while. MAXSA Innovations makes good solar lamps, so does Solar Goes Green. As the other responder wrote, you are better off using dedicated solar spot lights or floodlights than trying to integrate a solar panel into regular solar lights. A 00 Watt solar panel is pretty strong, and you also would need a battery. Unless you know how to rig up the system with appropriate controllers to make sure too much energy doesn't get into the rechargeable battery (lithium ion or NiMH), you take a risk on having the whole system fry out.
Q:what colour can solar panels be ?
I have only seen solar panels in a dark blue because of the material they are made of. Now the case can be any color I guess but aluminum (silver) seems to be common.
Q:I have two ARCO M55 solar panels. What do I need to connect to a 2Volt bank of batteries.?
You can buy Solar Charger Regulators. I don't. These chargers limit the charging current to the batteries, so you do not get a full efficiency of the solar panel. They disconnect the batteries from the user side (the bulbs you use) if the battery voltage goes below a certain level (i.e. below 8V for a 2V battery), so you cannot use all the power available in the batteries, even in emergency. They introduce, at least, a 0.7V loss (diode forward voltage) between the panel and the battery. If you have SEVERAL panels and a lot of batteries, use a controller as above. If you only have one panel, insert a 5A trip fuse in line (in your case: twice the current of the panel), and a 0-20A diode in series between the panel and the batteries (Kathode side of the + of the battery, Anode side of the + of the panel). Install a voltmeter across the battery. The fuse will prevent any short or over-charge current. The diode will prevent the battery to discharge into the panel at night if it is not already protected. The voltmeter will allow you to watch the status. Your thought of limiting the voltage is useless: should the battery be low, the panel will drop its voltage, limited by the max current. Should the battery be fully charged and the solar panel at full efficiency, it will just try to charge the battery more. A bit of bubbles may result, hence the voltmeter to watch over it. If you want to limit the voltage to 4V, put a 4V Zener (4Vx2.5W!) in series with a resistor of, say, 7V-4V/2.5A or ~ Ohm, 5W, in parallel with the panel.
Q:Does anyone know a company that will make custom solar panels?
Make okorder.com
Q:Solar Panel Help? Beginners?
You should have your dad check out this site. Easy to learn and very effective. bit.ly/solar9WXBrw
Q:Solar Panels, anyone?
Unless you live in an area with a very high UV index, like Las Vegas for example, solar panels are not cost-effective. You definatly should not attempt to install solar power yourself if you intend to power a residence with it (unless you live in a shack). A certified electrician is required in order to connect your equipment to your house's electrical system. It isnt just as simple as a few panels. You need a converter that turns the DC voltage generated into AC. You also need equipment to connect to the metering system for your house. If you want to see if it is cost effective, you will need your electric bills that show usage for a year and the price per kWH. There are a lot of websites that have calculators for solar power systems.
Q:Homemade Solar Panel : Hi! guys i want to know what do you think about Homemade Solar Panel?
Have okorder.com . It may extremely teach everyone!
Q:I would like some info on Solar panels and Wind Generators...please?
You may have to put a snow roof over the wind generator to keep it working. A solar hot water system might be hard investment where you are but it could work if it's designed right. Check out the solar companies in your area for ideas.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range