Mild Steel Welding Rod AWS E6013 Weding Rods Factory
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 Tons m.t.
- Supply Capability:
- 1000 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
mild carbon steel welding electrode AWS E6013
suitable for welding on thin plate of low-carbon steel or light structures
mild carbon steel welding rod AWS E6013
is a low carbon steel electrode with rutile type coating and suitable for both AC and DC.
The electrode is able to provide excellent welding technological performance because the arc is extra stable and spatter loss is negligible, the slag has good fluid and solidified slag is very easy to remove, the manipulate is free and restrike is easy.
It can give smooth and beautiful ripples.
1, welding rod: AWS E 6013
2, Available size: 2.5*300/350mm/3.2*350mm/4.0*400mm/5.0*450mm
3, chemical composition: C<=0.12, Mn 0.30--0.60, Si<=0.35, S<=0.035, P<=0.040
4, It is suitable for all position welding of steel sheets and irregular joints even under unfavorable conditions.
5, has excellent welding technological performances
6, The arc is stable and the spatter loss is negligible
7, The slag is fluid and when hardened it is compact and easy to remove
8, It is better for welding structures of steel sheets. Vehicles, buildings, machinery-manufacture, vessels and various structures of low carbon steel
9, Packing in 1kgs/box, 20boxes per carton. 5kgs/box, 4boxes per carton .NW: 20KG
10. Certificates: ISO9001 and CCS (China Classification Society).
Application: Used to weld low carbon steel structures, especially suitable for welding thin flat, intermittent shorter welds, as well as some smooth appearance cover.
CHEMICAL COMPOSITION OF MELTING METAL%
C |
Mn |
Si |
S |
P |
≤0.10 |
0.3-0.6 |
≤0.035 |
≤0.035 |
≤0.040 |
Reference Current
Diameter(mm) |
2.0 |
2.5 |
3.2 |
4.0 |
5.0 | |
Current range(A) |
Flat(A) |
40~60 |
60~90 |
90~130 |
140~190 |
190~240 |
Vertical&Overhead (A) |
30~55 |
50~80 |
80~120 |
120~170 |
150~200 |
- Q:Normally, the proportion between submerged arc welding wire and flux should be answered
- 1:1 or so. The amount of filling welding is less, but the amount of cover welding is more. When the steel plate is no more than 9mm thick, the flux requirement is the same. If the production plan is reported, according to your total amount of work, the total length of the weld is greater, the results of the added proportion is smaller.
- Q:Or welding door flower (parts) are generally much better at the factory with a welding wire of 1 mm or 0.8 mm wire is not well below the welding wire 0.8 wire is how much I used 0.8 small wire welding wire than in other plant good welding is much wire. Thank you!!!
- 0.6, it is difficult to weld again.
- Q:What is the advantage of welding wire without copper plating?
- Solid core welding wire copper plating initially not to rust but for lubrication, it is mainly to rust and copper wire wire increased, but Issa has no domestic copper welding wire, because the conductive, splash smaller, and because no copper dust is small
- Q:Carbon steel, with two, welding current, voltage, welding speed, wire diameter, thank you
- Various parameters of CO2 gas shielded arc welding(1) wire diameter;The diameter of welding wire is usually chosen according to the thickness of welding piece, the position and efficiency of welding application. When welding in all position welding of sheet or plate, the welding wire below 1.6mm (called wire CO2 gas shielded welding) is adopted.(2) the welding current depends mainly on the wire feeding speed. The faster the wire feed, the greater the welding current. The welding current has the greatest influence on the weld penetration. When the welding current is 60~250A, that is, short circuiting transition welding, the weld penetration is generally 1mm~2mm; only when 300A or more, the melt body is obviously increased.(3) when the arc voltage is short circuiting, the arc voltage can be calculated by the following formula: U=0.04I+16 + 2 (V)At this point, welding current is generally below 200A, welding current and arc voltage of the best fit in table 2. When the current is above 200A, the formula for calculating the arc voltage is as follows. U=0.04I+20 + 2 (V)(4) welding speedIn semi-automatic welding, the welding speed of skilled welders is 18m/h~36m/h, and the speed of welding can be as high as 150m/h at automatic welding.(5) the extending length of welding wire;The extending length of general wire is about 10 times of the diameter of wire, and increases with the increase of welding current.(6) the normal welding gas flow, 200A has been under the sheet metal welding and CO2 welding flux is more than 10L/min~25L/min.200A, the flow of CO2 for large specification of 15L/min~25L/min. thick wire automatic welding for 25L/min~50L/min.
- Q:The difference between Jinqiao welding wire 50-6 and 70S-6
- Similarly, ER70S-6 is the American Standard, 70 of which means tensile strength, expressed in PSI, while 50S-6 is the domestic standard, and 50 represents tensile strength, expressed in MPA.
- Q:Two welding machine, 1 of the welding wire into 1.2 of the need to change where?
- Replace the torch head with a matching pair. Do not change the other, or adjust the current properly.
- Q:A bottle of argon 40L used for welding, how long or how many wires can be welded? What's the price of argon now?
- The total volume of argon gas can be calculated in this way: 40*150=6000 litres also take into account the actual filling pressure and the remaining gas at the end of the cylinder, so the amount of actual use must be less than 6000L.In the process of use, we should consider the welding method, manual operation, general 8-15L/min, mechanical or automatic continuous welding, the use of flow should be big.The market is based on the amount of argon filling volume, the size of the bottle is estimated to be almost. Ordinary argon 60-75 yuan / bottle unequalThe higher the purity, the more expensive the price.
- Q:H0Cr20Ni10Ti H08Cr19Ni10Ti (ER321) to replace the standard YB/T5092-2005? Only H08Cr19Ni10Ti (ER321), it is not written to replace the one ah, whether there is a substitute for national notice? For the pressure vessel, to use H0Cr20Ni10Ti but the seller said this is a veteran, H08Cr19Ni10Ti (ER321) is a new grade, but can not find alternative basis?
- If not there will be accountability and a standard version of the standard difference, look for the advice on the Standard Version, usually the new standard will be stated in the preface and a version of the difference and reason for replacement, if not to look at the last version.
- Q:Which subjects should be included in the purchase of welding wires (auxiliary materials) in industrial enterprises?
- Purchase wire industrial enterprises (auxiliary materials) as raw materials. Subjects included in the supplementary cost of production cost, no consumption of wire, the end do refund processing, according to the actual amount allocated to product cost.
- Q:What is the standard of H08Mn2SiA diameter 0.8 wire welding?
- Gas shielded arc welding () is the national wire used for GB/T 14958-1994 shielded weldingThis standard specifies the classification, code name, size, shape, weight, technical requirements, test methods, inspection rules, packaging, transportation, storage marks and quality certificates of steel wires used for gas shielded welding (hereinafter referred to as welding wires).This standard is suitable for gas shielded welding (COZ, COz+Oi, COi+Ar) cold drawn steel wire for low carbon steel, low alloy steel and alloy steel.
1. Manufacturer Overview |
|
---|---|
Location | Hebei,China |
Year Established | 2004 |
Annual Output Value | US$5 Million - US$10 Million |
Main Markets | North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Northern Europe Southern Europe South Asia |
Company Certifications | ISO 9001:2000;ISO 9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin port,Qingdao port |
Export Percentage | 81% - 90% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese, Russian |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | 10 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range | Low and/or Average |
Send your message to us
Mild Steel Welding Rod AWS E6013 Weding Rods Factory
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 Tons m.t.
- Supply Capability:
- 1000 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords