LED FILAMENT LAMP BULB 6W NEW DEVELOPMENT
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Item | Parameter |
Power | 6w |
LED Quantity | 144pcs LEDs |
Colors | Warm white, white, cool white |
CCT | 2500-6500K |
Ra | ≥75 OR 80 |
Lifespan | 30000-50000 Hours |
Light flux | 600LM |
Light efficiency | 100LM/W |
Glowing | 360° |
Material | Glass, Aluminum |
Net Weight | 0.032KG |
Gross Weight | 0.046KG（1/pc） |
Size | ￠55*96m |
Serial | Check a project | Check condition | parameter | Allowable error | Remarks |
1 | Total Power | 25℃ | 6W | ≤±0.5 | |
2 | Input | 25℃ | AC220V | ±20V | |
3 | Power Factor | 25℃ | ≥0.9 | ||
4 | Work Temp | 5℃ | -40℃--50℃ | ≤±1W | |
5 | Frequency | 25℃ | 50hz |
● Product characteristic |
1. High brightness LEDs 2. Long life service, lasts up to 30000hr 3. Excellent weathering resistance, insensitive to humidity, suitable for wide range temperature 4. Easy to install, easy to use 5. No strobe flash, speedy start, no flicker, good for eyes 6. Safe, energy-saving, environment friendly |
● Application Scopes |
Suitable for most indoor lighting applications, such as household, hotel, shopping mall, supermarket, office, car park, factory, advertising box, car, vessel and other transportation, can significantly reduce the energy consumption; give you a green light environment |
- Q: LED what is the plastic shell of the bulb? What plastic material is better? What do you need to pay attention to?
- LED is the most important heat, light will not be so serious, the thermal conductivity is relatively high Aluminum Alloy, so LED manufacturers usually choose to use aluminum shell
- Q: LED bulb PC, will the white cover affect the color temperature of the finished lamp?
- The chip may damp, no air humidity warehouse management process; or the chip in the assembly process by foreign influence, the lampshade is removed, and then measured once in the color of the aluminum plate radiator
- Q: LED what is the glue between the aluminum base of the bulb and the cooling aluminum?
- A lot of sticky glue can live it yourself have not tried to guess 502 good brothers of this kind of glue can be, but do not know good heat resistance and high power LED heat is still very large, if you are a small power never mind
- Q: What's the reason why LED bulb gets a lot of heat?
- If the radiator has a large radiating area, the temperature is low
- Q: What's the cause of the noise during the aging of LED bulb bulbs?
- This should be the power problem. It's easy to make a noise because there are so many parts of the power supply.
- Q: Led the bulb is flashing. What's wrong with it? How do you fix it?
- There may be no aging, or there may be a power problem.
- Q: LED can the bulb be used in the bathroom?
- Ordinary bulbs can be used in the bathroom, the bath water, protection grade ordinary bulb is not high, it is easy to make when water vapor lamps or rust element short circuit failure and cause some accidents. The bathroom is suggested by the power supply lamp, lamp waterproof plate etc..
- Q: What are the characteristics of LED bulb?
- The service life is long, and the average life can reach 100 thousand hours.
- Q: Why can't the voice switch control the time of the LED bulb?
- The power of LED bulb is much less than that of incandescent lamp, and the control loop and light bulb of simple sound control lamp are connected in series, and the load is different and the time delay is different
- Q: How did the trademark on the LED bulb go up?
- Laser printing equipment is generally printed up, so that the ridge up color is not so deep, but also can not wipe off
Send your message to us
LED FILAMENT LAMP BULB 6W NEW DEVELOPMENT
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
