LED FILAMENT LAMP DIMMABLE BULB 6W NEW DEVELOPMENT
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Item | Parameter |
Power | 6w DIMMABLE |
LED Quantity | 144pcs LEDs |
Colors | Warm white, white, cool white |
CCT | 2500-6500K |
Ra | ≥75 OR 80 |
Lifespan | 30000-50000 Hours |
Light flux | 600LM |
Light efficiency | 100LM/W |
Glowing | 360° |
Material | Glass, Aluminum |
Net Weight | 0.032KG |
Gross Weight | 0.046KG(1/pc) |
Size | ¢55*96m |
● Product characteristic |
1. High brightness LEDs 2. Long life service, lasts up to 30000hr 3. Excellent weathering resistance, insensitive to humidity, suitable for wide range temperature 4. Easy to install, easy to use 5. No strobe flash, speedy start, no flicker, good for eyes 6. Safe, energy-saving, environment friendly |
● Application Scopes |
Suitable for most indoor lighting applications, such as household, hotel, shopping mall, supermarket, office, car park, factory, advertising box, car, vessel and other transportation, can significantly reduce the energy consumption; give you a green light environment |
- Q: Seeking the production process of LED bulb... Thanks
- 10 points, Baidu wants to be a LED engineer. LZ is a real budget man
- Q: What's the cause of the noise during the aging of LED bulb bulbs?
- Either AC or DC LED lighting there will be a power module, a small hidden in the lamp body, the daily working state can produce high temperature, if the AC power supply temperature will be higher, because the lamp body appears to flicker, high temperature and long time will lead to the power supply module parts welding, weld or aging, so a lot of alternating current LED lighting the metal shell, to facilitate heat dissipation, the DC power supply is adopted to eliminate the flicker, reduces the electrical power, so the DC temperature should be low.
- Q: LED bulb w can replace 40W incandescent lamp
- D lamp lumen value is ordinary incandescent lamp about 3 times, but LED ball bubble mask transmittance should be based on material, can use 10W or so LED acrylic mask ball bubble instead. Because I received a similar customer complaint, 7W's LED light bulb was replaced with an 20W energy-saving lamp, which was not bright enough.
- Q: What are the requirements of the LED series inspection specification for bulb bulbs?
- Insulation resistance: the lamp should not be placed for 48 hours in the damp box with relative humidity of hours. The air temperature in the box shall be controlled at any value between 20~30 degrees centigrade, and the temperature difference is within 1 degrees. The insulation resistance shall be measured in the wet box. Now the DC voltage on the lamp is about 500V. After 1min, the insulation resistance test will begin. The insulation resistance between the lamp holder, the current carrying metal parts and the accessible lamp parts shall be no less than 4M ohms.
- Q: What's the reason for the LED bulb strobe?
- Currently on the market with single stage PFC driver circuit, there will be strobe, causing the flash because the ripple is too large. Single stage pFC circuits are not possible
- Q: I want to ask for high power LED bulb lamp wire inexplicably broke, and in large quantities. Is the quality of the lamp?
- Have you used it or haven't you bought it yet?
- Q: 60W how many lumens and how many W LED bulb does incandescent bulb replace?
- 100lM/W LED bulb, 4-5W can be replaced. If it is white 4W can be, if it is warm white (yellow light), preferably 5W, mainly human eye feeling, white light than Huang Guangliang.4-5W LED bulb, equivalent to 12-15W energy-saving lamps
- Q: LED what does "A60" mean by bulb 60? And what does "MR16" mean?
- 60: diameter 60mm (metric unit) MR16: diameter is 16*1/8*25.4mm (Imperial units), although refers to the diameter, but the height and other dimensions are also prescribed
- Q: What's the difference between a glass cap for a bulb and a PC hood?
- Surface hardnessPC biggest weakness is surface hardness, PC although resistance to impact, smashing not broken, but after all is plastic, surface hardness value is not high, easy to scratch, easy to scratch.While glass is easy to break, not shock, but the surface hardness is high, it is not easy to scratch the surface!Other weather resistant, temperature resistant supplementsPC cover, in processing, plus UV agent
- Q: LED bulb lamp. Is there a good drive or no drive? Is the lamp of good or integrated?
- LED bulb: directly driven by not using AC-LED light source, light effect of the whole lamp life (compared with driving security; some) integrated LED relative heat transfer to the high requirements, high cost, simple assembly, do a single power source in low cost, high light efficiency.
Send your message to us
LED FILAMENT LAMP DIMMABLE BULB 6W NEW DEVELOPMENT
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords