Iron Butterfly Valve DN1100
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Technical Date:
Size: DN40-DN1200
Nominal Pressure: PN10/PN16
Operation Temperature: -10°C~150°C
Suitable Medium: Water,Sewage,Seawater,Gas,Food,Oils,etc.
2. Standard
Design Standard: GB/T 12238-2008
Structural Length: GB/T 12221-2005
Top Flange dimensions: ISO5211
Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125
Type of connection: Wafer Type
3. Feature:
This valve is mainly composed of body, butterfly plate, valve shaft, seat and transmission devices. Simple and compact structure, small portable, convenient for transport, install and dismantle. 90 degrees of opening and closing, switch quickly, operating is small, light energy; Sealing performance is good, service life is long, can achieve zero leakages. Flow curve tending to straight line, excellent regulation performance.
4. Sealability:
The valve for rubber seal, closing butterfly plate and seat sealing performance is good, two-way sealed good performance and the torque is small. the friction is very small between butterfly plate and the seat seal. The valve shaft drive the butterfly plate, butterfly plate do 90 degrees rotation. Butterfly plate flexible for opening and closing, no card acerbity, beating phenomenon, small torque.
- Q: I got my timing belt done on a 1999 Civic Si on September 26 @ 113,699 miles. at 116,9xx miles I bent a valve on my third cylinder. How likely is it that the timing belt is the reason why this happened? I heard that if the timing belt is a tooth or so off, it could bend a valve. So is it likely that this could have happened? Anyway to check?
- If it was a timing belt issue it woudn't have only been one cylinder. And usually if it's only off by one tooth, it just runs poorly. IT has to be off by quite a bit, or the belt has to straight up break to bend a valve,, if that happened it would have made a horrible clanging noise repeatedly before it eventually sputtered out. the 1999 Si revs to what... 8000 rpms? You didn't happen to miss a shift and over-rev the engine, did you?
- Q: 16 inches below the choice of electromagnetic valve can be the same, it turned out to be DN200 election 1/4, and now there are DN350 can also use this? With it, limiter, pressure relief valve, locator model will change?
- This is our company's products in Pucheng clean energy Co., Ltd. successful use case, if you need case details, you can give me a QQ number, I sent you. In addition, I suggest you add a pneumatic control valve, so that the safest, no map, I can give you. Saved is to look at the project site, if the north, the electromagnetic valve is recommended to use the 1/2 aperture, and a gas control valve or 1/4, it can guarantee the opening speed of the valve, special attention is on the use of the electromagnetic valve chain, this is very important, I will be the general experience specific issues to deal with specific, can not copy blindly, in most cases, this is no problem. And 1/4 also to see traffic, is also 1/4 solenoid valves, flow valve with big caliber is not the same, is not the same, the 1/4 path from the 2mm-12mm range, the CV value is small, about 0.1, with a large amount of 1.2, has big gap, valve opening time is also a great gap, to distinguish between the.
- Q: Classification of telescopic butterfly valve
- (2) temperature butterfly valve. 120 C<t<450 C butterfly valve(3) normal temperature butterfly valve. One 40C<t<; 120 C butterfly valve(4) low temperature butterfly valve. One 100<t< one, 40 C butterfly valves(E) ultra low temperature butterfly valve. T< one, 100 C butterfly valve (1) clip butterfly valve(2) flanged butterfly valve(3) lug butterfly valve;(4) welded butterfly valve
- Q: What is the difference between turbine butterfly valve and flanged butterfly valve?
- The worm gear is the driving mode and corresponds to the handle; the flange is connected and corresponds to the clamp. Flange worm valve is generally, the handle of the butterfly valve
- Q: Import electric butterfly valve which brand is more reliable?
- Recommend Sichuan Ding Heng petroleum machinery company sales agent SPM butterfly valve and FMC butterfly valve, we are partners for many years, have been working together are very happy.
- Q: How warm is the PTFE butterfly valve?
- PTFE butterfly valve, sealing surface of fluorine plastic, temperature -29 ~ 450 degrees
- Q: How to calculate the size of the manual butterfly valve?
- I don't know what size you mean, and what about DN in diameter, such as DN125, which means 125 cm in diameter
- Q: My bike has now 6200 miles on the odometer. The manual says that a valve adjustment should be performed every 6000 miles. But the bike runs fine. Can I just have the valve checked or should I have them adjusted even though the bike is fine? What will happen if I just keep riding it?
- First off you are suppose to take your bike back to have your valves adjusted after 500 miles. Anything later can cause problems. The motor is already broken in. why did you wait so long to have them adjusted ? Your vibration is the tire is not balanced right , take it else where. good luck
- Q: How do the butterfly valves d341 and d343 differ in appearance?
- D341 is a wedge type single gate structureThe D343 is a parallel single gate structure
- Q: Butterfly valve structure and working principle
- The clip type butterfly valve is connected with the two pipe flange with a stud bolt. The flange type butterfly valve is provided with a flange on the valve, and bolts are used to connect the flanges at the ends of the valve to the pipe flange.
Send your message to us
Iron Butterfly Valve DN1100
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
