High-Quality Plastic Tubes - PVC Tubes & UPVC Drainage Pipes from China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: Can I use a plastic tube instead of a gas pipe?
- HDPE high density polyethylene plastic, English name is "High Density Polyethylene", referred to as "HDPE"". HDPE is a thermoplastic resin of high crystallinity and non polarity. The appearance of the native HDPE is milky white and is somewhat translucent in the narrow cross section. PE has excellent properties that are resistant to most life and industrial chemicals. Certain kinds of chemicals produce chemical corrosion, such as caustic oxidants (concentrated nitric acid), aromatic hydrocarbons (xylene), and halogenated hydrocarbons (carbon tetrachloride). The polymer does not absorb moisture and has a good water vapor resistance and can be used for packaging purposes. HDPE has good electrical properties, especially insulation, dielectric strength, so that it is suitable for wire and cable. Medium to high molecular weight, with excellent impact resistance, at room temperature, even at -40F low temperatures.
- Q: When the concrete is poured into the concrete, the formwork is lined with white tubes. What is that for?
- Early wall bolt not used in casing, after the completion of concrete pouring in concrete wall bolt, the bolt ends exposed on the outside part of the concrete cut off, it directly resulted in the increase of cost. In recent years, in order to save the construction cost, so that the wall bolt can turnover, PVC plastic pipe for the bolt rope and then placed in the corresponding position within the template, after pouring concrete and reaches a certain intensity, can be pumped out by bolt.
- Q: I hate the plastic tubes. They're fiddly awkward to use, especially as they get near running out. Metal was SOOO much easier. Just roll up the tube it stays rolled up. Just squeeze the metal it doesn't pop right up as soon as you release the pressure, but stays down. Basically metal packaging was right for the job. Plastic tubes are a poor, inadequate alternative, I hate them.It can't be due to cost, since so many drinks are still sold in metal cans, if it was down to the cost all the metal cans would be replaced with cheaper plastic alternatives, but they're not.So what is the reason it's only plastic for toothpaste now?
- It is due to cost. Drinks used to be sold in steel cans and glass bottles, now they are sold in aluminum cans and plastic bottles, due to cost. You can buy a plastic clip to put on the toothpaste tube to solve your problem.
- Q: Can plastic tubes be painted or coated?
- Yes, plastic tubes can be painted or coated. However, it is important to use a paint or coating specifically designed for plastic surfaces to ensure proper adhesion and durability.
- Q: The difference between metal hose and corrugated plastic pipe
- The metal hose is usually made of stainless steel, or can be made of stainless steel braid. It is also made of a layer of stainless steel braid at one time. It is actually made of plastic or rubber. The main features are corrosion resistance, high temperature resistance, pressure resistance, shock absorption, and bending, easy installation.
- Q: The inner and outer walls are plastic, and the middle layer is steel
- The utility model has the advantages of light weight and convenient installation, and the pipe connection adopts an electric heating welding joint, which has the advantages of strong axial tensile resistance, reliable and reliable connection technology, complete variety of pipe fittings and complete connection with other pipelines, valves and equipment
- Q: Im working on an art project right now and I want to buy some 4ft long T8 Blue light bulbs. But I cant seem to find any US companies selling them. I found plenty of over seas companies but im looking for some place to buy in the states to avoid high shipping cost. Does anyone know where i could find some?
- Are okorder /...
- Q: How do you prevent plastic tubes from becoming discolored?
- One way to prevent plastic tubes from becoming discolored is to store them in a cool and dark place, away from direct sunlight and heat sources. Additionally, using a protective cover or wrapping the tubes with a light-blocking material can help minimize discoloration caused by exposure to light. Proper cleaning and maintenance, such as regular washing with mild soap and water, can also help prevent discoloration and keep the tubes looking fresh.
- Q: Can plastic tubes be customized in terms of color and size?
- Yes, plastic tubes can be customized in terms of color and size. Manufacturers can produce plastic tubes in various colors and sizes to meet specific customer requirements and preferences.
- Q: They live in an aquarium that has an attachment on top that allows for a second floor. There are plastic tubes that run between the two levels. They both constantly scratch violently at them, and i dont want them to break the tubes. Does anyone know why they're doing this? And what can i do to stop them? Maybe there's something else i can give them to scratch?
- The first thing you need to do is put the gerbil in a closet, bathroom, or another room at night so you can sleep and the gerbil can make noise. :) Gerbils will shred anything and everything so ideally they should be kept in glass aquararium tanks which are easier to clean and therefore more sanitary and healthier for your pet. Wire cages only encourage rodents to poke their noses through and chew on the bars. That's unsanitary because it's hard to clean and they'll often get sores on their noses from doing that. Also, since respiratory infections are common you want ventilation, but not a draft. So get rid of the plastic - it'll get chewed to bits eventually anyway - and get a tank. Also put plenty of chewing blocks in there so your gerbil can keep it's teeth filed down. That noise can also be loud, but it's a necessary for them to chew and you just put them in another room.
Send your message to us
High-Quality Plastic Tubes - PVC Tubes & UPVC Drainage Pipes from China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
