Plastic Tubes PVC Tubes UPVC Drainage Pipes China On Sale With Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: What's the meaning of the laying of brick and concrete structures with concealed pipes?
- Line pipe laying:The wires are laid in bricks or concrete. There are two ways:Insert the wire tube and the bottom box before pouring;After the end of the masonry, slotted into the wire pipe and the bottom box, and then fill the groove.
- Q: Can plastic tubes be used for aquariums?
- Yes, plastic tubes can be used for aquariums. They are commonly used as part of the filtration system or for connecting different parts of the aquarium setup, such as air pumps, heaters, or external filters.
- Q: Can plastic tubes be used for greenhouse installations?
- Yes, plastic tubes can be used for greenhouse installations. They are often used as a cost-effective alternative to traditional materials like metal or PVC pipes. Plastic tubes are lightweight, durable, and resistant to corrosion, making them suitable for constructing greenhouse frames. Additionally, they can be easily shaped and installed, providing flexibility in design and layout.
- Q: i was wondering what would cause oil to lightly spray out of the plastic tube that hangs down out of the top end of the piston. the tube comes out of the top end right before the exhaust header bolts onto the piston.
- except this actual engine isn't comparable to another engine interior the worldwide a blown head gasket will blow coolant into the cylinder which will blow previous the jewellery into the crankcase. the different selection is a cracked head or case, that's a worst case situation. often if the water pump oil seal is going you will get oil interior the coolant with the aid of fact the oil is under greater rigidity than the coolant, direction of least resistance stuff. do no longer try this blind or on elementary propose, get a instruction manual. 30 greenbacks for a instruction manual is extra fee-effective than any restoration in case you screw up.
- Q: Describe what is involved in using a plastic graft tube for dialysis?
- this showed up in gardening landscape, probably because of the word 'tubing'. Resubmit your question to 'health' category. If you still don't get an answer, google Kidney Foundation or try Mayo Clinic (term: Mayo Kidney Dialysis)
- Q: Are plastic tubes suitable for use in the aerospace industry?
- Plastic tubes are generally not suitable for use in the aerospace industry due to their limited strength and resistance to extreme temperatures and pressures. Aerospace applications require materials that can withstand high stress, extreme environments, and have excellent mechanical properties. Therefore, more durable and high-performance materials like metals and composites are preferred for ensuring safety and reliability in aerospace components and systems.
- Q: What are the common diameters of plastic tubes used for irrigation in agriculture?
- The common diameters of plastic tubes used for irrigation in agriculture generally range from 0.5 inches (12.7 mm) to 2.0 inches (50.8 mm).
- Q: How do plastic tubes compare to acrylic tubes in terms of transparency?
- Acrylic tubes are generally more transparent than plastic tubes.
- Q: Can plastic tubes be used for marine applications?
- Yes, plastic tubes can be used for marine applications. Plastic tubes, such as those made from PVC or polyethylene, are commonly used in various marine applications such as plumbing, irrigation, bilge pumping, and water circulation systems. These tubes are resistant to corrosion, have good durability, and can withstand harsh marine environments, making them suitable for use in boats, ships, and other marine structures.
- Q: What are the advantages of using plastic tubes in the pharmaceutical packaging industry?
- There are several advantages of using plastic tubes in the pharmaceutical packaging industry. Firstly, plastic tubes provide excellent protection against moisture, light, and oxygen, ensuring the stability and integrity of pharmaceutical products. Secondly, plastic tubes are lightweight and portable, making them convenient for patients to carry and use. Additionally, plastic tubes are easy to squeeze and dispense the correct dosage, enhancing patient compliance. Furthermore, plastic tubes can be produced in various sizes and shapes, allowing for flexible packaging options. Lastly, plastic tubes are cost-effective and can be easily mass-produced, making them a cost-efficient choice for pharmaceutical companies.
Send your message to us
Plastic Tubes PVC Tubes UPVC Drainage Pipes China On Sale With Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
