PVC Tubes from China on Hot Sale with Good Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:Can plastic tubes be used for water filtration?
- Yes, plastic tubes can be used for water filtration. Plastic tubes can be used to construct various types of water filters such as activated carbon filters, sediment filters, and even reverse osmosis filters. Plastic tubes are affordable, durable, and can effectively transport and filter water, making them a popular choice for water filtration systems.
- Q:Can plastic tubes be used for aquariums or fish tanks?
- Yes, plastic tubes can be used for aquariums or fish tanks. They can be employed for various purposes such as creating water flow, connecting filters or air pumps, or even as decorations. However, it is important to ensure that the plastic used is non-toxic and safe for aquatic life, as certain plastics may release harmful substances into the water.
- Q:a molten plastic flows out of a tube 8 cm long at a rate of 13 cm^3/min where the pressure differential between the two ends of the tube is 18 cm of mercury. find the viscosity of the plastic. the i.d of the tube is 1.30 mm. the density of mercury is 13.6 g/ cm^3the answer is 0.097 kg/m.s or 97 cp! help!
- Hello Cedric Mapula, let us use the expression V/t = pi P a^4 / 8 l eta Here V/t = volume flown in one sec = 13 cm^3 / 60 s = 13/60 cm^3 /s pi = 3.14 P = 18*13.6*980 a = 1.3/ 20 cm = 0.065 cm l = 8 cm eta = ? Plug these and find the required eta i.e. coefficient of viscosity of liquid Ans : 0.969 g/cm*s = 0.969*10^-3/10^-2 kg/m*s = 0.0969 kg/m*s
- Q:i connected a plastic tube about 7 or 8 inchs long onto a butane can im wondering if when i push down on the can and put a match near it can the fire go back into the can and make the can explode
- Sure can, even if you've posted this in the wrong category. Funny thing about fire... it likes to burn as long as possible so if the flame makes it's way into the tube... you should duck. Don't be foolish, keep your hands, fingers, eyebrows, etc and quit playing with fire.
- Q:Our side-by-side, outside water and ice collector barely lets the water come out. We have plenty of ice because it usually never used. We did notice that the plastic tubing inside the refrigerator, is wrapped many, many times in a fairly large circle, plus, there is a kink in the tubing several inches before it disappears inside of the back of the refrigerator.Should I get rid of this extra, extra tubing, along with the kink? How many feet of this tubing should be inside the fridge?Thanks to all that answer.
- ours is rolled in the same position except there is no kink i just went and checked maybe thats why it dont come out good or maybe you have hard water and its clogged hope this helps you
- Q:Why should the residential outdoor drainage pipe be preferential for underground drainage plastic pipes? What's the harm of using precast concrete pipes?
- The buried plastic drain pipe has many excellent performances compared with the precast concrete pipe. The plastic pipe has the advantages of light weight, large length, less joint, convenient laying, reliable sealing, no leakage, and less pollution to the underground water source. In addition, the utility model has the advantages of high impact resistance, corrosion resistance, acid and alkali resistance, long service life, etc..
- Q:just needed to know before i ran into a potential disaster! lol -any tidbits of advise would be gladly accepted =)gt;
- the best advice you can ever get for a project like this.... use acrylic tanks!!! unless you have the specialized equipment for glass cutting (and the requisite skill) or you are using a professional for this.. odds are NOT in your favor that this will turn out well
- Q:What are the advantages of using plastic tubes in the industrial packaging industry?
- There are several advantages of using plastic tubes in the industrial packaging industry. First, plastic tubes are lightweight, which makes them easy to handle and transport. Second, plastic tubes provide excellent protection for the contents inside, as they are resistant to impact, moisture, and other external factors. Additionally, plastic tubes can be customized to fit specific product requirements, making them versatile for various industries. Lastly, plastic tubes are cost-effective, as they are typically cheaper to produce compared to other packaging materials.
- Q:looking for a place that sells plastic tubes to store wine, easliy stackable thanks
- Any beer and wine making shop will have EXACTLY what you need
- Q:Can plastic tubes be customized in terms of size and color?
- Yes, plastic tubes can be customized in terms of size and color.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Tubes from China on Hot Sale with Good Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords