High Purity Whiteness Aluminium Powder Al2O3 for Refractory Raw Materials
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Pure Whiteness Aluminium Powder Al2o3
It is a kind of aluminate cement wrought material based upon calcium aluminate, it is called Aluminate cement when it has been finegrinded to hydraulicity cementing material, its code is CA. When the cement has a grinded Al2O3 content of above 68%, it can be added with appropriate amount of α-Al2O3 powder as requirement.
Application:
1. aluminium oxide for aluminium smelting, glass, ceramic industry etc.
2. aluminium oxide for refractory, coating, abrasive applications.
3. aluminium oxide for electric basal plate, desiccating agent, chemical and pharmacy industry, etc.
aluminum oxide property:
It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency, acid and alkali resistance, good thermal stability. As the abrasive materials, it is suitable for grinding high-speed, high carbon steel, as loose grains, it widely used for bonded and coated abrasives , polishing, precision casting and so on .
white fused alumina grits&powder chemical composition
aluminum oxide property:
Soluble in water white solid. Odourless. Tasteless. Qualitative very hard. Easy absorption of moisture and not ChaoXie. Both sexes oxide, soluble in inorganic acid and alkaline solution, almost insoluble in water and the polar organic solvents. The relative density (d204) 4.0. Melting point about 2000 °C.
The physical and chemical analysis:
Main standard:
Alumina(industry grade) made by slkali-lime sintered,It is white powdered crystal with low assay of Ti, Mn, Zn, Cu, V, Zr, Cr, Li, Pb, B, P, etc.It is used in the production of fused salt eletrorefining aluminium, corundum eramics, refractories and other alumina chemical products.
Product Pictures:
If you’ve any enquiry please don’t hesitate to contact us!
- Q: How long is the duration of fire resistance of autoclaved flyash-lime bricks?
- How long is the duration of fire resistance of autoclaved flyash-lime bricks?
- Q: How much is refractory spraying coatings?
- This depends on whether you use the thin coatin or thick coating. Then it depends whether you use an aqueous coating or oily one. Usually thick aqueous coating is 2-3 dollars per kilogram. While the thin is six or seven dollars per kilogram. The oily coating is more than ten dollars. The prices obtained from the Internet is for reference only.
- Q: Does anyone know the refractory temperature of fire-resistant glass?
- Ordinary glass will be completely liquefied in the furnace of about 1100 degrees for half an hour and will not deform below 600 degrees. toughened glass fire-resistant glass is the product of ordinary glass after being processed Glass will mainly burst after encountering fire. When unevenly heated or encountering sudden drastic changes in temperature, ordinary glass will burst if the sharp temperature difference is over 70-120 degrees and toughened glass will burst at 200 degrees. It is not yet clear of the bursting temperature for the refractory glass. (I hope this answer can help you!) Hope you adopt !)
- Q: How long is the fire resistant limit for ultra thin fire retardant coating?
- There is no detailed stipulation for ultra-thin fire retardant coating, and the thickness of the inside is the fire resistance limit shall reach certain time(at least). In engineering, the thickness of the fire retardant coating is generally determined according to the manufacturer's testing report. We use thin fire retardant coating for steel structure: if the fireproof limit is 2.5 hours. the thickness should be 4.9mm. If fire-resistant limit is 2 hours, the thickness shall be 3.5mm. If the refractory limit is 1.5 hours, the thickness shall be 1.75mm. If the limit is 1.0, the thickness is 1.17mm hope my answer can help you
- Q: What type of firebrick does TZ-3 represent?
- Z represents a straight brick, T stands for common brick, common straight standard brick, -3 represents the length, and the specification is 230 * 114 * 65 (mm).
- Q: How long usually will the A-level fireproof materials prevent the flame?
- The classification of A-level materials is based on GB8624 - 2006 building materials and products combustion performance of grading method. Specific technical requirements are: 1, temperature ≤30 degrees; mass loss rate ≤50%; continuous burning time is 0; 2, the gross calorific value of main components, overall products, external non-substantial components ≤2.0MJ / kg; any internal non-substantial component ≤1.4MJ / kg;
- Q: Which refractory quality inspection authority is good?
- National testing agencies include National Refractory Inspection Center (i.e. LIRR), China Building Materials Academy (Guanzhuang, Beijing), National Center for Ceramic and Refractory Materials Inspection (Shandong) and China Metallurgical Research Institute (Beijing).
- Q: What is shapeless refractory with high performance?
- The popular ones are: Non-cement fine powder bonded castable is a functional refractory castable with nano material introduced.
- Q: What are the characteristics of clay refractory materials?
- Refractory clay refers to the refractory clay and bauxite, whose refractoriness is over 1580℃, which can be used as refractory materials. Apart from high refractoriness, they can maintain stability of volume under high temperature conditions and has resistance to slag, the sudden cold and hot, and mechanical strength, so after calcination, it can be abnormal firm.
- Q: What are the specifications of refractory kilns ?
- There several points need to be noted ① selection of body material. The refractory lining of the front kilneye turns gelid and hot rapidly and frequently, so the temperature is in the range of 800 ℃ ~ 1250 ℃, allowing it to withstand wear of the cement clinker and corrosion of the cement base. The body material of castable refractory must be chosen according to its service conditions, in order to ensure that it is cheap and easy to use. ② the selection of admixture. Shapeless refractory materials are typical in-situ reaction refractories. Therefore choosing admixtures is very important and must ensure workability, baking performance, and excellent material properties. Admixture for Kiln refractory castable includes dispersants, accelerators, plasticizers, sintering agent, bulking agent and antidetonant. Materials of sintering agent are animate clay, zirconite, titanium dioxide and Peng compounds. Such substances produce a certain amount of mullite crystals, zircon phase, titanium aluminate crystal and inconsistent melting compounds (2Al2O3 ? B2O3), etc. under the operating temperature and in situ reaction. They are accompanied by volume expansion and microcracks, enabling it to compensate for the sintering shrinkage, so that the casting material can have sintering strength, corrosion resistance and good thermal shock resistance. In summary, the refractory castable material for the rotary kiln shall be determined in accordance with its service conditions. It is recommended that clients should also communicate with technical personnels and sales staff about some facts of the rotary kiln when buying it, so that they can get the satisfying rotary kiln.
Send your message to us
High Purity Whiteness Aluminium Powder Al2O3 for Refractory Raw Materials
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
