High Glossy Polished Porcelain Tile Pilate Serie

Ref Price:
Loading Port:
Guangzhou
Payment Terms:
TT OR LC
Min Order Qty:
500 m²
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Product Brief Introduction

 

HIGH GLOSSY POLISHED PORCELAINT TILE PULATI STONE NANO SERIE is one of the most popular series of Polished Porcelain Tile in the present market. There are mainly 5 colors available. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

 

Product Features

 

  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl

 

Production Line & Package 

 

High Glossy Polished Porcelain Tile Pilate Serie

High Glossy Polished Porcelain Tile Pilate Serie

 

FAQ

 

1.    Can the polished porcelain tile be cut into Step & Riser tile, skirting tile?

—— Yes, it can be. In the market the normal size of skirting is 15*60cm and the basic step and riser size is 33*100*15cm. These items are widely used in apartment projects. 

 

2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.

 

3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.

 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Installing beadboard over ceramic tile?
How To Install Beadboard
Q:how do i do flooring with broken tiles??
I suggest that you first prep and fill your concrete and let dry. Next you should lay out some tile pieces on an area near your starting point fitting the pieces together like a jigsaw puzzle. Next spread some tile mastic over an area equal to the size of the area where you have laid out tile pieces that fit together. Next, quickly set the tiles in the mastic in the same pattern that you had them laid off to the side leaving at least about 1/8th gaps between the tile pieces. When you are finished, scrape off any mastic that does not have tile set in it. Repeat this process until you completely cover your floor. Allow to dry for a day and then fill the cracks with grout. Allow the grout to dry for a day and then do an acid wash to remove the grout residue.
Q:Newbie tiling question?
Get the proper trowels for the size of tile your doing. Get the proper drill and paddle to mix the thin set Mix the grout by hand or you ll incorporate air into the grout , weakening it.. They don t always show the proper way to lay out tile. Speed squares come in handy, Use a fine tipped marker, pencil marks will come off most tile doing it through a wet saw. Rent a wet saw or if you plan on tiling again, save money in the long run and buy a medium grade saw. With a stand if possible. Any questions you can e mail me through my avatar and check my qualifications there. GL Btw I ll edit my post if I come up with some other hints, I m sure there are.
Q:Ceramic Floor Tile in kitchen appears to be wearing and can not be cleaned?
Sounds like whoever installed the tile did not use floor tile, they are the same color top to bottom, throughout. The tile you now have sounds like wall tile and only has the coloration on the top of the tile. You have two possible solutions to this problem. Replace the tile, or a cheaper fix that will not be permanent, is to finish the floor with semigloss polyurethane which will also wear out. High gloss will be very slick when wet, but depending on the sheen of the current tile you may decide to use that instead. The polyurethane will slightly change the color of your floor, and should be considered when you make your decision.
Q:Help with tiling on walls?
A very common decision to make when re-tiling is whether to tile over existing tile or remove the old tiles first. It is quite common to tile over existing tile, and should not be a problem, but there are a few points to bear in mind, or worth considering. If tiling over tile The existing tiles must be soundly bonded to the walls. Obviously, no matter how well fixed the new tiles are, if the old tiles de-bond from the wall and fall off, then so will the new ones. Make sure the old tiles are well fixed. One way to check is to gently tap them. If it sounds very hollow then they are likely not well bonded. Pay particular attention to wet areas which are more likely to have problems. The existing tiles need to be clean and free of grease or other contaminants which could affect the bond of the adhesive used for the new tiles. Some backgrounds such as plaster and plasterboard have a recommended weight limit for a square unit of measurement. That means that for instance plasterboard will have a maximum weight of tiles or stone you can fix to it, which if surpassed may cause a structural failure. This is unlikely to be a problem if both old and new tiles are smaller format, thinner tiles, but could be an issue if using large format, heavier tiles on top. It especially likely to be a problem with natural stone tiles which tend to be heavier due to their thickness. Only certain tile adhesives are suitable for tile on tile. Check manufacturers instructions .
Q:How does Tengzheng build tiles on the elevations?
Path: In the day of typing the H shortcut key, the tile fill dialog box appears, click on the sample options, fill the pattern tray, and then click on other predefined, find the appropriate pattern,
Q:Is there any kind of coating to change ceramic tile color?
With no offense to you or others who answer, the answer truly is NO, not to any satisfactory level! After installing thousands of sq. ft. of tile, and applying thousands of gallons of paint, AND UNDERSTANDING the properties of fired, glazed tile, I share this. It's essentially GLASS. Without much detail regarding color I'm going to assume you're talking about individual tiles interspersed among a base color tile. Also without knowing the substrate, there is an option. If you can match the base color tiles, and live with them, you can use a diagonal grinder to remove the surrounding grout, around the offensive color tiles, chip them out carefully, and after cleaning the substrate, install new. Certainly that can be applied to NOT matching tile pieces as well. Allow the mastik proper drying time, re-grout, and hopefully be OK with it. If that seems too easy, or difficult, you should consider other PATTERN options, since it's possible you'll damage base color tiles, OR, again, see if that base color is still available. For that you may have to go to a manufacturer, which may be difficult since many are in Europe and/or Mexico. Steven Wolf
Q:I want to get rid of bathroom and kitchen linulium and replace them with tiles.?
Are you talking ceramic tiles? Remove the baseboards and use a blow dryer or heat gun and a wide metal putty knife to remove the linoleum. Have a trash can next to you to deposit the linoleum. Once you have that all done email me and I'll tell you what else you need to do. Is the linoleum on concrete or wood subfloor?
Q:any ideas on how to get grout of my tile floor?
You didn't mention how thick it was. You might be able to very carefully chip it off with a putty knife if thick. if just a thin layer try laying a very wet sponge on top of it, it may loosen it to where you can wipe it up. This is what you should have done in the first place. When grouting you do small section at a time, wipe the grout into the tiles with a sponge and then wipe up the excess and go on to another area. You can do about 3 square feet at a time. All ways have a bucket of water handy for this purpose.
Q:how do you remove asbestos floor tiles?
well, if you don't remodel then you are ok without a permit. Otherwise the legal thing to do is call an expert to removed them. I would be careful not to cause any airborne particles to breath and remove them yourself. Spray water on it, then dispose it in a trash bag. The each trash pick up, would throw out a little at time. The asbestos removers do that anyway.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range