High-efficiency industry crusher for bauxite ore From China !!!
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 6000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery
Packaging Details: | High alumina calcined bauxite ore Waterproof and seaworthy in ton bag, two bags per pallet |
Delivery Detail: | Based on order |
Calcined Bauxite for aluminate cement
1.Introduction
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
2.Grade
grade | Al2O3 content | Fe2O3 content | TiO2 content | K2O+Na2O content | CaO+MgO content | bulk density |
75 | 75%min | ≤ 3.0% | ≤ 4.0% | ≤ 0.3% | ≤ 0.5% | ≥ 2.70 |
80 | 80%min | ≤ 3.0% | ≤ 4.0% | ≤ 0.3% | ≤ 0.5% | ≥ 2.80 |
85 | 85%min | ≤ 2.0% | ≤ 4.0% | ≤ 0.3% | ≤ 0.5% | ≥ 3.00 |
86 | 86%min | ≤ 2.0% | ≤ 4.0% | ≤ 0.3% | ≤ 0.5% | ≥ 3.10 |
87 | 87%min | ≤ 2.0% | ≤ 4.0% | ≤ 0.3% | ≤ 0.5% | ≥ 3.20 |
88 | 88%min | ≤ 1.8% | ≤ 4.0% | ≤ 0.25% | ≤ 0.5% | ≥ 3.25 |
90 | 90%min | ≤ 1.8% | ≤ 4.0% | ≤ 0.25% | ≤ 0.5% | ≥ 3.30 |
3.Application
mainly used in aluminium metallurgy,aiso used in abrasive ,cement ,chemical, refractory
Product Description
High grade calcined bauxite used for raw material of kinds of refractory products and monolithic series.
- Q:How to remove the bottom of coke steel
- So that the whole place to restore the original black dye can be done.Water sandpaper rubbing can of course, but in the end to more than 1000 mesh water sandpapering. Another 100 clean cloth polishing line. The coke on the stove can only be removed by hand.Finally, wash the rice cooker, stove, as well as your tired hands, thoroughly washed several times. Here, everything is back to normal, as if nothing had happened.
- Q:What is the effect of coke moisture on the blast furnace?
- The influence of coke moisture on blast furnace can be divided into two parts:
- Q:Do not understand why some of the indicators of coke is the cause of the full analysis of phosphorus or foundry use of this time?It is best to use the foundry requirements? Thank you
- Foundry coke is used in cupola melting iron will fuel. Because the blast furnace cupola and metallurgical industry is different, only melting effect, without reduction reaction, the furnace is not so dephosphorization, the phosphorus in coke, some will come back to this in the metallurgical molten iron, called "Rephosphorized", this is decided by the principle of thermodynamics and kinetics. To make the original low phosphorus iron phosphorus increased harmful phosphorus. Therefore, the general foundry to buy Coke require low phosphorus coke. Some foundry with part of lime and dolomite in dephosphorization of iron in cupola, in the process, can relax the requirements for coke. However, this is suitable for large-scale, continuous production of iron.
- Q:What's the connection between coking coal and coke
- Coke: the quality is hard and the hole is thick, the short hair will be wiped awayCoking coal is a kind of bituminous coal with medium caking property and strong caking property. The title of bituminous coal with high degree of coalification. Main coking coal.
- Q:What are the indicators of first grade coke and the two grade coke?
- No greater than 12 is not greater than 0.6 not less than 80 not greater than 8 not greater than 1.9
- Q:What are the uses of these early industrial iron and steel? Any difference?What kind of carbon do we eat in the middle of a long strip of carbon?
- Coal:The use of coal is very extensive, according to the purpose of its use for three main purposes:(1) power coal,(2) coking coal,(3) coal used in coal chemical industry, which mainly includes gasification coal, coal for low temperature carbonization, hydrogenation of liquefied coal and so on.
- Q:How to calculate the average particle size of coke
- That is, "(volume) of the table of the percentage, in addition to the corresponding boundary value", these values are added, then the countdown. For example, the boundary 0 to 1 has a value of 10%, between 1 and 2, and between 2 and 4 has a value of 40%, and between 4 and 8, then D (3,2) = / (0.1/0.5 + 0.3/1.5 + 0.4/3 + 0.2/6) = 1/ (+ + 0.2 + + + 0.13 + +) = 1/0.56 = = =
- Q:Why does Coke provide heat when it is fired, it reacts only at high temperatures and why it is needed to provide heat?Which is the exothermic reaction, carbon dioxide or carbon monoxide?
- Yes;To restore the Fe reaction to provide heat, this reaction requires a higher heat, but the heat is high, the heat is not high enough to provide; so adding coke, more convenient to raise the temperature;
- Q:What does the M40% and M25% mean in the analysis of coke?
- (2) mainly used in: Coal Science and Technology (first level), coal processing and utilization (level two), coal chemistry and coal quality analysis (level three)
- Q:What are the national standards for grade two coke?
- All of these are the main indicators, and the water is not the quality evaluation index. The other is the coke reactivity: no more than 35%; after the reaction intensity: not less than 50%
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High-efficiency industry crusher for bauxite ore From China !!!
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 6000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords