High Aluminum Clay Refractory Bricks for Electric Heating Wires Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Aluminum Clay Refractory Bricks for Electric Heating Wires Furnace
Specifications
1.long service time.
2.competitive price.
3.best service
4.one piece can be order
| ItemBrand/Index | Apparent porosity (%) | Bulk density(g/cm3) | Cold crushing strength(Mpa) | Refractoriness under load(T2,°C) | Thermal shock resistance(1100°C,Water Cold) | SiC(%) |
Standard value | ≤20 | ≥2.5 | ≥80 | ≥1600 | Best | ≥85 |
Typical value | 18 | 2.55 | 90 | 1650 | Best | 88 |
Production & Quality
1.Production Process
Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packing shipment
2.Quality Control
a.According to the chemical content,raw materials are classified into different levels to ensure quality of brick first.
b.During the production,every brick will be weighed twice strictly to reduce the error of weight .
c.Before delivery, the inspectors will inspect the size,appearance,physical and chemical properties of brick again in factory.
F&A
Q1.Are you a manufacture or trader?
A:To be honest we are a trader,but we have stable cooperation factories.And we can supply good pre-sale service, after-sales service.
Q2.Can we visit your company?
A:Sure,welcome at any time,seeing is believing.
Q3. Do you provide samples?
Yes, samples are available.
Q4. Do you accept OEM?
Yes, we can do OEM.
Q5.What's the MOQ of trial order?
A:No limit,We can offer the best suggestions and solutions according to your condition.
Q6.What are the payment terms?
Usually T/T,but L/C,Western Union etc are available for us.
Q7. How long is delivery time?
The delivery time will be determined according to the quantity of the order.
Q8.How are your products’ quality?
The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q9.How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
Q10.What is the service life of your bricks?
A:The service life of different bricks is unlike.It also depends on your using condition and method.
Q11.How about your company's certification?
A:ISO9001 and Test Report,also we could apply other necessary certification.
- Q:What materials are used for roof insulation?
- The other one is inorganic insulation materials, such as Portland, rare earth insulation, the thickness should be 5 cm or more, up to the high cost of auxiliary materials of construction, to reinforce, new inorganic insulation material, the material thickness, on the line of 2-3 cm, direct smear on the top of the house, without auxiliary material, than the price of wool, high aluminum silicate cotton.
- Q:What are the high aluminum bricks made of?
- The amount of refractory mud accounts for about 6% of the brick weight
- Q:What is the density of a super high alumina brick and what is the price?
- Super high alumina brick, alumina content of 80% bricks, bulk density of 2.7g/cm3 or more, the factory price of about 1900 yuan
- Q:What is the difference between metal compounds and metal solid solutions?
- A series of intermetallic compounds occurring between transition metals in intermetallic compounds. The most important are L sigma sigma phase and ves phase, they are topologically close packed (TcP) phase, they consist of a small atomic radius of a dense layer, which is inlaid with a large atomic radius of atomic structure, this is a highly dense pile. In addition to atomic size factors, their formation is also influenced by the concentration of electrons.
- Q:Use of high alumina refractory bricks?
- Because of the high Al2O3 high aluminum products, low impurity content, the formation of fusible vitreous body less so than the clay brick high load softening temperature, but because mullite crystallization has not formed the network organization, so the load softening temperature is not high silica brick.
- Q:What are the categories of bricks?
- In a proper ratio of lime sand brick and quartz sand, sand or fine sand, the ground, Kazumi Wa, semi dry pressing and autoclaved curing and. The fly ash brick is made of fly ash as main raw material and mixed with cement material such as coal gangue, stone powder or clay. It is made up of batching, molding, drying and roasting. It can make full use of industrial waste residue and save fuel.
- Q:Which thermal shock stability of clay brick and high alumina brick is good?
- Generally, the thermal shock resistance of high alumina brick products is worse than that of clay brick products
- Q:What is the heat preservation material used in a laboratory furnace?
- Thermal insulation cotton is a high-purity clay clinker, alumina powder, silica powder, chromium sand and other raw materials in the industrial furnace melting at high temperature, forming fluid. Then, compressed air is used to blow or use the wire throwing machine to turn the yarn into a fiber shape. After the cotton collector is collected, the cotton is formed into a heat preservation cotton.The high alumina brick is usually made of high alumina clinker with small amount of clay. After grinding, the high alumina brick is poured and shaped in the form of slurry by the way of gas generation or foam, and it is burnt at 1300~1500 DEG C. Sometimes industrial alumina can be used instead of some bauxite clinker. Used for lining and insulation of masonry kilns, as well as for areas where there is no strong, high temperature molten material erosion and erosion. When contacting the flame directly, the surface contact temperature shall not be higher than 1350 degrees centigrade.
- Q:The difference between aluminium refractory and magnesia refractory
- Therefore, the difference between the two is a neutral, one is alkaline, the original product is different naturally.
- Q:How high can aluminum bricks expand at 80O degrees of heat?
- The expansion of high alumina brick is not only related to temperature, but also related to its material composition. The refractory temperature of high alumina brick is above 1770 centigrade. The temperature of 800 DEG C has little influence on the expansion of high alumina brick.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
High Aluminum Clay Refractory Bricks for Electric Heating Wires Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
